Chapter 5 Recording And Capture Settings; Configuring Parameters - Vezco VZ-NVR3200-4HD Quick Start Manual

Chapter 5 Recording and Capture
Settings

5.1 Configuring Parameters

Purpose:
By configuring the parameters you can define the parameters which affect the image
quality, such as the transmission stream type, the resolution and so on.
Before you start:
Make sure that the HDD has already been installed. If not, please install a
1)
HDD and initialize it. (Menu>HDD>General)
2) Check the storage mode of the HDD
Click Advanced to check the storage mode of the HDD.
If the HDD mode is Quota, please set the maximum record capacity and maximum
picture capacity. For detailed information, see Chapter Configuring Quota Mode.
If the HDD mode is Group, you should set the HDD group. For detailed information,
see
Chapter Configuring HDD Group for Recording and Capture.
Step 1 Enter the Record settings interface to configure the recording
parameters: Menu > Record > Parameters
Network Video Recorder User Manual
Figure 5-1 HDD- General
Figure 5-2 HDD- Advanced