Configuring Email - Vezco VZ-NVR3200-4HD Quick Start Manual

Property Step 7 Check the checkbox to enable the HTTPS function.
Step 8 Click the Save button to save the settings.
12.2.7
Purpose:
The system can be configured to send an Email notification to all designated users if
an alarm event is detected, etc., an alarm or motion event is detected or the
administrator password is changed.
Before configuring the Email settings, the NVR must be connected to a local area network
(LAN) that maintains an SMTP mail server. The network must also be connected to either
an intranet or the Internet depending on the location of the e-mail accounts to which you
want to send notification.
Step 1 Enter the Network Settings interface.
Menu >Configuration> Network
Step 2 Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS
Server in the Network Settings menu, as shown in Figure 12-20.
Step 3 Click Apply to save the settings.
Step 4 Select the Email tab to enter the Email Settings interface.
Network Video Recorder User Manual
Figure 12-19 Installed Certificate

Configuring Email

Figure 12-20 Network Settings Interface