Programming A Rolling Code System - Toyota Camry 2018 Owner's Manual

Test the HomeLink
4
grammed button and observing the indicator light:
● Indicator light illuminates: Programming of a fixed code device
has completed. The garage door or other device should operate
when a HomeLink
● Indicator light flashes rapidly: The garage door opener motor or
other device is equipped with a rolling code. To complete pro-
gramming, firmly press and hold the HomeLink
onds then release it.
● If the garage door or other device does not operate, proceed to

"Programming a rolling code system".

Repeat the steps above to program another device for any of the
5
remaining HomeLink
Programming a rolling code system
■
2 or more people may be necessary to complete rolling code pro-
gramming.
Locate the "Learn" or "Smart"
1
button on the garage door
opener motor in the garage.
This button can usually be found
where the hanging antenna wire
is attached to the unit. The
name and color of the button
may vary
Refer to the Owner's manual
supplied with the garage door
opener motor for details.
Press and
2
"Learn" or "Smart" button.
Perform
3
onds after performing
®
operation by pressing the newly pro-
®
button is pressed and released.
®
buttons.
by manufacturer.
release the
within 30 sec-
.
2
5-4. Other interior features
®
397
button for 2 sec-
5