Configuring Privacy Mask - Vezco VZ-NVR3200-4HD Quick Start Manual

Configuring Privacy Mask

14.2
Purpose:
You are allowed to configure the four-sided privacy mask zones that cannot be
viewed by the operator. The privacy mask can prevent certain surveillance areas to be
viewed or recorded.
Step 1 Enter the Privacy Mask Settings interface.
Menu > Camera >Privacy Mask
Step 2 Select the camera to set privacy mask.
Step 3 Click the checkbox of Enable Privacy Mask to enable this feature.
Step 4 Use the mouse to draw a zone on the window. The zones will be marked with
different frame colors.
Up to 4 privacy masks zones can be configured and the size of each area can be adjusted.
Step 5 The configured privacy mask zones on the window can be cleared by clicking the
corresponding Clear Zone1-4 icons on the right side of the window, or click Clear All
to clear all zones.
Network Video Recorder User Manual
Figure 14-2 Privacy Mask Settings Interface