Chapter 2 Getting Started; Device Startup And Activation; Starting Up And Shutting Down The Nvr - Vezco VZ-NVR3200-4HD Quick Start Manual

2.1 Device Startup and Activation

2.1.1 Starting Up and Shutting Down the NVR

Purpose:
Proper startup and shutdown procedures are crucial to expanding the life of the NVR.
Before you start:
Check that the voltage of the extra power supply is the same with the NVR's requirement,
and the ground connection is working properly.
Starting up the NVR:
Step 1 Check the power supply is plugged into an electrical outlet. It is HIGHLY
recommended that an Uninterruptible Power Supply (UPS) be used in conjunction
with the device. The Power indicator LED on the front panel should be red,
indicating the device gets the power supply.
Step 2 Press the POWER button on the front panel. The Power indicator LED should
turn blue indicating that the unit begins to start up.
Step 3 After startup, the Power indicator LED remains blue. A splash screen with the
status of the HDD appears on the monitor. The row of icons at the bottom of the
screen shows the HDD status. 'X' means that the HDD is not installed or cannot be
detected.
Shutting down the NVR
Steps:
There are two proper ways to shut down the NVR.

OPTION 1: Standard shutdown
Step 4 Enter the Shutdown menu.
Menu > Shutdown
Step 5 Click the Shutdown button.
Network Video Recorder User Manual

Chapter 2 Getting Started

Figure 2-1 Shutdown Menu