Editing Ip Cameras Connected To The Poe Interfaces - Vezco VZ-NVR3200-4HD Quick Start Manual

After adding the customized protocols, you can see the protocol name is listed in the
dropdown list, please refer to Figure 2-37.
Step 3 Choose the protocols you just added to validate the connection of the network
camera.

2.3.4 Editing IP Cameras Connected to the PoE Interfaces

This chapter is only applicable for the following models VZ-NVR-81080-P,
VZ-NVR-161080-P, VZ-NVR3200-4HD-P NVR.
The PoE interfaces enables the NVR system to pass electrical power safely, along with
data, on Ethernet cabling to the connected network cameras.
If you disable the PoE interface, you can also connect to the online network cameras.
And the PoE interface supports the Plug-and-Play function.
Example:
For VZ-NVR-81080-P, if you want to connect 6 network cameras via PoE interfaces and 2
online cameras, you must disable 2 PoE interfaces in the Edit IP Camera menu.
 To add Cameras for NVR supporting PoE function:
Before you start:
Connect the network cameras via the PoE interfaces.
Step 1 Enter the Camera Management interface.
Menu> Camera> Camera
Network Video Recorder User Manual
Figure 2-37 Protocol Setting