Hot Spare Device Backup; Setting Hot Spare Device - Vezco VZ-NVR3200-4HD Quick Start Manual

7.3 Hot Spare Device Backup

Purpose:
The device can form an N+1 hot spare system. The system consists of several working
devices and a hot spare device; when the working device fails, the hot spare device
switches into operation, thus increasing the reliability of the system.
Please contact dealer for details of models which support the hot spare function.
Before you start:
At least 2 devices are online.
A bidirectional connection shown in the figure below is required to be built between the hot
spare device and each working device.
Set a hot spare
Start

7.3.2 Setting Hot Spare Device

 The camera connection will be disabled when the device works in the hot spare mode.
 It's highly recommended to restore the defaults of the device after switching the
working mode of the hot spare device to normal mode to ensure the normal
operation afterwards.
Step 1 Enter the Hot Spare settings interface.
Menu > Configuration > Hot Spare
Step 2 Set the Work Mode as Hot Spare Mode and click the Apply button to confirm the
settings.
Step 3 Reboot the device to make the change take effect.
Network Video Recorder User Manual
Add a hot spare
device on normal
device
device
Figure 7-13 Building Hot Spare System
Add the normal
device on the hot
spare device
Finish