Adjusting The Set Speed - Toyota Camry 2018 Owner's Manual

268
4-5. Using the driving support systems

Adjusting the set speed

To change the set speed, operate the "+ RES" or "- SET" switch until
the desired set speed is displayed.
Increases the speed
1
(Except when the vehicle has been
stopped by system control in vehi-
cle-to-vehicle
mode)
Decreases the speed
2
Fine adjustment: Press the switch.
Large adjustment: Press and hold the switch to change the speed,
and release when the desired speed is reached.
In the vehicle-to-vehicle distance control mode, the set speed will be
increased or decreased as follows:
For U.S. mainland and Hawaii

Fine adjustment: By 1 mph (1.6 km/h)
the switch is pressed
Large adjustment: Increases or decreases in 1 mph (1.6 km/h)
*
2
(0.6 mph)
For Canada, Guam, Saipan and Puerto Rico

Fine adjustment: By 1 mph (1.6 km/h)
the switch is pressed
Large adjustment: Increases or decreases in 5 mph (8 km/h)
*
2
(3.1 mph)
In the constant speed control mode (P. 272), the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 mph (1.6 km/h)
the switch is pressed
Large adjustment: The speed will continue to change while the switch is
held.
*
1
: When the set speed is shown in "MPH"
*
2
: When the set speed is shown in "km/h"
distance control
increments for as long as the switch is held
increments for as long as the switch is held
*
1
or 1 km/h (0.6 mph)
*
1
or 1 km/h (0.6mph)
*
1
or 1 km/h (0.6 mph)
*
2
each time
*
1
or 1 km/h
*
2
each time
*
1
or 5 km/h
*
2
each time