Checking Hdd Status - Vezco VZ-NVR3200-4HD Quick Start Manual

Checking HDD Status

13.7
Purpose:
You may check the status of the installed HDDs on NVR so as to take immediate
check and maintenance in case of HDD failure.
Checking HDD Status in HDD Information Interface
Step 1 Enter the HDD Information interface.
Menu > HDD>General
Step 2 Check the status of each HDD which is displayed on the list, as shown in Figure 13-
25.
If the status of HDD is Normal or Sleeping, it works normally. If the status is
Uninitialized or Abnormal, please initialize the HDD before use. And if the HDD
initialization is failed, please replace it with a new one.
Checking HDD Status in HDD Information Interface
Step 3 Enter the System Information interface.
Menu >Maintenance > System Info
Step 4 Click the HDD tab to view the status of each HDD displayed on the list, as shown
in Figure 13-26.
Network Video Recorder User Manual
Figure 13-25 View HDD Status (1)