Please refer to the Chapter 9.2 Face Detection for operating steps to configure
the scene change detection.
The Sensitivity in the Rule Settings ranges from 1 to 100, and the higher the
value is, the more easily the change of scene can trigger the alarm.
10.11Defocus Detection
Purpose:
The image blur caused by defocus of the lens can be detected, and some certain actions
can be taken when the alarm is triggered.
Please refer to the Chapter 9.2 Face Detection for operating steps to configure the
defocus detection.
The Sensitivity in the Rule Settings ranges from 1 to 100, and the higher the
value is, the more easily the defocus image can trigger the alarm.
10.12PIR Alarm
Purpose:
A PIR (Passive Infrared) alarm is triggered when an intruder moves within the detector's
field of view. The heat energy dissipated by a person, or any other warm blooded
creature such as dogs, cats, etc., can be detected.
Step 1 Enter the VCA settings interface.
Menu> Camera> VCA
Step 2 Select the camera to configure the VCA.
You can click the checkbox of Save VCA Picture to save the captured
pictures of VCA detection.
Step 3 Select the VCA detection type to PIR Alarm.
Step 4 Click
to configure the trigger channel, arming schedule and linkage action for the
PIR alarm.
Step 5 Click the Rule Settings button to set the rules. Please refer to the Chapter 9.2 Face
Detection
for instructions.
Step 6 Click Apply to activate the settings.
Network Video Recorder User Manual