Step 5 Protect the record files.
1) Find the record files you want to protect, and then click the
indicating that the file is locked.
The record files of which the recording is still not completed cannot be locked.
2) Click
5.10.2
Step 1 Enter HDD setting interface.
Menu> HDD
Step 2 Click
to edit the HDD you want to protect.
To edit HDD property, you need to set the storage mode of the HDD to Group. See
Chapter Managing HDD Group.
Step 3 Set the HDD property to Read-only.
Network Video Recorder User Manual
to change it to to unlock the file and the file is not protected.
Figure 5-33 Unlocking Attention
Setting HDD Property to Read-only
Figure 5-34 HDD General
Figure 5-35 HDD General- Editing
icon which will turn
,