Click Refresh button if the connected local backup device cannot be displayed. When it
fails to detect the backup device, please check whether it is compatible with the NVR. You
can format the backup device if the format is incorrect.
Packet Step 4 Click Export button to start exporting.
Step 5 After the exporting is complete, click OK to finish the packet export, as shown in
Figure 12-34.
Up to 1M data can be exported each time.
12.4.3
Purpose:
You can also check the network status and quick set the network parameters in this
interface.
Steps:
Click the Status button on the lower- right corner of the page.
Network Video Recorder User Manual
Figure 12-33 Export Network
Figure 12-34 Packet Export Attention
Checking the Network Status