Changing Engine Switch Modes - Toyota Camry 2018 Owner's Manual

Changing engine switch modes

Modes can be changed by pressing the engine switch with the brake
pedal released. (The mode changes each time the switch is pressed.)
*
Off
1
The emergency flashers can be
used.
The multi-information display will
not be displayed.
ACCESSORY mode
2
Some electrical components such
as the audio system can be used.
A message indicating how to start
the engine will be displayed on the
multi-information display.
IGNITION ON mode
3
All electrical components can be used.
*
: If the shift lever is in a position other than P when turning off the engine,
the engine switch will be turned to ACCESSORY mode, not to off.
When stopping the engine with the shift lever in a position other
than P
If the engine is stopped with the shift lever in a position other than P,
the engine switch will not be turned off but instead be turned to
ACCESSORY mode. Perform the following procedure to turn the
switch off:
Check that the parking brake is set.
1
Shift the shift lever to P.
2
Check that "Turn Power Off" is displayed on the multi-information
3
display and then press the engine switch once.
Check that "Turn Power Off" on the multi-information display is
4
turned off.
4-2. Driving procedures
201
4