Configuring Video Parameters - Vezco VZ-NVR3200-4HD Quick Start Manual

Configuring Video Parameters

14.3
Purpose:
You can customize the image parameters including the brightness, contrast, saturation,
image rotate and mirror for the live view and recording effect.
Step 1 Enter the Image Settings interface.
Menu > Camera >Image
Step 2 Select the camera to set image parameters.
Step 3 Adjust the slider or click on the up/down arrow to set the value of the brightness,
contrast or saturation.
Step 4 Select the Enable Rotate function to Clockwise 270 degrees or OFF. When OFF
is selected, the image is restored to original.
Step 5 Select the Mirror Mode to Left-Right, Up-Down, Center or OFF. When OFF is
selected, the image is restored to original.
 The Rotate and Mirror functions must be supported by the connected IP camera.
 The image parameters adjustment can affect both the live view and the recording
quality.
Step 6 Click the Apply button to save the settings.
Network Video Recorder User Manual
Figure 14-4 Image Settings Interface