Editing The Connected Ip Cameras And Configuring Customized Protocols - Vezco VZ-NVR3200-4HD Quick Start Manual

2.3.3 Editing the Connected IP Cameras and
Configuring Customized Protocols
After the adding of the IP cameras, the basic information of the camera lists in the page,
you can configure the basic setting of the IP cameras.
Step 1 Click the
and other parameters.
Channel Port: If the connected device is an encoding device with multiple channels,
you can choose the channel to connect by selecting the channel port No. in the
dropdown list.
Step 2 Click OK to save the settings and exit the editing interface.
 To edit advanced parameters:
Step 1 Drag the horizontal scroll bar to the right side and click the
Network Video Recorder User Manual
icon to edit the parameters; you can edit the IP address, protocol
Figure 2-33 Edit the Parameters
icon.