Configuring Https Port - Vezco VZ-NVR3200-4HD Quick Start Manual

When adding a device to the CMS (Client Management System) software, the
multicast address must be the same as the device's multicast IP.
 RTSP Port: The RTSP (Real Time Streaming Protocol) is a network control
protocol designed for use in entertainment and communications systems to
control streaming media servers.
Enter the RTSP port in the text field of RTSP Port. The default RTSP port is
554, and you can change it according to different requirements.
 Server Port and HTTP Port: Enter the Server Port and HTTP Port in the text
fields. The default Server Port is 8000 and the HTTP Port is 80, and you can
change them according to different requirements.
The Server Port should be set to the range of 2000-65535 and it is used for remote client
software access. The HTTP port is used for remote IE access.
Settings Step 4 Click the Apply button to save and exit the
interface.
12.2.6
Purpose:
HTTPS provides authentication of the web site and associated web server that one is
communicating with, which protects against Man-in-the-middle attacks. Perform the
following steps to set the port number of https.
Example:
If you set the port number as 443 and the IP address is 192.0.0.64, you may access the
device by inputting https://192.0.0.64:443 via the web browser.
The HTTPS port can be only configured through the web browser.
Step 1 Open web browser, input the IP address of device, and the web server will select
the language automatically according to the system language and maximize the
web browser.
Step 2 Input the correct user name and password, and click Login button to log in the
device.
Network Video Recorder User Manual
Figure 12-16 Configure More

Configuring HTTPS Port