Configuring Redundant Recording And Capture - Vezco VZ-NVR3200-4HD Quick Start Manual

5.8 Configuring Redundant Recording and Capture

Purpose:
Enabling redundant recording and capture, which means saving the record files and
captured pictures not only in the R/W HDD but also in the redundant HDD, will effectively
enhance the data safety and reliability. .
Step 1 Enter HDD Information interface.
Menu> HDD
Step 2 Select the HDD and click
Set the HDD property to Redundancy.
1)
2) Click Apply to save the settings.
3) Click OK to back to the upper level menu.
You must set the Storage mode in the HDD advanced settings to Group before you set
the HDD property to Redundant. For detailed information, please refer to Chapter
11.4.1 Setting HDD Property. There should be at least another HDD which is in
Read/Write status.
Step 3 Enter the Record setting interface.
Menu> Record> Parameters
Select Record tab.
1)
Network Video Recorder User Manual
Figure 5-24 HDD General
to enter the Local HDD Settings interface.
Figure 5-25 HDD General-Editing