Checking Network Traffic - Vezco VZ-NVR3200-4HD Quick Start Manual

Step 2 Check the checkbox of the Enable Virtual Host.
Step 3 Click the Save button to save the setting.
Step 4 Enter the IP camera management interface of NVR. The Connect column
appears on the right-most side of the camera list, as shown in the Figure 12-29.
Configuration > Remote Configuration > Camera Management > IP Camera
Step 5 Click the link and the page of IP camera management appears.

12.3 Checking Network Traffic

Purpose:
You can check the network traffic to obtain real-time information of NVR such as linking
status, MTU, sending/receiving rate, etc.
Step 1 Enter the Network Traffic interface.
Menu > Maintenance > Net Detect
Step 2 You can view the sending rate and receiving rate information on the interface.
The traffic data is refreshed every 1 second.
Network Video Recorder User Manual
Figure 12-29 Connect to IP Camera
Figure 12-30 Network Traffic Interface