Brake Hold; Turns The Brake Hold System On; Brake Hold System Operating Conditions; Brake Hold Function - Toyota Camry 2018 Owner's Manual

Hide thumbs Also See for Camry 2018:
Table of Contents

Advertisement

Brake Hold

The brake hold system keeps the brake applied when the shift
lever is in D, S or N with the system on and the brake pedal has
been depressed to stop the vehicle. The system releases the
brake when the accelerator pedal is depressed with the shift
lever in D or S to allow smooth start off.

Turns the brake hold system on

The brake hold standby indicator
(green) comes on. While the sys-
tem is holding the brake, the brake
hold operated indicator (yellow)
comes on.
*
1
: Brake hold standby indicator
*
2
: Brake hold operated indicator

Brake hold system operating conditions

The brake hold system cannot be turned on in the following conditions:
The driver's door is not closed.
The driver is not wearing the seat belt.
If any of the conditions above are detected when the brake hold system is
enabled, the system will turn off and the brake hold standby indicator light will
go off. In addition, if any of the conditions are detected while the system is
holding the brake, a warning buzzer will sound and a message will be shown
on the multi-information display. The parking brake will then be set automati-
cally.

Brake hold function

If the brake pedal is left released for a period of about 3 minutes after the
system has started holding the brake, the parking brake will be set automat-
ically. In this case, a warning buzzer sounds and a message is shown on the
multi-information display.
To turn the system off while the system is holding the brake, firmly depress
the brake pedal and press the button again.
The brake hold function may not hold the vehicle when the vehicle is on a
steep incline. In this situation, it may be necessary for the driver to apply the
brakes. A warning buzzer will sound and the multi-information display will
inform the driver of this situation. If a warning message is shown on the
multi-information display, read the message and follow the instructions.
4-2. Driving procedures
*
*
1
2
217
4
: If equipped

Advertisement

Table of Contents
loading

Table of Contents