8.1 Setting Motion Detection Alarm
Step 1 Enter Motion Detection interface of Camera Management and choose a camera you
want to set up motion detection.
Menu> Camera> Motion
Interface Step 2 Set up detection area and sensitivity.
Tick "Enable Motion Detection", use the mouse to draw detection area(s) and drag
the sensitivity bar to set sensitivity.
Click
button and set alarm response actions.
Step 3 Click Trigger Channel tab and select one or more channels which will start to
record/capture or become full-screen monitoring when motion alarm is triggered, and
click Apply to save the settings.
Network Video Recorder User Manual
Chapter 8 Alarm Settings
Figure 8-1 Motion Detection Setup
Figure 8-2 Set Trigger Camera of Motion Detection