Table of Contents
Advertisement
296
4-5. Using the driving support systems
■
Turning off both TRAC and VSC systems
To turn the TRAC and VSC systems off, press and hold
seconds while the vehicle is stopped.
The VSC OFF indicator light will come on and the "Traction Control Turned
Off" will be shown on the multi-information display
Press
again to turn the systems back on.
*
: On vehicles with pre-collision system, pre-collision brake assist and pre-
collision braking will also be disabled. The pre-collision system warning
light will come on and the message will be shown on the multi-information
display. (P. 252)
■
When the message is displayed on the multi-information display show-
ing that TRAC has been disabled even if
TRAC cannot be operated. Contact your Toyota dealer.
■
Operating conditions of hill-start assist control
When the following four conditions are met, the hill-start assist control will
operate:
●
The shift lever is in a position other than P or N (when starting off forward/
backward on an upward incline)
●
The vehicle is stopped
●
The accelerator pedal is not depressed
●
The parking brake is not engaged
■
Automatic system cancelation of hill-start assist control
The hill-start assist control will turn off in any of the following situations:
●
The shift lever is shifted to P or N
●
The accelerator pedal is depressed
●
The parking brake is engaged
●
2 seconds at maximum elapsed after the brake pedal is released
for more than 3
*
.
has not been pressed
Advertisement
Table of Contents
Troubleshooting
