Configuring Advanced Settings; Configuring Cloud P2P - Vezco VZ-NVR3200-4HD Quick Start Manual

12.2 Configuring Advanced Settings

12.2.1
Purpose:
The Cloud P2P provides the mobile phone application and as well the service platform
page to access and manage your connected NVR, which enables you to get a convenient
remote access to the surveillance system.
Step 1 Enter the Network Settings interface.
Step 2 Menu > Configuration > Network
Step 3 Select the Platform Access tab to enter the Cloud P2P Settings interface.
Step 4 Check the Enable checkbox to activate this feature.
Step 5 (Optional) If required, select the checkbox of Custom and input the Server
Address. The default server address is dev. hicloudcam.com.
Step 6 To turn the Enable Stream Encryption on, you can select its checkbox.
Step 7 Enter the Verification Code of the device.
The verification code consists of 6 capital letters and is located at the bottom of the DVR.
You can also use the scanning tool of your phone to quickly get the code by scanning the
QR code below.
Step 8 Click the Apply button to save and exit the interface.
After configuration, you can access and manage the NVR by your mobile phone on
which the Cloud P2P application is installed.
Network Video Recorder User Manual

Configuring Cloud P2P

Figure 12-2 Cloud P2P Settings Interface