3.1 Introduction of Live View
Live view shows you the video image getting from each camera in real time. The NVR
automatically enters Live View mode when powered on. It is also at the very top of the
menu hierarchy, thus pressing the ESC many times (depending on which menu you're
on) brings you to the Live View mode.
Live View Icons
In the live view mode, there are icons at the upper-right of the screen for each channel,
showing the status of the record and alarm in the channel, so that you can know whether
the channel is recorded, or whether there are alarms occur as soon as possible.
Icons
Network Video Recorder User Manual
Chapter 3 Live View
Table 3-1 Description of Live View Icons
Description
Alarm (video loss, video tampering, motion detection, VCA
and sensor alarm)
Record (manual record, schedule record, motion detection,
VCA and alarm triggered record)
Alarm and Record
Event/Exception (motion detection, VCA, sensor alarm or
exception information, appears at the lower-left corner of the
screen. Please refer to Chapter 8.6 Setting Alarm Response
Actions for details.)
70