Configure An Ipv6 Anycast Address - HP 10500 Series Configuration Manual

If you delete the manually assigned address, the automatically generated link-local address is
validated.
To configure automatic generation of an IPv6 link-local address for an interface:
Step
1. Enter system view.
2. Enter interface view.
3. Configure the interface
to automatically
generate an IPv6
link-local address.
To configure an IPv6 link-local address manually:
Step
1. Enter system view.
2. Enter interface view.
3. Configure an IPv6
link-local address
manually.
After an IPv6 global unicast address is configured for an interface, a link-local address is generated
automatically.
The automatically generated link-local address is the same as the one generated by using the ipv6
•
address auto link-local command.
If a link-local address is manually assigned to an interface, this manual link-local address takes
•
effect. If the manually assigned link-local address is removed, the automatically generated link-local
address takes effect.
The undo ipv6 address auto link-local command only removes the link-local addresses generated
through the ipv6 address auto link-local command.
If an IPv6 global unicast address is already configured for an interface, the interface still has a
•
link-local address because the system automatically generates one for the interface.
• If no IPv6 global unicast address is configured, the interface has no link-local address.

Configure an IPv6 anycast address

Step
1. Enter system view.
Command
system-view
interface interface-type
interface-number
ipv6 address auto link-local
Command
system-view
interface interface-type
interface-number
ipv6 address ipv6-address
link-local
Command
system-view
117
Remarks
N/A
N/A
Optional.
By default, no link-local address is
configured on an interface.
After an IPv6 global unicast address is
configured on the interface, a link-local
address is generated automatically.
Remarks
N/A
N/A
Optional.
By default, no link-local address is
configured on an interface.
After an IPv6 global unicast address is
configured on the interface, a link-local
address is generated automatically.
Remarks
N/A