Adjusting The Set Speed; Canceling And Resuming The Constant Speed Control - Toyota verso User Manual

■

Adjusting the set speed

To change the set speed, operate the lever until the desired set
speed is obtained.
The set speed will be increased or decreased as follows:
Fine adjustment: By approximately 1.6 km/h (1 mph) each time the
lever is operated.
Large adjustment: The set speed can be increased or decreased con-
tinually until the lever is released.
■

Canceling and resuming the constant speed control

VERSO_WE_OM64574E
2-4. Using other driving systems
Increase the speed
Decrease the speed
Fine adjustment: Momentarily
move the lever in the desired
direction.
Large adjustment: Hold the
lever in the desired direction.
Pulling the lever toward you
cancels the constant speed
control.
The speed setting is also can-
celed when the brakes are
applied or the clutch pedal
(manual transmission only) is
depressed.
Pushing the lever
resumes the constant
speed control.
Resuming is available when
the vehicle speed is more than
approximately 40 km/h (25
mph).
2
up
259