Setting Sensor Alarms - Vezco VZ-NVR3200-4HD Quick Start Manual

8.2 Setting Sensor Alarms

Purpose:
Set the handling action of an external sensor alarm.
Step 1 Enter Alarm Settings of System Configuration and select an alarm input.
Menu> Configuration> Alarm
Select Alarm Input tab to enter Alarm Input Settings interface.
Figure 8-4 Alarm Status Interface of System Configuration
Step 2 Set up the handling action of the selected alarm input.
Check the Enable checkbox and click Settings button to set up its alarm response
actions.
Step 3 (Optional) Enable the one-key disarming for alarm input 1 (Local<-1).
3) Check the checkbox of Enable One-Key Disarming.
4) Click the Settings button to enter the linkage action settings interface.
5) Select the alarm linkage action (s) you want to disarm for alarm input1. The selected
linkage actions include the Full Screen Monitoring, Audible Warning, Notify Surveillance
Center, Send Email and Trigger Alarm Output.
Network Video Recorder User Manual
Figure 8-5 Alarm Input Setup Interface