Configuring Network Detection; Testing Network Delay And Packet Loss; Exporting Network Packet - Vezco VZ-NVR3200-4HD Quick Start Manual

12.4 Configuring Network Detection

Purpose:
You can obtain network connecting status of NVR through the network detection function,
including network delay, packet loss, etc.
12.4.1
Step 1 Enter the Network Traffic interface.
Menu >Maintenance>Net Detect
Step 2 Click the Network Detection tab to enter the Network Detection menu, as shown
in Figure 12-31.
Step 3 Enter the destination address in the text field of Destination Address.
Step 4 Click Test button to start testing network delay and packet loss. The testing result
pops up on the window. If the testing is failed, the error message box will pop up
as well. Refer to Figure 12-32.
Figure 12-32 Testing Result of Network Delay and Packet Loss
12.4.2
Purpose:
By connecting the NVR to network, the captured network data packet can be exported to
USB-flash disk, SATA/eSATA, DVD-R/W and other local backup devices.
Step 1 Enter the Network Traffic interface.
Menu >Maintenance>Net Detect
Step 2 Click the Network Detection tab to enter the Network Detection interface.
Step 3 Select the backup device from the dropdown list of Device Name, as shown in Figure
12-33.
Network Video Recorder User Manual

Testing Network Delay and Packet Loss

Figure 12-31 Network Detection Interface

Exporting Network Packet