6.1.4 Playing Back by Event Search
Purpose
Play back record files on one or several channels searched out by event type (e.g.,
alarm input, motion detection and VCA).
Step 1 Enter the Playback interface.
Menu>Playback
Step 2 Select the Event in the drop-down list on the top-left side.
Step 3 Select the stream to Main Stream or Sub Stream.
Step 4 Select the major type to Alarm Input, Motion, POS or VCA as the event type.
We take playback by VCA as the example in the following instructions.
Step 5 Select the minor type of VCA from the drop-down list. (Please refer to Chapter 9
VCA Alarm for the details of VCA detection types).
For configuring the VCA recording, please refer to Chapter 5.4 Configuring VCA Event
Recording and Capture; and for details of VCA detection types, please refer to Chapter
9 VCA Alarm.
Step 6 Select the camera (s) for searching, and set the Start time and End time.
Network Video Recorder User Manual
Figure 6-9 Event Search Interface