Toyota Camry 2018 Owner's Manual
Hide thumbs Also See for Camry 2018:
Table of Contents

Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Camry 2018 and is the answer not in the manual?

Questions and answers

Summary of Contents for Toyota Camry 2018

  • Page 3: Specifications

    Pictorial index Search by illustration For safety Make sure to read through them and security Instrument How to read the gauges and meters, the variety of cluster warning lights and indicators, etc. Operation of Opening and closing the doors and windows, each adjustment before driving, etc.
  • Page 4: Table Of Contents

    TABLE OF CONTENTS For your information....... 6 Operation of each Reading this manual ....10 component How to search......11 Pictorial index ......12 3-1. Key information Keys........126 For safety and security 3-2. Opening, closing and locking the doors Doors .........
  • Page 5: Table Of Contents

    ......350 cap ........231 Automatic air conditioning 4-5. Using the driving system (without “SYNC” support systems button) ......355 Toyota Safety Sense P ..235 Automatic air conditioning PCS (Pre-Collision system (with “SYNC” System)......242 button) ......361 LDA (Lane Departure Seat heaters ......369...
  • Page 6: Table Of Contents

    TABLE OF CONTENTS 5-3. Using the storage 6-2. Maintenance features Maintenance List of storage features..373 requirements ....420 General maintenance ..423 • Glove box...... 374 Emission inspection and • Console box ....374 maintenance (I/M) • Coin holder ....374 programs ......427 •...
  • Page 7: Table Of Contents

    Alphabetical index ......596 For information regarding the equipment listed below, refer to “NAV- IGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”. • Navigation system • Toyota parking assist monitor • Audio system • Panoramic view monitor • Rear view monitor system • Connected service...
  • Page 8: For Your Information

    Accessories, spare parts and modification of your Toyota A wide variety of non-genuine spare parts and accessories for Toyota vehi- cles are currently available in the market. You should know that Toyota does not warrant these products and is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
  • Page 9 ● Usage of data collected through Safety Connect (U.S. mainland only) If your Toyota has Safety Connect and if you have subscribed to those ser- vices, please refer to the Safety Connect Telematics Subscription Service Agreement for information on data collected and its usage.
  • Page 10: Event Data Recorder

    EDR. ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehi- cle) is obtained •...
  • Page 11 Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
  • Page 12: Reading This Manual

    Reading this manual WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. 1 2 3 Indicates operating or working procedures.
  • Page 13: How To Search

    How to search Searching by name ■ • Alphabetical index ..P. 596 Searching installation ■ position • Pictorial index....P. 12 Searching by symptom or ■ sound • What to do if... (Troubleshooting) ..P. 592 Searching by title ■ • Table of contents .....P. 2...
  • Page 14: Pictorial Index

    Pictorial index Pictorial index ■ Exterior Doors ......... . . P. 135 Locking/unlocking .
  • Page 15: Front Turn Signal Lights

    Pictorial index Windshield wipers ....... . . P. 227 Precautions for winter season ......P. 345 Fuel filler door .
  • Page 16: Instrument Panel

    Pictorial index ■ Instrument panel Engine switch....... . . P. 198, 200 Starting the engine/changing the positions or modes .
  • Page 17 Pictorial index Parking brake ....... . . P. 212, 213 Applying/releasing .
  • Page 18 Pictorial index ■ Switches Automatic High Beam switch ..... . P. 223 VSC OFF switch ........P. 295 1, 2 Camera switch Trunk opener switch .
  • Page 19 Pictorial index Meter control switches ......P. 88, 100 Paddle shift switches ......P. 205 Vehicle-to-vehicle distance button .
  • Page 20 Pictorial index Wireless charger switch ......P. 384 Seat heater switches ......P. 369 Brake hold switch .
  • Page 21 Pictorial index ■ Interior SRS airbags ........P. 32 Floor mats .
  • Page 22 Pictorial index Interior lights/personal lights ..... . P. 370 Moon roof switches ......P. 174 Panoramic moon roof switches .
  • Page 23: 1-1. For Safe Use

    For safety and security 1-1. For safe use Before driving...... 22 For safe driving ....24 Seat belts ......26 SRS airbags......32 Front passenger occupant classification system ..45 Exhaust gas precautions..50 1-2. Child safety Riding with children..... 51 Child restraint systems..
  • Page 24: Before Driving

    1-1. For safe use Before driving Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eyelets. Turn the upper knob of each retaining hook (clip) to secure the floor mats in place.
  • Page 25 When installing the driver’s floor mat ● Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●...
  • Page 26: For Safe Driving

    1-1. For safe use For safe driving For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture Adjust angle seatback so that you are sitting straight up and so that you do not have to lean forward to steer.
  • Page 27: Adjusting The Mirrors

    1-1. For safe use Adjusting the mirrors Make sure that you can see backward clearly by adjusting the inside and outside rear view mirrors properly. (P. 166, 168) WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ●...
  • Page 28: Seat Belts

    1-1. For safe use Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder.
  • Page 29 1-1. For safe use Adjusting the seat belt shoulder anchor height (front seats) Push the seat belt shoulder anchor down while pressing the release button. Push the seat belt shoulder anchor up. Move the height adjuster up and down as needed until you hear a click.
  • Page 30 Toyota dealer free of charge. ■ Rear seat belt Use the seat belt after passing it through the guide if the seat belt comes free from...
  • Page 31 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ●...
  • Page 32 ● Ensure that the belt and plate are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there is no obvious damage.
  • Page 33 1-1. For safe use WARNING ■ Using a seat belt extender ● Do not wear the seat belt extender if you can fasten the seat belt without the extender. ● Do not use the seat belt extender when installing a child restraint system because the belt will not securely hold the child restraint system, increas- ing the risk of death or serious injury in the event of an accident.
  • Page 34: Srs Airbags

    1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. ◆...
  • Page 35 1-1. For safe use ◆ SRS side and curtain shield airbags SRS front side airbags Can help protect the torso of the front seat occupants SRS rear side airbags Can help protect the torso of occupants in the rear outer seats SRS curtain shield airbags ●...
  • Page 36 1-1. For safe use SRS airbag system components Front impact sensors “AIRBAG ON” and “AIRBAG OFF” indicator lights Front passenger occupant classification system (ECU SRS warning light and sensors) Front passenger’s seat belt Knee airbags buckle switch Side impact sensors (front Airbag sensor assembly doors) Side impact sensors (rear)
  • Page 37 1-1. For safe use WARNING ■ SRS airbag precautions Observe the following precautions regarding the SRS airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly.
  • Page 38 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are...
  • Page 39 1-1. For safe use WARNING ■ SRS airbag precautions ● Do not sit on the edge of the seat or lean against the dashboard. ● Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger.
  • Page 40 1-1. For safe use WARNING ■ SRS airbag precautions ● Do not attach anything to or lean any- thing against areas such as the dash- board, steering wheel pad and lower portion of the instrument panel. These items can become projectiles when the SRS driver, front passenger and knee airbags deploy.
  • Page 41 If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer. ● Do not place anything, such as a cushion, on the front passenger's seat.
  • Page 42 Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury.
  • Page 43 1-1. For safe use ■ If the SRS airbags deploy (inflate) ● Slight abrasions, burns, bruising etc., may be sustained from SRS airbags, due to the extremely high speed deployment (inflation) by hot gases. ● A loud noise and white powder will be emitted. ●...
  • Page 44 1-1. For safe use ● Both SRS curtain shield airbags may deploy in the event of a severe side collision. ● Both SRS curtain shield airbags will deploy in the event of vehicle rollover. ● Both SRS curtain shield airbags may also deploy in the event of a severe frontal collision.
  • Page 45 1-1. For safe use ■ Types of collisions that may not deploy the SRS airbags (SRS side and curtain shield airbags) The SRS side and curtain shield airbags may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment.
  • Page 46 1-1. For safe use ■ When to contact your Toyota dealer In the following cases, the vehicle will require inspection and/or repair. Con- tact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ●...
  • Page 47: Front Passenger Occupant Classification System

    1-1. For safe use Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classi- fication system. This system detects the conditions of the front passenger seat and activates or deactivates the front passenger airbag and front passenger knee airbag. U.S.A.
  • Page 48 1-1. For safe use Condition and operation in the front passenger occupant classi- fication system Adult ■ “AIRBAG ON” and “AIRBAG OFF” “AIRBAG ON” indicator lights Indicator/ SRS warning light warning light Driver’s and front passenger’s seat belt reminder light flashing Front passenger airbag Devices...
  • Page 49 1-1. For safe use Unoccupied ■ “AIRBAG ON” and “AIRBAG OFF” “AIRBAG indicator lights OFF” Indicator/ SRS warning light warning light Driver’s and front passenger’s seat belt reminder light Front passenger airbag Devices Deactivated Front passenger knee airbag There is a malfunction in the system ■...
  • Page 50 1-1. For safe use WARNING ■ Front passenger occupant classification system precautions Observe the following precautions regarding the front passenger occupant classification system. Failure to do so may cause death or serious injury. ● Wear the seat belt properly. ● Make sure the front passenger’s seat belt plate has not been left inserted into the buckle before someone sits in the front passenger seat.
  • Page 51 SRS warning light may come on to indicate a malfunction of the front passenger occupant classification system. In this case, contact your Toyota dealer immediately. ● Child restraint systems installed on the rear seat should not contact the front seatbacks.
  • Page 52: Exhaust Gas Precautions

    Keep the trunk lid closed. ● If you smell exhaust gases in the vehicle even when the trunk lid is closed, open the windows and have the vehicle inspected at your Toyota dealer as soon as possible. ■ When parking ●...
  • Page 53: Riding With Children

    1-2. Child safety Riding with children Observe the following precautions when children are in the vehi- cle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt. ● It is recommended that children sit in the rear seats to avoid acci- dental contact with the shift lever, wiper switch etc.
  • Page 54: Child Restraint Systems

    1-2. Child safety Child restraint systems Before installing a child restraint system in the vehicle, there are precautions that need to be observed, different types of child restraint systems, as well as installation methods, etc., written in this manual. Use a child restraint system when riding with a small child that can- not properly use a seat belt.
  • Page 55 ● Toyota strongly urges the use of a proper child restraint system that con- forms to the weight and size of the child, installed on the rear seat. Accord- ing to accident statistics, the child is safer when properly restrained in the rear seat than in the front seat.
  • Page 56 1-2. Child safety Child restraint system Types of child restraint system installation methods ■ Confirm with the operation manual enclosed with the child restraint system about the installation of the child restraint system. Installation method Page Seat belt P. 59 attachment Child restraint...
  • Page 57 1-2. Child safety Installation method Page Type A  Anchor brackets (for tether P. 68 Type B  strap) attach- ment...
  • Page 58 1-2. Child safety When using a child restraint system When installing a child restraint system to a front passenger ■ seat For the safety of a child, install child restraint systems to a rear seats. When installing child restraint system to a front passenger seat is unavoidable, adjust the seat as follows and install the child restraint system.
  • Page 59 1-2. Child safety WARNING ■ When using a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● Never install a rear-facing child restraint system on the front passenger seat even if the “AIRBAG OFF” indicator light is illuminated. In the event of an accident, the force of the rapid inflation of the front passenger airbag can cause death or serious injury to the child if the rear-facing child restraint system is installed on the front passenger seat.
  • Page 60 1-2. Child safety WARNING ■ When using a child restraint system ● When a booster seat is installed, always ensure that the shoulder belt is positioned across the center of the child’s shoulder. The belt should be kept away from the child’s neck, but not so that it could fall off the child’s shoulder.
  • Page 61 1-2. Child safety Child restraint system fixed with a seat belt A child restraint system for a small child or baby must itself be prop- erly restrained on the seat with the lap portion of the lap/shoulder belt. ◆ Installing child restraint system using a seat belt (child restraint lock function belt) Install the child restraint system in accordance to the operation manual enclosed with the child restraint system.
  • Page 62 1-2. Child safety While pushing child restraint system down into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
  • Page 63 1-2. Child safety Run the seat belt through the child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted. Fully extend the shoulder belt and allow it to retract to put it in lock mode.
  • Page 64 1-2. Child safety Booster seat ■ If installing the child restraint system to the front passenger seat is unavoidable, refer to P. 56 for the front passenger seat adjust- ment. High back type: If the head restraint interferes with your child restraint system, and the head restraint can be removed, remove the head...
  • Page 65 1-2. Child safety ◆ Removing a child restraint system installed with a seat belt Press the buckle release button and fully retract the seat belt. When releasing the buckle, the child restraint system spring up due to the rebound of the seat cushion.
  • Page 66 1-2. Child safety WARNING ■ When installing a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious inju- ries that could result in death.
  • Page 67 1-2. Child safety Child restraint system fixed with a child restraint LATCH anchor Child restraint LATCH anchors ■ LATCH anchors are provided for the outboard rear seats. (Marks displaying the location of the anchors are attached to the seats.) When installing in the rear outboard seats ■...
  • Page 68 1-2. Child safety With flexible lower attachments  Latch the hooks of the lower straps onto LATCH anchors. For owners in Canada: symbol child restraint system indicates the presence of a lower connec- tor system. Canada only With rigid lower attachments ...
  • Page 69 1-2. Child safety After installing the child restraint system, rock it back and forth to ensure that it is installed securely. (P. 64) When installing in the rear center seat ■ There are no LATCH anchors behind the rear center seat. How- ever, the inboard LATCH anchors of the outboard seats, which are 16.1 in.
  • Page 70 1-2. Child safety Using an anchor bracket (for top tether strap) Anchor brackets (for top tether strap) ■ Anchor brackets are provided for each rear seat. Use anchor brackets when fixing the top tether strap. Type A Type B  ...
  • Page 71 1-2. Child safety Open the anchor bracket cover, latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched. (P. 64) When installing the child restraint system with the head restraint being raised, be sure to have the top tether strap pass underneath the head restraint.
  • Page 72 1-2. Child safety WARNING ■ When installing a child restraint system Observe the following precautions. Failure to do so may result in death or serious injury. ● Firmly attach the top tether strap and make sure that the belt is not twisted. ●...
  • Page 73: Engine Immobilizer System

    1-3. Theft deterrent system Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously regis- tered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehi- cle.
  • Page 74 1-3. Theft deterrent system ■ Certifications for the engine immobilizer system For vehicles sold in the U.S.A.  For vehicles sold in Canada ...
  • Page 75 1-3. Theft deterrent system NOTICE ■ To ensure the system operates correctly Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.
  • Page 76: Alarm

    1-3. Theft deterrent system  Alarm The alarm The alarm uses light and sound to give an alert when an intrusion is detected. The alarm is triggered in the following situations when the alarm is set: Vehicles without a smart key system ...
  • Page 77 1-3. Theft deterrent system Deactivating or stopping the alarm Do one of the following to deactivate or stop the alarm: Vehicles without a smart key system  ● Unlock the doors. ● Open the trunk using the wireless remote control. ●...
  • Page 78 1-3. Theft deterrent system ■ Triggering of the alarm The alarm may be triggered in the following situations: (Stopping the alarm deactivates the alarm system.) ● Vehicles without a smart key system: The trunk is opened using the key. ● Vehicles with a smart key system: The trunk is opened using the mechanical key.
  • Page 79: 2. Instrument Cluster

    Instrument cluster Instrument cluster Warning lights and indicators ......78 Gauges and meters .... 84 Multi-information display (4.2-inch display) ....87 Multi-information display (7-inch display) ....99 Head-up display ....113 Fuel consumption information ...... 120...
  • Page 80: Warning Lights And Indicators

    2. Instrument cluster Warning lights and indicators The warning lights and indicators on the instrument cluster, cen- ter panel and outside rear view mirrors inform the driver of the status of the vehicle’s various systems. For the purpose of explanation, the following illustrations dis- play all warning lights and indicators illuminated.
  • Page 81: Warning Lights

    2. Instrument cluster Warning lights Warning lights inform the driver of malfunctions in the indicated vehi- cle’s systems. Brake system warning Parking brake indicator light (P. 497) (P. 498) (U.S.A.) (Canada) 1, 2 Brake system warning Brake hold operated light (P. 497) indicator (P.
  • Page 82 They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or turn off. Have the vehicle inspected by your Toyota dealer. : This light flashes to indicate a malfunction.
  • Page 83 2. Instrument cluster Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator Brake hold standby (P. 211) indicator (P. 217) Headlight indicator Cruise control indicator (P. 219) (P. 263, 276, 289) (U.S.A.) Tail light indicator Radar cruise control...
  • Page 84 2. Instrument cluster 1, 7 1, 4 “AIRBAG ON/OFF” Slip indicator (P. 295) indicator (P. 45) (Type A for Canada) 1, 7 1, 3 VSC OFF indicator “AIRBAG ON/OFF” (P. 296) indicator (P. 45) (Type B for Canada) “BSM” indicator Security indicator (P.
  • Page 85 Have the vehicle inspected by your Toyota dealer immedi- ately if this occurs.
  • Page 86: Gauges And Meters

    2. Instrument cluster Gauges and meters 4.2-inch display  7-inch display ...
  • Page 87 2. Instrument cluster Tachometer Displays the engine speed in revolutions per minute Shift position (P. 205) Outside temperature Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C). Low outside temperature indicator comes on when the ambient temperature is 37°F (3°C) or lower. Multi-information display Presents the driver with a variety of vehicle data (P.
  • Page 88 When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.) ● When “” or “E” is displayed, the system may be malfunctioning. Take your vehicle to your Toyota dealer. NOTICE ■ To prevent damage to the engine and its components ●...
  • Page 89 2. Instrument cluster Multi-information display (4.2-inch display) Summary of functions The multi-information display presents the driver with a variety of driv- ing-related data, such as the current outside temperature. The multi- information display can also be used to change the display settings and other settings.
  • Page 90 2. Instrument cluster Using the multi-information display ◆ Using the content display area The content display area is operated using the meter control switches. Scroll screens , change the displayed content and move the cursor Press: Enter/Set Press and hold: Reset Return previous screen...
  • Page 91 2. Instrument cluster Menu icons Select a menu icon to display its content. Drive information (P. 90) Select to display various drive data. Audio system-linked display Select to enable selection of an audio source or track on the meter using the meter control switches. Driving assist system information Select to display the operational status of the following systems: •...
  • Page 92 2. Instrument cluster Drive information ( Trip (after start) ■ Average fuel economy Displays the average fuel con- sumption since engine start. Average vehicle speed Displays the average vehicle speed since engine start. Elapsed time Displays the time elapsed since engine start.
  • Page 93 2. Instrument cluster Tank (after refuel) ■ 1, 2 Driving range Displays the driving range with remaining fuel. 1, 3 Average fuel economy Displays the average fuel con- sumption since the vehicle was refueled. : When only a small amount of fuel is added to the tank, the display may not be updated.
  • Page 94 2. Instrument cluster Settings display ( ◆ Changing settings Use the meter control switches on the steering wheel to change settings. Press to select Operate the switches to select a desired item. Change the setting by referring to the message displayed on the screen.
  • Page 95 2. Instrument cluster PCS (Pre-Collision System) (if equipped) (P. 242) ■ The following pre-collision system settings can be changed: Item Settings Details Select to enable/disable the pre- collision system. Select to change the warning Warning sensitivity timing. BSM (Blind Spot Monitor) function (if equipped) (P. 300) ■...
  • Page 96 ID codes must be (vehicles without a tire inflation pres- registered by a Toyota dealer. sure display function) For information regarding chang- ing the registered ID code set, contact your Toyota dealer.
  • Page 97 2. Instrument cluster Item Settings Details Scheduled maintenance display (if equipped) Select to reset the message indi- cating maintenance is required, Maintenance data reset after the required maintenance is performed. (P. 421) Meter settings ■ Item Settings Details Select to change the language Language displayed.
  • Page 98 2. Instrument cluster Odometer/trip meter Odometer ■ Displays the total distance the vehicle has been driven. Trip meter A/trip meter B ■ Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and dis- play different distances independently.
  • Page 99 2. Instrument cluster ■ Eco Driving Indicator Eco Driving Indicator Light During Eco-friendly acceleration (Eco driving), the Eco Driving Indicator Light will turn on. When the acceleration exceeds the Zone of Eco driving, or when the vehicle is stopped, the light turns off.
  • Page 100 2. Instrument cluster WARNING ■ Caution for use while driving ● When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle. ● Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc.
  • Page 101 2. Instrument cluster Multi-information display (7-inch display) Summary of functions The multi-information display presents the driver with a variety of driv- ing-related data, such as the current outside temperature. The multi- information display can also be used to change the display settings and other settings.
  • Page 102 2. Instrument cluster Odometer/trip meter (P. 110) Shift position (P. 205) Outside temperature (P. 84) Menu icons (P. 101) “ODO/TRIP” switch (P. 100) Meter control switches (P. 100) Using the multi-information display ◆ Using the content display area The content display area is operated using the meter control switches.
  • Page 103 2. Instrument cluster Menu icons Select a menu icon to display its content. Warning message display (P. 507) This menu icon will be displayed only when a warning message can be displayed. Select to display warning messages and measures to be taken if a mal- function is detected.
  • Page 104: Fuel Consumption

    2. Instrument cluster Eco-friendly driving information ( Fuel consumption ■ Current fuel consumption Displays the instantaneous cur- rent fuel consumption. Average fuel economy (after start) Displays the average fuel con- sumption since engine start. Driving range 2, 3 Displays the driving range with remaining fuel. Gadget The following items can be displayed by changing the settings for gad- get content and fuel economy type on...
  • Page 105: Eco Indicator

    2. Instrument cluster Average fuel economy Displayed item (listed below) can be changed on the fuel economy type screen of . (P. 104) ● Total (after reset) 1, 5 Displays the average fuel consumption since the display was reset. ● Tank (after refuel) Displays the average fuel consumption since the vehicle was 1, 2 refueled.
  • Page 106 2. Instrument cluster Settings display ( ◆ Changing settings Use the meter control switches on the steering wheel to change settings. Press to select Operate the switches to select a desired item. Press or press and hold The available settings will differ depending on if is pressed or pressed and held.
  • Page 107 2. Instrument cluster PCS (Pre-Collision System) (P. 242) ■ Press and hold to change the settings of the following items: Item Settings Details Select to enable/disable the pre- collision system. Select to change the warning Warning sensitivity timing. BSM (Blind Spot Monitor) (if equipped) (P. 300) ■...
  • Page 108 2. Instrument cluster RCTA (Rear Cross Traffic Alert) (if equipped) (P. 300) ■ Press to enable/disable the Rear Cross Traffic Alert function. Item Settings Details Select to enable/disable the Rear RCTA Cross Traffic Alert function. Press and hold to change the settings of the following item: Item Settings Details...
  • Page 109 2. Instrument cluster HUD (Head-up display) (if equipped) (P. 113) ■ Press to enable/disable the head-up display. Item Settings Details Select enable/disable head-up display. Press and hold to change the settings of the following items: Item Settings Details Select to adjust the brightness/ position of the head-up display.
  • Page 110 2. Instrument cluster Vehicle settings ■ Press and hold to change the settings of the following items: Item Settings Details TPWS (Tire pressure warning system) (P. 445) Select to initialize the tire pres- sure warning system. To per- form initialization, press and hold Set pressure (tire pressure warning sys- switch.
  • Page 111: Meter Settings

    2. Instrument cluster Meter settings ■ Press and hold to change the settings of the following items: Item Settings Details Select to change the language Language displayed. Select to change the units of Units measure displayed. Select to enable/disable the Eco (Eco Driving Driving Indicator Light.
  • Page 112 2. Instrument cluster Odometer/trip meter Odometer ■ Displays the total distance the vehicle has been driven. Trip meter A/trip meter B ■ Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and dis- play different distances independently.
  • Page 113 2. Instrument cluster ■ Eco Driving Indicator Eco Driving Indicator Light During Eco-friendly acceleration (Eco driving), the Eco Driving Indicator Light will turn on. When the acceleration exceeds the Zone of Eco driving, or when the vehicle is stopped, the light turns off.
  • Page 114 2. Instrument cluster WARNING ■ Caution for use while driving ● When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle. ● Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc.
  • Page 115: Head-Up Display

    2. Instrument cluster  Head-up display Summary of functions The head-up display is linked to the meters and navigation system (if equipped) and projects a variety of information in front of the driver, such as the current vehicle speed. Driving assist system status/navigation system-linked display area (if equipped) (P.
  • Page 116 2. Instrument cluster Using the head-up display Select on the multi-information display (P. 104) and then ◆ Enabling/disabling the head-up display Press to enable/disable the head-up display. ◆ Changing the head-up display settings Press and hold to change the following settings: Eco Driving Indicator/Tachometer ■...
  • Page 117 2. Instrument cluster Driving assist system status/navigation system-linked display area (if equipped) ◆ Driving assist system status display Displays the operational status of the following systems: • Dynamic radar cruise control with full-speed range (P. 263) • LDA (Lane Departure Alert with steering control) (P. 253) •...
  • Page 118 2. Instrument cluster Eco Driving Indicator/Tachometer Eco Driving Indicator ■ Eco Driving Indicator Zone Display Eco driving ratio based on acceleration Zone of Eco driving Displayed content is the same as that displayed on the multi- information display (Eco Driving Indicator).
  • Page 119 2. Instrument cluster Information display area Displays the following items in the appropriate situation: Warning/Message ■ ● Alert from the LDA (Lane Departure Alert with steering control) ● Dynamic radar cruise control with full-speed range ● message Displayed when a suggestion/advice pop-up display is displayed on the multi-information display.
  • Page 120 2. Instrument cluster ■ Head-up display The head-up display may seem dark or hard to see when viewed through sunglasses, especially polarized sunglasses. Adjust the brightness of the head-up display or remove your sunglasses. ■ Display brightness The brightness of the head-up display can be adjusted on of the multi- information display.
  • Page 121 2. Instrument cluster NOTICE ■ To prevent damage to components ● Do not place any drinks near the head- up display projector. If the projector gets wet, electrical malfunctions may result. ● Do not place anything on or put stickers onto the head-up display projector.
  • Page 122: Fuel Consumption Information

    2. Instrument cluster Fuel consumption information Fuel consumption information can be displayed on the audio system screen. Trip information Entune Audio or Entune Audio Plus (vehicles without Data Commu-  nication Module) Press the “INFO” button. If the “History” screen is displayed, select “Trip Information”.
  • Page 123 2. Instrument cluster Entune Premium Audio  Press the “MENU” button. Select “Info” on the “Menu” screen. Select “ECO” on the “Informa- tion” screen. If the “History” screen is displayed, select “Trip Information”. Resetting the consumption data Average vehicle speed since the engine was started Elapsed time since the engine was started...
  • Page 124 2. Instrument cluster History Entune Audio or Entune Audio Plus (vehicles without Data Commu-  nication Module) Press the “INFO” button. If the “Trip Information” screen is displayed, select “History”. Entune Audio Plus (vehicles with Data Communication Module)  Press the “INFO” button. Select “ECO”...
  • Page 125 2. Instrument cluster ■ Updating the past record data Update the average fuel consumption by selecting “Clip” to measure the cur- rent fuel consumption again. ■ Resetting the data The fuel consumption data can be deleted by selecting “Clear”. ■ Cruising range Displays the estimated maximum distance that can be driven with the quan- tity of fuel remaining.
  • Page 126 2. Instrument cluster...
  • Page 127 Operation of each component 3-1. Key information Keys ........126 3-2. Opening, closing and locking the doors Doors ........ 135 Trunk......... 144 Smart key system ..... 149 3-3. Adjusting the seats Front seats ......158 Rear seats......160 Head restraints....162 3-4.
  • Page 128: Keys

    3-1. Key information Keys The keys The following keys are provided with the vehicle. Vehicles without a smart key system  Keys Operating the wireless remote con- trol function (P. 127) Key number plate Vehicles with a smart key system ...
  • Page 129 (P. 136) Opens the trunk (P. 145) Sounds the alarm (P. 129) : If equipped : This setting must be customized at your Toyota dealer. Vehicles with a smart key system  Locks all the doors (P. 136) Unlocks all the doors (P. 136) Pressing the button unlocks the driver’s door.
  • Page 130 3-1. Key information Using the key (vehicles without a smart key system) Releasing To release the key, press the but- ton. Folding To stow the key, press the button then fold the key. Using the mechanical key (vehicles with a smart key system) To take out the mechanical key, slide the release lever and take the key out.
  • Page 131 3-1. Key information ■ Panic mode Vehicles without a smart key system  When is pressed for longer than about one second, an alarm will sound intermittently and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle.
  • Page 132 ■ If you lose your keys New genuine keys can be made by your Toyota dealer using the other key (vehicles without a smart key system) or the other mechanical key (vehicles with a smart key system) and the key number stamped on your key number plate.
  • Page 133 ■ Confirmation of the registered key number The number of keys already registered to the vehicle can be confirmed. Ask your Toyota dealer for details. ■ If a wrong key is used The key cylinder rotates freely to isolate inside mechanism.
  • Page 134 3-1. Key information ■ Certification for the wireless remote control (vehicles without a smart key system) For vehicles sold in the U.S.A. ...
  • Page 135 3-1. Key information For vehicles sold in Canada ...
  • Page 136 When an electronic key is lost (vehicles with a smart key system) If the electronic key remains lost, the risk of vehicle theft increases signifi- cantly. Visit your Toyota dealer immediately with all remaining electronic keys that were provided with your vehicle.
  • Page 137: Doors

    3-2. Opening, closing and locking the doors Doors Unlocking and locking the doors from the outside ◆ Smart key system (if equipped) Carry the electronic key to enable this function. Grip the driver’s door handle to unlock the door. Holding the driver’s door handle for approximately seconds...
  • Page 138: Wireless Remote Control

    3 seconds unlocks the other doors. 1, 2 Press and hold to open the windows and the moon roof or pan- 1, 2 oramic moon roof. (P. 171, 175, 179) : If equipped : This setting must be customized at your Toyota dealer.
  • Page 139 Turn and hold to open the windows and moon roof. (P. 171, 175) : If equipped : This setting must be customized at your Toyota dealer. Vehicles with a smart key system  The doors can also be locked and unlocked with the mechanical...
  • Page 140 3-2. Opening, closing and locking the doors ■ Operation signals Doors: A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) Windows and moon roof or panoramic moon roof: A buzzer sounds to indicate that the windows and moon roof or panoramic moon roof are operating.
  • Page 141 3-2. Opening, closing and locking the doors Unlocking and locking the doors from the inside ◆ Door lock switches Locks all the doors Unlocks all the doors ◆ Inside lock buttons Locks the door Unlocks the door The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position.
  • Page 142 3-2. Opening, closing and locking the doors Rear door child-protector lock The door cannot be opened from inside the vehicle when the lock is set. Unlock Lock These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.
  • Page 143 3-2. Opening, closing and locking the doors ■ Switching the door unlock function (vehicles with a smart key system) It is possible to set which doors the entry function unlocks using the wireless remote control. Turn the engine switch off. When the indicator light on the key surface is not on, press and hold for approximately 5 seconds while pressing and holding The setting changes each time an operation is performed, as shown below.
  • Page 144 3-2. Opening, closing and locking the doors ■ Impact detection door lock release system In the event that the vehicle is subject to a strong impact, all the doors are unlocked. Depending on the force of the impact or the type of accident, how- ever, the system may not operate.
  • Page 145 3-2. Opening, closing and locking the doors WARNING ■ To prevent an accident Observe the following precautions while driving the vehicle. Failure to do so may result in a door opening and an occupant falling out, resulting in death or serious injury. ●...
  • Page 146: Trunk

    3-2. Opening, closing and locking the doors Trunk The trunk can be opened using the trunk opener switch, entry function (vehicles with a smart key system), wireless remote control or key. Opening the trunk from inside the vehicle Press the trunk opener switch. Opening the trunk from outside the vehicle ◆...
  • Page 147 3-2. Opening, closing and locking the doors ◆ Wireless remote control Vehicles without a smart key Vehicles with a smart key sys-   system Press and hold the switch. A buzzer sounds. ◆ Vehicles without a smart key system ...
  • Page 148 3-2. Opening, closing and locking the doors ■ Trunk light The trunk light turns on when the trunk is opened. ■ Function to prevent the trunk being locked with the electronic key inside (vehicles with a smart key system) ● When all doors are locked, closing the trunk lid with the electronic key left inside the trunk will sound an alarm.
  • Page 149 3-2. Opening, closing and locking the doors WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ Before driving ● Make sure that the trunk lid is fully closed. If the trunk lid is not fully closed, it may open unexpectedly while driving and hit near-by objects or luggage in the trunk may be thrown out, causing an accident.
  • Page 150 ● Do not attach any accessories other than genuine Toyota parts to the trunk lid. Such additional weight on the trunk lid may cause the lid to suddenly shut again after it is opened.
  • Page 151: Smart Key System

    3-2. Opening, closing and locking the doors  Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) ● Locks and unlocks the doors (P. 135) ●...
  • Page 152 3-2. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of either of the front out- side door handles.
  • Page 153 3-2. Opening, closing and locking the doors ■ Battery-saving function The battery-saving function will be activated in order to prevent the electronic key battery and the vehicle battery from being discharged while the vehicle is not in operation for a long time. ●...
  • Page 154 3-2. Opening, closing and locking the doors ● When other wireless keys (that emit radio waves) are being used nearby ● When carrying the electronic key together with the following devices that emit radio waves • Portable radio, cellular phone, cordless phone or other wireless commu- nication devices •...
  • Page 155 ● Fingernails may scrape against the door during operation of the door han- dle. Be careful not to injure fingernails or damage the surface of the door. : This setting can be customized at your Toyota dealer.
  • Page 156 3-2. Opening, closing and locking the doors ■ When the vehicle is not driven for extended periods ● To prevent theft of the vehicle, do not leave the electronic key within 6 ft. (2 m) of the vehicle. ● The smart key system can be deactivated in advance. (P. 567) ●...
  • Page 157 3-2. Opening, closing and locking the doors ■ Certification for the smart key system For vehicles sold in the U.S.A. ...
  • Page 158 3-2. Opening, closing and locking the doors For vehicles sold in Canada ...
  • Page 159 (P. 149) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of the emitted radio waves.
  • Page 160: Adjusting The Seats Front Seats

    3-3. Adjusting the seats Front seats Adjustment procedure Manual seat  Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever Power seat  Seat position adjustment switch Seatback angle adjustment switch Seat cushion (front) angle adjustment switch Vertical height adjustment...
  • Page 161 3-3. Adjusting the seats WARNING ■ When adjusting the seat position ● Take care when adjusting the seat position to ensure that other passen- gers are not injured by the moving seat. ● Do not put your hands under the seat or near the moving parts to avoid injury.
  • Page 162: Rear Seats

    3-3. Adjusting the seats  Rear seats (folding type) The seatbacks of the rear seats can be folded down. Folding down the rear seatbacks Pull the seatback lever in the trunk for the seatback you wish to fold down and then fold the seatback down.
  • Page 163 3-3. Adjusting the seats WARNING ■ When folding the seatbacks down Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not fold the seatbacks down while driving. ● Stop the vehicle on level ground, set the parking brake and shift the shift lever to P.
  • Page 164: Head Restraints

    3-3. Adjusting the seats Head restraints Head restraints are provided for all seats. Adjustable type  Pull the head restraint up. Down Push the head restraint down while pressing the lock release button. Lock release button Integrated type  Head restraints cannot be adjusted or removed. ■...
  • Page 165 3-3. Adjusting the seats ■ Installing the head restraints Front seats  Align the head restraint with the installa- tion holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint. Lock release button Rear seats...
  • Page 166: Wheel And Mirrors Steering Wheel

    3-4. Adjusting the steering wheel and mirrors Steering wheel Adjustment procedure Hold the steering wheel and push the lever down. Adjust to the ideal position by moving the steering wheel hori- zontally and vertically. After adjustment, pull the lever up to secure the steering wheel.
  • Page 167 3-4. Adjusting the steering wheel and mirrors WARNING ■ Caution while driving Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and cause an acci- dent, resulting in death or serious injury. ■...
  • Page 168: Inside Rear View Mirror

    3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s position can be adjusted to enable suffi- cient confirmation of the rear view. Adjusting the height of rear view mirror The height of the rear view mirror can be adjusted to suit your driving posture.
  • Page 169 3-4. Adjusting the steering wheel and mirrors Auto anti-glare inside rear view mirror  Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced. Changing automatic anti-glare function mode On/off When the automatic anti-glare function is in ON mode, the indica- tor illuminates.
  • Page 170: Outside Rear View Mirrors

    3-4. Adjusting the steering wheel and mirrors Outside rear view mirrors Adjustment procedure To select a mirror to adjust, turn the switch. Left Right To adjust the mirror, operate the switch. Right Down Left Folding the mirrors Push the mirror back in the direc- tion of the vehicle’s rear.
  • Page 171 3-4. Adjusting the steering wheel and mirrors ■ Mirror angle can be adjusted when Vehicles without a smart key system  The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system  The engine switch is in ACCESSORY or IGNITION ON mode. ■...
  • Page 172: The Windows Power Windows

    3-5. Opening and closing the windows Power windows Opening and closing procedures The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Closing One-touch closing Opening One-touch opening : To stop the window partway, oper- ate the switch in the opposite direc- tion.
  • Page 173 3-5. Opening and closing the windows ■ Operating the power windows after turning the engine off Vehicles without a smart key system  The power windows can be operated for approximately 45 seconds even after the engine switch is turned to the “ACC” or “LOCK” position. They can- not, however, be operated once either front door is opened.
  • Page 174 The power windows can be opened using the wireless remote control.  P. 136) : These settings must be customized at your Toyota dealer. ■ Alarm (if equipped) The alarm may be triggered if the alarm is set and a power window is closed using the door lock linked power window operation function.
  • Page 175 3-5. Opening and closing the windows WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ Closing the windows ● The driver is responsible for all the power window operations, including the operation for the passengers. In order to prevent accidental operation, especially by a child, do not let a child operate the power windows.
  • Page 176: Moon Roof

    3-5. Opening and closing the windows  Moon roof Use the overhead switches to open and close the moon roof and tilt it up and down. Opening and closing Opens the moon roof The moon roof stops slightly before the fully open position to reduce wind noise.
  • Page 177 Vehicles with a smart key system: The moon roof can be opened and closed using the mechanical key. (P. 526) ● The moon roof can be opened using the wireless remote control. (P. 136) : These settings must be customized at your Toyota dealer.
  • Page 178 If the moon roof does not fully close even after performing the above proce- dure correctly, have the vehicle inspected by your Toyota dealer. ■ Alarm The alarm may be triggered if the alarm is set and the moon roof is closed using the door lock linked moon roof operation function.
  • Page 179 3-5. Opening and closing the windows WARNING Observe the following precautions. Failure to do so may cause death or serious injury. ■ Opening the moon roof ● Do not allow any passengers to put their hands or heads outside the vehi- cle while it is moving.
  • Page 180: Panoramic Moon Roof

    3-5. Opening and closing the windows  Panoramic moon roof Use the overhead switches to operate the panoramic moon roof and electronic sunshade. Opening and closing the electronic sunshade Opens the electronic sunshade Slide and hold the switch backward. The electronic sun- shade will fully open automati- cally.
  • Page 181 The panoramic moon roof can be opened and closed using the mechanical key. (P. 526) ● The panoramic moon roof can be opened using the wireless remote con- trol. (P. 136) : These settings must be customized at your Toyota dealer.
  • Page 182 If the panoramic moon roof or electronic sunshade does not fully close even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer. ■ Alarm The alarm may be triggered if the alarm is set and the panoramic moon roof is closed using the door lock linked panoramic moon roof operation function.
  • Page 183 3-5. Opening and closing the windows WARNING Observe the following precautions. Failing to do so may cause death or serious injury. ■ Opening and closing the electronic sunshade ● Check to make sure that all passengers do not have any part of their body in a position where it could be caught when the electronic sunshade is being oper- ated.
  • Page 184 3-5. Opening and closing the windows WARNING ■ Jam protection function ● Never use any part of your body to intentionally activate the jam protection function. ● The jam protection function may not work if something gets caught just before the panoramic moon roof or electronic sunshade is fully closed. Also, the jam protection function is not designed to operate while the switch is being pressed.
  • Page 185: 4 Driving

    ........231 Cargo and luggage ... 192 4-5. Using the driving Vehicle load limits ..... 195 support systems Trailer towing..... 196 Toyota Safety Sense P ..235 Dinghy towing ....197 PCS (Pre-Collision 4-2. Driving procedures System)......242 Engine (ignition) switch...
  • Page 186: Driving The Vehicle

    4-1. Before driving Driving the vehicle The following procedures should be observed to ensure safe driving: Starting the engine P. 198, 200 Driving With the brake pedal depressed, shift the shift lever to D. (P. 205) Release the parking brake. (P. 212, 214) Gradually release the brake pedal and gently depress the accelera- tor pedal to accelerate the vehicle.
  • Page 187 295) to cancel Drive-Start Control so that the vehicle may become able to escape from the mud or fresh snow. ■ Breaking in your new Toyota To extend the life of the vehicle, observing the following precautions is recom- mended: ●For the first 186 miles (300 km):...
  • Page 188 Your vehicle has a drum-in-disc type parking brake system. This type of brake system needs bedding-down of the brake shoes periodically or whenever the parking brake shoes and/or drum are replaced. Have your Toyota dealer per- form the bedding down operation.
  • Page 189 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When starting the vehicle Always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping. ■...
  • Page 190 If you hear a squealing or scraping noise (brake pad wear limit indica- tors) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage may result if the pads are not replaced when needed.
  • Page 191 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When the vehicle is stopped ● Do not race the engine. If the shift lever is any position other than P or N, the vehicle may acceler- ate suddenly and unexpectedly, causing an accident.
  • Page 192 4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When the vehicle is parked ● Always apply the parking brake, shift the shift lever to P, stop the engine and lock the vehicle.
  • Page 193 Short in electrical components ● Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following: ● Brake function ●...
  • Page 194: Cargo And Luggage

    Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. (P. 195) Toyota does not recommend towing a trailer with your vehicle. Your vehicle is not designed for trailer towing.
  • Page 195 4-1. Before driving Calculation formula for your vehicle Cargo capacity Total load capacity (vehicle capacity weight) (P. 540) When 2 people with the combined weight of A lb. (kg) are riding in your vehicle, which has a total load capacity (vehicle capacity weight) of B lb.
  • Page 196 4-1. Before driving WARNING ■ Things that must not be carried in the trunk The following things may cause a fire if loaded in the trunk: ● Receptacles containing gasoline ● Aerosol cans ■ Storage precautions Observe the following precautions. Failure to do so may prevent the pedals from being depressed properly, may block the driver’s vision, or may result in items hitting the driver or passengers, possibly causing an accident.
  • Page 197: Vehicle Load Limits

    Seating capacity means the maximum number of occupants whose estimated average weight is 150 lb. (68 kg) per person. ◆ Towing capacity Toyota does not recommend towing a trailer with your vehicle. ◆ Cargo capacity Cargo capacity may increase or decrease depending on the weight and the number of occupants.
  • Page 198: Trailer Towing

    Trailer towing Toyota does not recommend towing a trailer with your vehicle. Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicy- cle, etc. Your vehicle is not designed for trailer towing or for the...
  • Page 199: Dinghy Towing

    4-1. Before driving Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with four wheels on the ground.
  • Page 200: Engine (Ignition) Switch

    4-2. Driving procedures Engine (ignition) switch (vehicles without a smart key system) Starting the engine Check that the parking brake is set. Check that the shift lever is in P. Firmly depress the brake pedal. Turn the engine switch to the “START” position and start the engine.
  • Page 201 Do not crank the engine for more than 30 seconds at a time. This may overheat the starter and wiring system. ● Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately.
  • Page 202 4-2. Driving procedures Engine (ignition) switch (vehicles with a smart key system) Performing the following operations when carrying the elec- tronic key on your person starts the engine or changes engine switch modes. Starting the engine Check that the parking brake is set. Check that the shift lever is in P.
  • Page 203 4-2. Driving procedures Changing engine switch modes Modes can be changed by pressing the engine switch with the brake pedal released. (The mode changes each time the switch is pressed.) The emergency flashers can be used. The multi-information display will not be displayed.
  • Page 204 If the engine does not start ● The engine immobilizer system may not have been deactivated. (P. 71) Contact your Toyota dealer. ● Check that the shift lever is securely set in P. The engine may not start if the shift lever is displaced out of P.
  • Page 205 4-2. Driving procedures ■ If the electronic key battery is depleted P. 466 ■ Operation of the engine switch ● If the switch is not pressed shortly and firmly, the engine switch mode may not change or the engine may not start. ●...
  • Page 206 Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately. ■ Symptoms indicating a malfunction with the engine switch If the engine switch seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction.
  • Page 207: Automatic Transmission

    4-2. Driving procedures Automatic transmission Shifting the shift lever Vehicles without a smart key system: While the engine switch is in the “ON” position and the brake pedal depressed , shift the shift lever while pushing the shift release button on the shift knob. Vehicles with a smart key system: While the engine switch is in IGNITION ON mode and the brake pedal depressed...
  • Page 208 4-2. Driving procedures Shift position purpose Shift position Objective or function Parking the vehicle/starting the engine Reversing Neutral Normal driving S mode driving (P. 206) : Shifting to the D position allows the system to select a gear suitable for the driving conditions.
  • Page 209 4-2. Driving procedures Shift ranges and their functions ■ Meter display Function A gear in the range between 1 and the selected S2 - S8 gear is automatically chosen depending on vehicle speed and driving conditions Setting the gear at 1 A lower shift range will provide greater engine braking forces than a higher shift range.
  • Page 210 4-2. Driving procedures ■ Automatic deactivation of shift range selection in the D position Shift range selection in the D position will be deactivated in the following situ- ations: ● The “+” paddle shift switch is held down for a period of time ●...
  • Page 211 S This may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by your Toyota dealer immediately. (In this situation, the transmission will operate in the same manner as when the shift lever is in D.) ■...
  • Page 212 4-2. Driving procedures WARNING ■ When driving on slippery road surfaces Do not accelerate or shift gears suddenly. Sudden changes in engine braking may cause the vehicle to spin or skid, resulting in an accident. ■ To prevent an accident when releasing the shift lock Before pressing the shift lock override button, make sure to set the parking brake and depress the brake pedal.
  • Page 213: Turn Signal Lever

    4-2. Driving procedures Turn signal lever Operating instructions Right turn Lane change to the right (move the lever partway and release The right hand signals will flash 3 times. Lane change to the left (move the lever partway and release The left hand signals will flash 3 times.
  • Page 214: Parking Brake

    4-2. Driving procedures  Parking brake Operating instructions To set the parking brake, fully depress the parking brake pedal with your left foot while depress- ing the brake pedal with your right foot. (Depressing pedal again releases the parking brake.) : For U.S.A.
  • Page 215: Electric Parking Brake

    4-2. Driving procedures  Electric parking brake A mode can be selected from the following modes. Automatic mode The parking brake is set or released automatically according to the shift lever operation. Even when in automatic mode, the parking brake can be set and released manually.
  • Page 216 4-2. Driving procedures Manual mode The parking brake can be set and released manually. Sets the parking brake The parking brake indicator light and parking brake light will turn on. Pull and hold the parking brake switch if an emergency occurs and it is necessary to operate the park- ing brake while driving.
  • Page 217 Operate the parking brake switch. If the message does not disappear after operating the switch several times, the system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. ■ Parking brake operation sound When the parking brake operates, a motor sound (whirring sound) may be heard.
  • Page 218 When the parking brake cannot be released due to a malfunction Driving the vehicle with the parking brake set will lead to brake components overheating, which may affect braking performance and increase brake wear. Contact your Toyota dealer immediately if this occurs.
  • Page 219: Brake Hold

    4-2. Driving procedures  Brake Hold The brake hold system keeps the brake applied when the shift lever is in D, S or N with the system on and the brake pedal has been depressed to stop the vehicle. The system releases the brake when the accelerator pedal is depressed with the shift lever in D or S to allow smooth start off.
  • Page 220 Make sure that the parking brake indicator light goes off. (P. 213) ■ When an inspection at your Toyota dealer is necessary When the brake hold standby indicator (green) does not illuminate even when the brake hold switch is pressed with the brake hold system operating condi- tions met, the system may be malfunctioning.
  • Page 221: Headlight Switch

    4-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Operating instructions Turning the end of the lever turns on the lights as follows: The headlights, day- time running lights (P. 220) and all the lights listed below turn on and off automatically.
  • Page 222 4-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever away from you to turn on the high beams. Pull the lever toward you to the center position to turn the high beams off.
  • Page 223 4-3. Operating the lights and wipers ■ Automatic light off system Vehicles without a smart key system  ● When the headlights are on: The headlights and tail lights turn off 30 sec- onds after the engine switch is turned to the “ACC” or “LOCK” position and a door is opened and closed.
  • Page 224 4-3. Operating the lights and wipers ■ Windshield wiper linked headlight illumination When driving during daytime with the headlight switch turned to , if the windshield wipers are used, the headlights will turn on automatically after several seconds to help enhance the visibility of your vehicle. ■...
  • Page 225: Automatic High Beam

    4-3. Operating the lights and wipers  Automatic High Beam The Automatic High Beam uses a camera sensor located behind the upper portion of the windshield to assess the brightness of the lights of vehicles ahead, streetlights, etc., and automatically turns the high beams on or off as necessary.
  • Page 226 4-3. Operating the lights and wipers Turning the high beams on/off manually Switching to the low beams ■ Pull the lever to its original posi- tion. The Automatic High Beam indi- cator will turn off. Push the lever away from you to activate the Automatic High...
  • Page 227 4-3. Operating the lights and wipers ■ Conditions to turn the high beams on/off automatically ● When all of the following conditions are met, the high beams will be turned on automatically (after approximately 1 second): • The vehicle speed is approximately 21 mph (34 km/h) or more. •...
  • Page 228 4-3. Operating the lights and wipers ● In the following situations the system may not be able to correctly detect the surrounding brightness level. This may cause the low beams to remain on or the high beams to flash or dazzle pedestrians or vehicles ahead. In such a case, it is necessary to manually switch between the high and low beams.
  • Page 229: Windshield Wipers And Washer

    4-3. Operating the lights and wipers Windshield wipers and washer Operating the wiper lever The wiper operation is selected by moving the lever as follows. When intermittent windshield wiper operation is selected, the wiper interval can be also adjusted. Intermittent windshield wiper operation Low speed windshield...
  • Page 230 Damage to the washer fluid pump may be caused if the lever is pulled toward you and held continually. ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
  • Page 231 4-3. Operating the lights and wipers Changing the windshield wiper rest position/Lifting the wind- shield wipers When the windshield wipers are not being used, they retract to below the hood. To enable the windshield wipers to be lifted when parking in cold conditions or when replacing a windshield wiper insert, change the rest position of the windshield wipers to the service position using the wiper lever.
  • Page 232 4-3. Operating the lights and wipers ■ Lowering the windshield wipers to the retracted position With the windshield wipers placed on the windshield, turn the engine switch to “ON” position (vehicles without a smart key system) or IGNITION ON mode (vehicles with a smart key system) and then move the wiper lever to an oper- ating position.
  • Page 233: Opening The Fuel Tank Cap

    4-4. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap: Before refueling the vehicle ● Close all the doors and windows, and turn the engine switch off. ● Confirm the type of fuel. ■...
  • Page 234 4-4. Refueling WARNING ■ When refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● After exiting the vehicle and before opening the fuel door, touch an unpainted metal surface to discharge any static electricity.
  • Page 235 4-4. Refueling Opening the fuel tank cap Press the opener to open the fuel filler door. Turn the fuel tank cap slowly to remove it and hang it on the back of the fuel filler door. Closing the fuel tank cap After refueling, turn the fuel tank cap until you hear a click.
  • Page 236 WARNING ■ When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
  • Page 237: Toyota Safety Sense P

    ■ Toyota Safety Sense P The Toyota Safety Sense P is designed to operate under the assumption that the driver will drive safely, and is designed to help reduce the impact to the occupants and the vehicle in the case of a collision or assist the driver in normal driving conditions.
  • Page 238 Toyota will not disclose the recorded data to a third party except: • With the consent of the vehicle owner or with the consent of the lessee if the vehicle is leased •...
  • Page 239 4-5. Using the driving support systems Sensors Two types of sensors, located behind the front grille and windshield, detect information necessary to operate the drive assist systems. Radar sensor Camera sensor...
  • Page 240 Do not subject the radar sensor or surrounding area to a strong impact. If the radar sensor, front grille, or front bumper has been subjected to a strong impact, have the vehicle inspected by your Toyota dealer. ● Do not disassemble the radar sensor.
  • Page 241 ● Do not attach window tinting to the windshield. ● Replace the windshield if it is damaged or cracked. If the windshield needs to be replaced, contact your Toyota dealer. ● Do not get the camera sensor wet. ● Do not allow bright lights to shine into the camera sensor.
  • Page 242 ● Do not attach any accessories that may obstruct the camera sensor to the hood, front grille or front bumper. Contact your Toyota dealer for details. ● If a surfboard or other long object is to be mounted on the roof, make sure that it will not obstruct the camera sensor.
  • Page 243 4-5. Using the driving support systems ■ Certification For vehicles sold in the U.S.A.  For vehicles sold in Canada ...
  • Page 244: Pcs (Pre-Collision System)

    4-5. Using the driving support systems  PCS (Pre-Collision System) The pre-collision system uses a radar sensor and camera sen- sor to detect vehicles and pedestrians in front of your vehicle. When the system determines that the possibility of a frontal col- lision with a vehicle or pedestrian is high, a warning operates to urge the driver to take evasive action and the potential brake pressure is increased to help the driver avoid the collision.
  • Page 245 4-5. Using the driving support systems WARNING ■ Limitations of the pre-collision system ● The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. Do not use the pre-collision system instead of normal braking operations under any circumstances.
  • Page 246 4-5. Using the driving support systems WARNING ■ When to disable the pre-collision system In the following situations, disable the system, as it may not operate prop- erly, possibly leading to an accident resulting in death or serious injury: ● When the vehicle is being towed ●...
  • Page 247 4-5. Using the driving support systems Changing settings of the pre-collision system Enabling/disabling the pre-collision system ■ The pre-collision system can be enabled/disabled on (4.2-inch display) or (7-inch display) (P. 92, 104) of the multi-informa- tion display. The system is automatically enabled each time the engine switch is turned to IGNITION ON mode.
  • Page 248 4-5. Using the driving support systems ■ Operational conditions The pre-collision system is enabled and the system determines that the pos- sibility of a frontal collision with a vehicle or pedestrian is high. Each function is operational at the following speeds: ●...
  • Page 249 4-5. Using the driving support systems ■ Conditions under which the system may operate even if there is no pos- sibility of a collision ● In some situations such as the following, the system may determine that there is a possibility of a frontal collision and operate. •...
  • Page 250 4-5. Using the driving support systems • When there is a metal object (manhole cover, steel plate, etc.), steps, or a protrusion on the road surface or roadside • When crossing pedestrian approaches very close to the vehicle • When passing through a place with a low structure above the road (low ceil- ing, traffic sign, etc.) •...
  • Page 251 4-5. Using the driving support systems ■ Situations in which the system may not operate properly ● In some situations such as the following, a vehicle may not be detected by the radar sensor and camera sensor, preventing the system from operating properly: •...
  • Page 252 4-5. Using the driving support systems • When a very bright light, such as the sun or the headlights of oncoming traffic, shines directly into the camera sensor • When the surrounding area is dim, such as at dawn or dusk, or while at night or in a tunnel •...
  • Page 253 ● If the PCS warning light continues to flash or illuminate or the warning mes- sage does not disappear, the system may be malfunctioning. Have the vehi- cle inspected by your Toyota dealer immediately.
  • Page 254 4-5. Using the driving support systems ■ If VSC is disabled ● If VSC is disabled (P. 295), the pre-collision brake assist and pre-collision braking functions are also disabled. ● The PCS warning light will turn on and “VSC Turned Off Pre-Collision Brake System Unavailable”...
  • Page 255 4-5. Using the driving support systems LDA (Lane Departure Alert with steering  control) Summary of functions When driving on highways and freeways with white (yellow) lines, this function alerts the driver when the vehicle might depart from its lane and provides assistance by operating the steering wheel to keep the vehicle in its lane.
  • Page 256 4-5. Using the driving support systems Functions included in LDA system ◆ Lane departure alert function When the system determines that the vehicle might depart from its lane, a warning is dis- played on the multi-information display and the warning buzzer sounds to alert the driver.
  • Page 257 4-5. Using the driving support systems ◆ Vehicle sway warning function When the vehicle is swaying or appears as if it may depart from its lane multiple times, the warning buzzer sounds and a message is displayed on the multi-information display to alert the driver.
  • Page 258 Do not modify the suspension etc. If the suspension etc. needs to be replaced, contact your Toyota dealer. ● Do not install or place anything on the hood or grille. Also, do not install a grille guard (bull bars, kangaroo bar, etc.). ● If your windshield needs repairs, contact your Toyota dealer.
  • Page 259 4-5. Using the driving support systems Turning LDA system on Press the LDA switch to turn the LDA system on. The LDA indicator illuminates and a message is displayed on the multi-information display. Press the LDA switch again to turn the LDA system off.
  • Page 260 4-5. Using the driving support systems Indications on multi-information display The illustration used is intended as an example, and may differ from the image that is actually displayed on the multi-information display. LDA indicator The illumination condition of the indicator informs the driver of the system operation status.
  • Page 261 4-5. Using the driving support systems ■ Operation conditions of each function ● Lane departure alert function This function operates when all of the following conditions are met. • LDA is turned on. • Vehicle speed is approximately 32 mph (50 km/h) or more. •...
  • Page 262 4-5. Using the driving support systems ■ Temporary cancellation of functions When operation conditions are no longer met, a function may be temporarily canceled. However, when the operation conditions are met again, operation of the function is automatically restored. (P. 259) ■...
  • Page 263 4-5. Using the driving support systems ■ Conditions in which functions may not operate properly In the following situations, the camera sensor may not detect white (yellow) lines and various functions may not operate normally. ● There are shadows on the road that run parallel with, or cover, the white (yellow) lines.
  • Page 264 4-5. Using the driving support systems ■ If the LDA indicator is illuminated in yellow and a warning message is displayed on the multi-information display P. 498 ■ Customization Some functions can be customized. (P. 92, 104)
  • Page 265: Control With Full-Speed Range

    4-5. Using the driving support systems Dynamic radar cruise controlwith full-  speed range Summary of functions In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates, decelerates and stops to match the speed changes of the preceding vehicle even if the accelerator pedal is not depressed. In constant speed control mode, the vehicle runs at a fixed speed.
  • Page 266 4-5. Using the driving support systems WARNING ■ Before using dynamic radar cruise control with full-speed range Driving safely is the sole responsibility of the driver. Do not rely solely on the system, and drive safely by always paying careful attention to your surroundings.
  • Page 267 4-5. Using the driving support systems WARNING ■ To avoid inadvertent dynamic radar cruise control with full-speed range activation Switch the dynamic radar cruise control with full-speed range off using the cruise control main switch when not in use. ■ Situations unsuitable for dynamic radar cruise control with full-speed range Do not use dynamic radar cruise control with full-speed range in any of the...
  • Page 268 4-5. Using the driving support systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar sensor to detect the presence of vehicles up to approximately 328 ft. (100 m) ahead, determines the current vehicle-to-vehicle following distance, and operates to maintain a suit- able following distance from the vehicle ahead.
  • Page 269 4-5. Using the driving support systems Example of acceleration When there are no longer any preceding vehicles driving slower than the set speed The system accelerates until the set speed is reached. The system then returns to constant speed cruising. Setting the vehicle speed (vehicle-to-vehicle distance control mode) Press the cruise control main...
  • Page 270 4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the “+ RES” or “- SET” switch until the desired set speed is displayed. Increases the speed (Except when the vehicle has been stopped by system control in vehi- cle-to-vehicle distance control...
  • Page 271 4-5. Using the driving support systems Changing the vehicle-to-vehicle distance (vehicle-to-vehicle dis- tance control mode) Pressing the switch changes the Preceding vehicle-to-vehicle distance as fol- vehicle mark lows: Long Medium Short The vehicle-to-vehicle distance is set automatically to long mode when the engine switch is turned to IGNITION ON mode.
  • Page 272 4-5. Using the driving support systems Resuming follow-up cruising when the vehicle has been stopped by system control (vehicle-to-vehicle distance control mode) After the vehicle ahead of you starts off, press the “+ RES” switch. Your vehicle will also resume fol- low-up cruising if the accelerator pedal is depressed after the vehi- cle ahead of you starts off.
  • Page 273 4-5. Using the driving support systems Approach warning (vehicle-to-vehicle distance control mode) When your vehicle is too close to a vehicle ahead, and sufficient automatic deceleration via the cruise control is not possible, the display will flash and the buzzer will sound to alert the driver.
  • Page 274 4-5. Using the driving support systems Selecting constant speed control mode When constant speed control mode is selected, your vehicle will main- tain a set speed without controlling the vehicle-to-vehicle distance. Select this mode only when vehicle-to-vehicle distance control mode does not function correctly due to a dirty radar sensor, etc.
  • Page 275 • The driver’s door is opened. • The vehicle has been stopped for about 3 minutes If vehicle-to-vehicle distance control mode is automatically canceled for any other reason, there may be a malfunction in the system. Contact your Toyota dealer.
  • Page 276 ● Pre-collision braking is activated. If constant speed control mode is automatically canceled for any other rea- son, there may be a malfunction in the system. Contact your Toyota dealer. ■ Brake system operation sound If the brakes are applied automatically while the vehicle is in vehicle to vehicle distance control mode, a brake system operation sound may be heard from the engine compartment.
  • Page 277 4-5. Using the driving support systems ● Motorcycles traveling in the same lane ● When water or snow thrown up by the surrounding vehicles hinders the detecting of the sensor ● When your vehicle is pointing upwards (caused by a heavy load in the luggage compartment, etc.) ●...
  • Page 278: Dynamic Radar Cruise Control

    4-5. Using the driving support systems  Dynamic radar cruise control Summary of functions In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates and decelerates to match the speed changes of the pre- ceding vehicle even if the accelerator pedal is not depressed. In con- stant speed control mode, the vehicle runs at a fixed speed.
  • Page 279 4-5. Using the driving support systems WARNING ■ Before using dynamic radar cruise control Driving safely is the sole responsibility of the driver. Do not rely solely on the system, and drive safely by always paying careful attention to your surroundings.
  • Page 280 4-5. Using the driving support systems WARNING ■ Situations unsuitable for dynamic radar cruise control Do not use dynamic radar cruise control in any of the following situations. Doing so may result in inappropriate speed control and could cause an acci- dent resulting in death or serious injury.
  • Page 281 4-5. Using the driving support systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar sensor to detect the presence of vehicles up to approximately 328 ft. (100 m) ahead, determines the current vehicle-to-vehicle following distance, and operates to maintain a suit- able following distance from the vehicle ahead.
  • Page 282 4-5. Using the driving support systems Setting the vehicle speed (vehicle-to-vehicle distance control mode) Press the cruise control main switch to activate the cruise control. Radar cruise control indicator will come on and a message will be displayed on the multi-information display.
  • Page 283 4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the “+ RES” or “- SET” switch until the desired set speed is displayed. Increases the speed Decreases the speed Fine adjustment: Press the switch. Large adjustment: Press and hold the switch to change the speed, and release when the desired...
  • Page 284 4-5. Using the driving support systems Changing the vehicle-to-vehicle distance (vehicle-to-vehicle dis- tance control mode) Pressing the switch changes the Preceding vehicle-to-vehicle distance as fol- vehicle mark lows: Long Medium Short The vehicle-to-vehicle distance is set automatically to long mode when the engine switch is turned to IGNITION ON mode.
  • Page 285 4-5. Using the driving support systems Canceling and resuming the speed control Pressing the cancel switch can- cels the speed control. The speed control is also canceled when brake pedal depressed. Pressing the “+ RES” switch resumes the cruise control and returns vehicle speed to the set speed.
  • Page 286 4-5. Using the driving support systems Selecting constant speed control mode When constant speed control mode is selected, your vehicle will main- tain a set speed without controlling the vehicle-to-vehicle distance. Select this mode only when vehicle-to-vehicle distance control mode does not function correctly due to a dirty radar sensor, etc.
  • Page 287 The sensor cannot detect correctly because it is covered in some way. ● Pre-collision braking is activated. If vehicle-to-vehicle distance control mode is automatically canceled for any other reason, there may be a malfunction in the system. Contact your Toyota dealer.
  • Page 288 ● Pre-collision braking is activated. If constant speed control mode is automatically canceled for any other rea- son, there may be a malfunction in the system. Contact your Toyota dealer. ■ Brake system operation sound If the brakes are applied automatically while the vehicle is in vehicle to vehicle distance control mode, a brake system operation sound may be heard from the engine compartment.
  • Page 289 4-5. Using the driving support systems ■ When the sensor may not be correctly detecting the vehicle ahead In the case of the following and depending on the conditions, operate the brake pedal when deceleration of the system is insufficient or operate the accelerator pedal when acceleration is required.
  • Page 290 4-5. Using the driving support systems ■ Conditions under which the vehicle-to-vehicle distance control mode may not function correctly In the case of the following conditions, operate the brake pedal (or accelera- tor pedal, depending on the situation) as necessary. As the sensor may not be able to correctly detect vehicles ahead, the system may not operate properly.
  • Page 291: Cruise Control

    4-5. Using the driving support systems  Cruise control Use the cruise control to maintain a set speed without depress- ing the accelerator pedal. System Components Meter display ■ Set speed Indicators Operation switches ■ “+ RES” switch Cruise control main switch Cancel switch “- SET”...
  • Page 292 4-5. Using the driving support systems Setting the vehicle speed Press the cruise control main switch to activate the cruise control. Cruise control indicator will be dis- played. Press the switch again to deacti- vate the cruise control. Accelerate or decelerate the vehicle to the desired speed, and press the “- SET”...
  • Page 293 4-5. Using the driving support systems Adjusting the set speed To change the set speed, operate the “+ RES” or “- SET” switch until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Press the switch. Large adjustment: Press and hold the switch to change the speed, and release when the desired...
  • Page 294 If the cruise control speed cannot be set or if the cruise control cancels imme- diately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by your Toyota dealer.
  • Page 295 4-5. Using the driving support systems WARNING ■ To avoid operating the cruise control by mistake Switch the cruise control off using the cruise control main switch when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
  • Page 296: Driving Assist Systems

    4-5. Using the driving support systems Driving assist systems To keep driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehi- cle.
  • Page 297 4-5. Using the driving support systems ◆ EPS (Electric Power Steering) Employs an electric motor to reduce the amount of effort needed to turn the steering wheel ◆ PCS (Pre-Collision System) (if equipped) P. 242 ◆ BSM (Blind Spot Monitor) (if equipped) P.
  • Page 298 When the message is displayed on the multi-information display show- ing that TRAC has been disabled even if has not been pressed TRAC cannot be operated. Contact your Toyota dealer. ■ Operating conditions of hill-start assist control When the following four conditions are met, the hill-start assist control will operate: ●...
  • Page 299 4-5. Using the driving support systems ■ Sounds and vibrations caused by the ABS, brake assist, VSC, TRAC and hill-start assist control systems ● A sound may be heard from the engine compartment when the brake pedal is depressed repeatedly, when the engine is started or just after the vehicle begins to move.
  • Page 300 4-5. Using the driving support systems WARNING ■ The ABS does not operate effectively when ● The limits of tire gripping performance have been exceeded (such as excessively worn tires on a snow covered road). ● The vehicle hydroplanes while driving at high speed on wet or slick roads. ■...
  • Page 301 The ABS, TRAC and VSC systems will not function correctly if different tires are installed on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. ■ Handling of tires and the suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause a system to malfunction.
  • Page 302 4-5. Using the driving support systems  BSM (Blind Spot Monitor) Summary of the Blind Spot Monitor The Blind Spot Monitor is a system that has 2 functions; ● The BSM (Blind Spot Monitor) function Assists the driver in making a decision when changing lanes ●...
  • Page 303 4-5. Using the driving support systems Audio system screen (RCTA function only) If a vehicle approaching from the right or left at the rear of the vehicle is detected, the RCTA icon (P. 306) for the detected side will be displayed. buzzer ( function only) RCTA...
  • Page 304 4-5. Using the driving support systems ■ Certification for the Blind Spot Monitor For vehicles sold in the U.S.A.  For vehicles sold in Canada ...
  • Page 305 Do not attach accessories or stickers to the sensor or surrounding area on the bumper. ● Do not modify the sensor or surrounding area on the bumper. ● Do not paint the rear bumper any color other than an official Toyota color.
  • Page 306: Bsm Function

    4-5. Using the driving support systems BSM function The BSM function uses radar sensors to detect vehicles that are traveling in an adjacent lane in the area that is usually not reflected in the outside rear view mirror (the blind spot), and advises the driver of the vehicles existence via the outside rear view mirror indicator.
  • Page 307 4-5. Using the driving support systems ■ Conditions under which the BSM function will not detect a vehicle The BSM function is not designed to detect the following types of vehicles and/or objects: ● Small motorcycles, bicycles, pedestrians, etc. ● Vehicles traveling in the opposite direction ●...
  • Page 308: Rcta Function

    RCTA icon display (if equipped) ■ When a vehicle approaching from the right or left at the rear of the vehicle is detected, the following will be displayed on the audio sys- tem screen. Toyota parking Panoramic view Content assist monitor monitor...
  • Page 309 4-5. Using the driving support systems WARNING ■ Cautions regarding the use of the system The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. The RCTA function is only an assist and is not a replacement for careful driving.
  • Page 310 4-5. Using the driving support systems RCTA function detection areas The areas that vehicles can be detected in are outlined below. To give the driver a more consistent time to react, the buzzer can alert for faster vehicles from farther away. Example: Approximate Approaching vehicle...
  • Page 311 4-5. Using the driving support systems ■ Conditions under which the RCTA function may not function correctly The RCTA function may not detect vehicles correctly in the following condi- tions: ● When ice or mud etc. is attached to the rear bumper ●...
  • Page 312: Rear Camera Detection Function

    If a pedestrian is detected, a buzzer will sound and an icon on the audio system screen will be displayed to inform the driver of the pedestrian. Display Toyota parking assist monitor Panoramic view monitor   Pedestrian detection icon Displayed automatically when a pedestrian is detected.
  • Page 313 If the rear camera detection function is malfunctioning If a malfunction of the rear camera detection function is detected, one of the following messages will be displayed on the audio system screen. Have the vehicle inspected by your Toyota dealer. ● “RCD malfunction.”...
  • Page 314 4-5. Using the driving support systems ■ Situations in which the system may not operate properly ● Some pedestrians, such as the following, may not be detected by the Rear Camera Detection function, preventing the function from operating properly: • Pedestrians who are squatting •...
  • Page 315 4-5. Using the driving support systems • If the orientation of the rear camera has been changed due to a collision or other impact, or removal and installation • If a towing eyelet is installed to the rear of the vehicle •...
  • Page 316: Intuitive Parking Assist

    4-5. Using the driving support systems  Intuitive parking assist The distance from your vehicle to nearby obstacles when paral- lel parking or maneuvering into a garage is measured by the sensors and communicated via the displays and a buzzer. Always check the surrounding area when using this system.
  • Page 317 4-5. Using the driving support systems Display When the sensors detect an obstacle, the following displays inform the driver of the position and distance to the obstacle. Multi-information display ■ Front corner sensor opera- tion Front center sensor opera- tion Rear corner sensor operation Rear center sensor operation Select to mute the buzzer...
  • Page 318 4-5. Using the driving support systems Sensor detection display, obstacle distance Distance display ■ Sensors that detect an obstacle will illuminate continuously or blink. Insert display Approximate distance to obstacle Multi- Toyota Pan- informa- parking oramic Front and rear Front and rear tion dis-...
  • Page 319 4-5. Using the driving support systems Buzzer operation and distance to an obstacle ■ A buzzer sounds when the sensors are operating. ● The buzzer sounds faster as the vehicle approaches an obstacle. When the vehicle comes within the following distance of the obstacle, the buzzer sounds continuously: Approximately 1.2 ft.
  • Page 320 ■ Intuitive parking assist display When an obstacle is detected while the Toyota parking assist monitor or pan- oramic view monitor is in use, the warning indicator will appear in the upper part of the screen even if the display setting has been set to off.
  • Page 321 4-5. Using the driving support systems ■ Sensor detection information ●The sensor’s detection areas are limited to the areas around the vehicle’s bumper. ●Depending on the shape of the obstacle and other factors, the detection dis- tance may shorten, or detection may be impossible. ●Obstacles may not be detected if they are too close to the sensor.
  • Page 322 The area directly under the bumpers is not detected. ● If obstacles draw too close to the sensor. ● A non-genuine Toyota suspension (lowered suspension, etc.) is installed. ● A backlit license plate is installed. In addition to the examples above, there are instances in which, because of their shape, signs and other objects may be judged by a sensor to be closer than they are.
  • Page 323 When using intuitive parking assist In the following situations, the system may not function correctly due to a sensor malfunction, etc. Have the vehicle checked by your Toyota dealer. ● The intuitive parking assist operation display flashes, and a buzzer sounds when no obstacles are detected.
  • Page 324: Intelligent Clearance Sonar (Ics)

    4-5. Using the driving support systems  Intelligent Clearance Sonar (ICS) If a collision with an object may occur due to the vehicle sud- denly moving forward due to an accidental accelerator pedal operation, the vehicle moving the unintended direction due to the wrong shift position being selected, or while parking or traveling at low speeds, the sensors detect objects, such as a wall, in the traveling direction of the vehicle, and the system...
  • Page 325 4-5. Using the driving support systems ◆ When the accelerator pedal is depressed excessively ◆ When the vehicle moves in the unintended direction due to the wrong shift position being selected...
  • Page 326 4-5. Using the driving support systems Rear Cross Traffic Auto Brake function If a radar sensor detects a vehicle approaching from the right or left at the rear of the vehicle and a collision may occur, this function will per- form brake control to reduce the likelihood of an impact with the approaching vehicle.
  • Page 327 4-5. Using the driving support systems Types of sensors Front corner sensors Front center sensors Rear corner sensors Rear center sensors Turning the Intelligent Clearance Sonar system on/off Press of the meter con- trol switches, select Press of the meter con- trol switches, select Press of the meter con-...
  • Page 328 4-5. Using the driving support systems Displays and buzzers for engine output restriction control and brake control If the engine output restriction control or brake control operates, a buzzer will sound and a message will be displayed on the multi-infor- mation display to alert the driver.
  • Page 329 4-5. Using the driving support systems Intelligent Clearance Sonar function If the Intelligent Clearance Sonar function detects that a collision with an object is possible, the engine output will be restricted to restrain any increase in the vehicle speed. (Engine output restriction control: See A below.) Additionally, if the accelerator pedal continues to be depressed, the brakes will be applied automatically to reduce the vehicle speed.
  • Page 330 4-5. Using the driving support systems Time Down Time Down Time Accelerator pedal Start of control Brake pedal High possibility of a collision Engine output Extremely high possibility of a collision Braking force...
  • Page 331 4-5. Using the driving support systems ■ The Intelligent Clearance Sonar function will operate when The function will operate when the ICS OFF indicator is not illuminated or flashing (P. 325, 333) and all of the following conditions are met: ●...
  • Page 332 4-5. Using the driving support systems ■ Re-enabling the Intelligent Clearance Sonar system To re-enable the Intelligent Clearance Sonar system when it is disabled due to operation of the Intelligent Clearance Sonar function, either enable the sys- tem again (P. 325), or turn the engine switch off and then back to IGNITION ON mode.
  • Page 333 4-5. Using the driving support systems ■ Situations in which the Intelligent Clearance Sonar function may operate even if there is no possibility of a collision In some situations such as the following, the Intelligent Clearance Sonar function may operate even though there is no possibility of a collision. ●...
  • Page 334 4-5. Using the driving support systems ● Changes in the vehicle posture • If the vehicle is significantly tilted • If the front of the vehicle is raised or lowered due to the carried load • If the orientation of a sensor has been changed due to a collision or other impact ■...
  • Page 335 If this message continues to be displayed even after cleaning the sensor, or is displayed even though the sensor is clean, have the vehicle inspected by your Toyota dealer. ● Initialization may not have been performed after a battery terminal was dis- connected and reconnected.
  • Page 336 4-5. Using the driving support systems WARNING ■ Limitations of the Intelligent Clearance Sonar system Do not overly rely on the system, as doing so may lead to an accident. ● The driver is solely responsible for safe driving. Always drive carefully, tak- ing care to observe your surroundings.
  • Page 337 If the area around a sensor is subjected to an impact, the system may not operate properly due to the sensor being misaligned. Have the vehicle inspected by your Toyota dealer. ● When using a high pressure washer to wash the vehicle, do not spray the sensors directly, as doing so may cause a sensor to malfunction.
  • Page 338 4-5. Using the driving support systems Rear Cross Traffic Auto Brake function If the Rear Cross Traffic Auto Brake function detects that a collision with an approaching vehicle is possible, the engine output will be restricted to restrain any increase in vehicle speed. (Engine output restriction control: See A below.) Additionally, if the accelerator pedal continues to be depressed, the brakes will be applied automatically to reduce the vehicle speed.
  • Page 339 4-5. Using the driving support systems Time Down Time Down Time Accelerator pedal Start of control Brake pedal High possibility of a collision Engine output Extremely high possibility of a collision Braking force...
  • Page 340 4-5. Using the driving support systems ■ The Rear Cross Traffic Auto Brake function will operate when The function will operate when the ICS OFF indicator is not illuminated or flashing (P. 325, 333) and all of the following conditions are met: ●...
  • Page 341 4-5. Using the driving support systems ■ Re-enabling the Rear Cross Traffic Auto Brake function To re-enable the Rear Cross Traffic Auto Brake function when it is disabled while it is operating, either enable the Intelligent Clearance Sonar system again (P. 325), or turn the engine switch off and then back to IGNITION ON mode.
  • Page 342 4-5. Using the driving support systems ■ Situations in which the system may operate even though there is no possibility of a collision In some situations such as the following, the Rear Cross Traffic Auto Brake function may operate even though there is no possibility of a collision. ●...
  • Page 343 4-5. Using the driving support systems ■ Situations in which the Rear Cross Traffic Auto Brake function may not operate properly In some situations such as the following, this function may not operate prop- erly. ● Objects and vehicles which the radar sensors are not designed to detect •...
  • Page 344 4-5. Using the driving support systems • When backing out of a shallow angle parking spot • Vehicles that the sensors cannot detect due to obstructions • When backing up on a slope with a sharp change in grade • When a vehicle turns into the detec- tion area ■...
  • Page 345: Driving Mode Select Switches

    4-5. Using the driving support systems  Driving mode select switches The driving modes can be selected to suit driving condition. Normal mode Use for normal driving. While in Eco drive mode or sport mode, press the switch to change the driving mode to normal mode.
  • Page 346 4-5. Using the driving support systems ■ Operation of the air conditioning system in Eco drive mode Eco drive mode controls the heating/cooling operations and fan speed of the air conditioning system to enhance fuel efficiency (P. 350, 355). To improve air conditioning performance, adjust the fan speed or turn off Eco drive mode.
  • Page 347: Winter Driving Tips

    4-6. Driving tips Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a man- ner appropriate to the prevailing weather conditions. Preparation for winter ● Use fluids that are appropriate to the prevailing outside tempera- tures.
  • Page 348 If the shift lever can be shifted from P, there may be a problem with the shift lock system. Have the vehicle inspected by your Toyota dealer immediately. Selecting tire chains Vehicles with 16 and 17-inch tires ...
  • Page 349 4-6. Driving tips Regulations on the use of tire chains Regulations regarding the use of tire chains vary depending on loca- tion and type of road. Always check local regulations before installing chains. ■ Tire chain installation Observe the following precautions when installing and removing chains: ●...
  • Page 350 NOTICE ■ Repairing or replacing snow tires Request repairs or replacement of snow tires from Toyota dealers or legiti- mate tire retailers. This is because the removal and attachment of snow tires affects the opera- tion of the tire pressure warning valve and transmitters.
  • Page 351: 5-1. Using The Air Conditioning

    Interior features 5-1. Using the air 5-3. Using the storage conditioning system features and defogger List of storage features ..373 Manual air conditioning • Glove box...... 374 system......350 • Console box....374 Automatic air conditioning • Coin holder ....374 system (without “SYNC”...
  • Page 352: Manual Air Conditioning System

    5-1. Using the air conditioning system and defogger  Manual air conditioning system Air conditioning controls Adjusting the temperature setting ■ To adjust the temperature setting, turn clockwise to increase the temperature and counterclockwise to decrease the temperature. is not pressed, the system will blow ambient temperature air or heated air.
  • Page 353 5-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes ■ Press The mode switches between outside air mode (indicator off) and recir- culated air mode (indicator on) each time is pressed. Defogging the windshield ■...
  • Page 354: Air Outlets

    5-1. Using the air conditioning system and defogger Air outlets Location of air outlets ■ The air outlets and air volume change according selected airflow mode. Adjusting the position of and opening and closing the air out- ■ lets Direct air flow to the left or right, up or down.
  • Page 355 5-1. Using the air conditioning system and defogger ■ Outside/recirculated air mode ● When driving on dusty roads such as tunnels or in heavy traffic, set the out- side/recirculated air mode button to the recirculated air mode. This is effec- tive in preventing outside air from entering the vehicle interior.
  • Page 356 5-1. Using the air conditioning system and defogger WARNING ■ To prevent the windshield from fogging up ● Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, block- ing your vision.
  • Page 357: Automatic Air Conditioning

    5-1. Using the air conditioning system and defogger Automatic air conditioning system  (without “SYNC” button) Air outlets and fan speed are automatically adjusted according to the temperature setting. Air conditioning controls Adjusting the temperature setting ■ To adjust the temperature setting, turn clockwise to increase the temperature and counterclockwise to decrease the tempera- ture.
  • Page 358 5-1. Using the air conditioning system and defogger Change the airflow mode ■ To change the airflow mode, press “<” or “>” on Air flows to the upper body. Air flows to the upper body and feet. Air flows to the feet. Air flows to the feet and the windshield defogger oper- ates.
  • Page 359 5-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes ■ Press The mode switches between outside air mode (indicator off) and recir- culated air mode (indicator on) each time is pressed. Defogging the windshield ■...
  • Page 360 5-1. Using the air conditioning system and defogger Air outlets Location of air outlets ■ The air outlets and air volume change according selected airflow mode. Adjusting the position of and opening and closing the air out- ■ lets Direct air flow to the left or right, up or down.
  • Page 361 5-1. Using the air conditioning system and defogger ■ Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed.
  • Page 362 5-1. Using the air conditioning system and defogger ■ Ventilation and air conditioning odors ● To let fresh air in, set the air conditioning system to the outside air mode. ● During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system.
  • Page 363 5-1. Using the air conditioning system and defogger Automatic air conditioning system  (with “SYNC” button) Air outlets and fan speed are automatically adjusted according to the temperature setting. Air conditioning controls Type A  Type B   : If equipped...
  • Page 364 5-1. Using the air conditioning system and defogger Adjusting the temperature setting ■ To adjust the temperature setting, turn clockwise to increase the temperature and counterclockwise to decrease the tempera- ture. The air conditioning system switches between individual and synchro- nized modes each time is pressed.
  • Page 365 5-1. Using the air conditioning system and defogger Change the airflow mode ■ To change the airflow mode, press outlets used switched each time the button is pressed. Air flows to the upper body. Air flows to the upper body and feet.
  • Page 366 5-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes ■ Press The mode switches between outside air mode (indicator off) and recir- culated air mode (indicator on) each time is pressed. Defogging the windshield ■...
  • Page 367 5-1. Using the air conditioning system and defogger Air outlets Location of air outlets ■ The air outlets and air volume change according selected airflow mode. Adjusting the position of and opening and closing the air out- ■ lets Front Rear ...
  • Page 368 5-1. Using the air conditioning system and defogger ■ Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed.
  • Page 369 5-1. Using the air conditioning system and defogger ■ Operation of the air conditioning system in Eco drive mode (if equipped) ● In the Eco drive mode, “ECO” is displayed on the air conditioning screen and the air conditioning system is controlled as follows to prioritize fuel effi- ciency: •...
  • Page 370 5-1. Using the air conditioning system and defogger WARNING ■ To prevent the windshield from fogging up ● Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, block- ing your vision.
  • Page 371: Seat Heaters

    5-1. Using the air conditioning system and defogger  Seat heaters WARNING ● Care should be taken to prevent injury if anyone in the following categories comes in contact with the seats when the heater is on: • Babies, small children, the elderly, the sick and the physically chal- lenged •...
  • Page 372: Interior Lights List

    5-2. Using the interior lights Interior lights list Front interior/personal lights (P. 371, 372) Shift lever light (if equipped) Inside door handle lights (if equipped) Rear interior light (if equipped) (P. 371) Rear personal lights (if equipped) (P. 372) Door courtesy lights Instrument panel ornament light (if equipped) Front center console light (if equipped) Footwell lights (if equipped)
  • Page 373: Interior Lights

    5-2. Using the interior lights Interior lights Front (if equipped) ■ The rear personal lights (if equipped) turn on/off together with the front interior light. Turns the lights on/off linked to door positions Turns the lights on/off Rear (if equipped) ■...
  • Page 374: Personal Lights

    5-2. Using the interior lights Personal lights Front ■ Turns the lights on/off Rear (if equipped) ■ Turns the lights on/off ● Illuminated entry system: Vehicles without a smart key system: The lights automatically turn on/off according to the engine switch position, whether the doors are locked/unlocked, and whether the doors are open/ closed.
  • Page 375: List Of Storage Features

    5-3. Using the storage features List of storage features Auxiliary boxes (P. 377) Console box (P. 374) Glove box (P. 374) Auxiliary box/open tray (P. 377, 378) Bottle holders/door pockets (P. 375) Coin holder (if equipped) (P. 374) Cup holders (P.
  • Page 376: Glove Box

    5-3. Using the storage features Glove box Unlock with the key (vehicles without a smart key system) or mechanical key (vehicles with a smart key system) Lock with the key (vehicles without a smart key system) or mechanical key (vehicles with a smart key system) Open (pull lever) The glove box light turns on when the tail lights are on.
  • Page 377: Bottle Holders

    5-3. Using the storage features Bottle holders Front Rear   ● When storing a bottle, close the cap. ● The bottle may not be stored depending on its size or shape. WARNING Do not place anything other than a bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
  • Page 378: Cup Holders

    5-3. Using the storage features Cup holders Front Rear (if equipped)   Pull the armrest down. WARNING ● Do not place anything other than cups or aluminum cans in the cup hold- ers. Other items may be thrown out of the holders in the event of an acci- dent or sudden braking, causing injury.
  • Page 379: Auxiliary Boxes

    5-3. Using the storage features Auxiliary boxes Type A (if equipped) Type B (if equipped)   Push the lid. Type C  Opening: Push the tray forward until it locks. Closing: Push the tray forward to release the lock and the tray will automati- cally close.
  • Page 380: Open Tray

    5-3. Using the storage features WARNING ■ Items unsuitable for storing (type A) Do not store items heavier than 0.4 lb. (0.2 kg). Doing so may cause the auxiliary box to open and the items inside may fall out, resulting in an accident. NOTICE ■...
  • Page 381: Trunk Features

    5-3. Using the storage features Trunk features Grocery bag hooks NOTICE To prevent damage to the hooks, do not apply too much load to the hooks.
  • Page 382: Other Interior Features

    5-4. Other interior features Other interior features Sun visors To set the visor in the forward position, flip it down. To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. To use the side extender, place the visor in the side position, then slide it backward.
  • Page 383: Power Outlet

    5-4. Other interior features Power outlet Please use as a power supply for electronic goods that use less than 12 VDC/10 A (power consumption of 120 W). Open the lid. Vehicles without a smart key system: The power outlet can be used when the engine switch is in the “ACC” or “ON” position.
  • Page 384: Usb Charging Ports

    5-4. Other interior features USB charging ports (if equipped) The USB charging ports are used to supply 2.1 A of electricity at 5 V to external devices. The USB charging ports are for charging only. They are not designed for data transfer or other purposes. Depending on the external device, it may not charge properly.
  • Page 385 5-4. Other interior features NOTICE ■ To prevent damage to the USB charging ports ● Do not insert foreign objects into the ports. ● Do not spill water or other liquids into the ports. ● When the USB charging ports are not in use, close the lids. If a foreign object or liquid enters a port may cause a short circuit.
  • Page 386: Wireless Charger

    5-4. Other interior features Wireless charger (if equipped) A portable device, such as a smartphone or mobile battery, can be charged by just placing it on the charging area, provided the device is compatible with the Qi wireless charging standard created by the Wireless Power Consortium.
  • Page 387 5-4. Other interior features Using the wireless charger ■ Press power supply switch of the wireless char- ger. Pressing the switch again turns the wireless charger off. When turned on, the operation indicator light (green) comes on. When the engine switch is turned off, the on/off state of the wireless charger will be memo- rized.
  • Page 388 (orange). Take the appropriate measures according to the table below. Operation indicator light Suspected causes Measure Blinks (orange) at a Vehicle to charger com- Contact your Toyota second interval munication failure. dealer. continuously A foreign object exists between the portable...
  • Page 389 5-4. Other interior features ■ The wireless charger can be operated when The engine switch is in ACCESSORY or IGNITION ON mode. ■ Portable devices that can be charged ● Portable devices compatible with the Qi wireless charging standard can be charged by the wireless charger.
  • Page 390 5-4. Other interior features ■ Certification for the wireless charger...
  • Page 391 5-4. Other interior features...
  • Page 392 5-4. Other interior features...
  • Page 393 5-4. Other interior features WARNING ■ Caution while driving When charging a portable device while driving, for safety reasons, the driver should not operate the portable device. ■ Caution regarding interference with electronic devices People with implantable cardiac pacemakers, cardiac resynchronization therapy pacemakers or implantable cardioverter defibrillators, as well as any other electrical medical device, should consult their physician about the usage of the wireless charger.
  • Page 394 If in situations other than above the wireless charger does not operate prop- erly or the operation indicator light is blinking, the wireless charger may be malfunctioning. Contact your Toyota dealer. ■ To prevent failure or damage to data ●...
  • Page 395: Armrest

    5-4. Other interior features Armrest (if equipped) Fold down the armrest for use. NOTICE To prevent damage to the armrest, do not apply too much load on the arm- rest. Assist grips An assist grip installed on the ceil- ing can be used to support your body while sitting on the seat.
  • Page 396: Coat Hooks

    5-4. Other interior features Coat hooks Coat hooks are provided on the rear assist grips. WARNING Do not hang coat hangers or other hard or sharp objects on the hook. If the SRS curtain shield airbags deploy, these items may become projectiles, causing death or serious injury.
  • Page 397: Garage Door Opener

    5-4. Other interior features  Garage door opener The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, security systems, and other devices. ® HomeLink ® The HomeLink wireless control system in your vehicle has 3 buttons which can be programmed to operate 3 different devices.
  • Page 398 5-4. Other interior features ® Programming the HomeLink ■ Steps through must be performed within 60 seconds, other- wise the indicator light will stop flashing and programming will not be able to be completed. ® Press and release the HomeLink button you want to program ®...
  • Page 399 5-4. Other interior features ® Test the HomeLink operation by pressing the newly pro- grammed button and observing the indicator light: ● Indicator light illuminates: Programming of a fixed code device has completed. The garage door or other device should operate ®...
  • Page 400 5-4. Other interior features Press and hold the desired ® HomeLink button (inside the vehicle) for 2 seconds and release Repeat this sequence (press/hold/ release) up to 3 times to complete programming. If the garage door opener motor operates when the ®...
  • Page 401 5-4. Other interior features ® Reprogramming a single HomeLink button ■ When the following procedure is performed, buttons which already have devices registered to them can be overwritten: ® With one hand, press and hold the desired HomeLink button. ® When the HomeLink indicator starts flashing orange, continue ®...
  • Page 402 5-4. Other interior features ® Erasing the entire HomeLink memory (all three codes) Press and hold the 2 outside but- tons for 10 seconds until the ® HomeLink indicator light changes from continuously lit orange to rapidly flashing green. If you sell your vehicle, be sure to erase the programs stored in the ®...
  • Page 403 5-4. Other interior features ■ When support is necessary Visit on the web at www.homelink.com/toyota or call 1-800-355-3515. WARNING ■ When programming a garage door or other remote control device The garage door or other device may operate, so ensure people and objects are out of danger to prevent potential harm.
  • Page 404: Safety Connect

    Telematics Subscription Service Agreement and its Terms and Conditions, as in effect and amended from time to time, a current copy of which is available at Toyota.com. All use of the Safety Connect service is subject to such then-applicable Terms and Conditions.
  • Page 405 A variety of subscription terms are available for purchase. Contact your Toyota dealer, call the Safety Connect response center at 1- 855-405-6500, or push the “SOS” button in your vehicle for further subscription details.
  • Page 406 ● Green indicator light flashing = Safety Connect call in process ● Red indicator light (except at vehicle start-up) = System malfunction (contact your Toyota dealer) ● No indicator light (off) = Safety Connect service not active Safety Connect services Automatic Collision Notification ■...
  • Page 407 In addition to assisting law enforcement with recovery of a stolen vehicle, Safety-Connect-equipped vehicle location data may, under certain circumstances, be shared with third parties to locate your vehicle. Further information is available at Toyota.com. Emergency Assistance Button (“SOS”) ■...
  • Page 408 5-4. Other interior features Safety information for Safety Connect Important! Read this information before using Safety Connect. Exposure to radio frequency signals ■ The Safety Connect system installed in your vehicle is a low-power radio transmitter and receiver. It receives and also sends out radio frequency (RF) signals.
  • Page 409 5-4. Other interior features ■ Certification for Safety Connect...
  • Page 410: Compass

    5-4. Other interior features  Compass The compass on the inside rear view mirror indicates the direc- tion in which the vehicle is heading. Operation To turn the compass on or off, press and hold the button for 3 seconds. Displays and directions Display Direction...
  • Page 411 5-4. Other interior features Calibrating the compass The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle. If you cross over a map boundary shown in illustration, the compass will deviate.
  • Page 412 5-4. Other interior features Circling calibration ■ Stop the vehicle in a place where it is safe to drive in a circle. Press and hold the button for 9 seconds. “C” appears on the compass display. Drive the vehicle at 5 mph (8 km/h) or less in a circle until a direction is displayed.
  • Page 413 5-4. Other interior features WARNING ■ While driving the vehicle Do not adjust the display. Adjust the display only when the vehicle is stopped. ■ When doing the circling calibration Secure a wide space, and watch out for people and vehicles in the neigh- borhood.
  • Page 414 5-4. Other interior features...
  • Page 415: 6-1. Maintenance And Care

    Maintenance and care 6-1. Maintenance and care Cleaning and protecting the vehicle exterior..414 Cleaning and protecting the vehicle interior... 417 6-2. Maintenance Maintenance requirements ....420 General maintenance..423 Emission inspection and maintenance (I/M) programs......427 6-3. Do-it-yourself maintenance Do-it-yourself service precautions .....
  • Page 416: Cleaning And Protecting The Vehicle Exterior

    6-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
  • Page 417 ■ Precaution regarding the rear bumper with Blind Spot Monitor (if equipped) If the paint of the rear bumper is chipped or scratched, the system may mal- function. If this occurs, avoid using the system and consult your Toyota dealer.
  • Page 418 6-1. Maintenance and care NOTICE ■ To prevent paint deterioration and corrosion on the body and compo- nents (aluminum wheels, etc.) ● Wash the vehicle immediately in the following cases: • After driving near the sea coast • After driving on salted roads •...
  • Page 419: Cleaning And Protecting The Vehicle Interior

    6-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior ● Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water.
  • Page 420 6-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle's interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
  • Page 421 Water may also cause the body to rust. ■ When cleaning the inside of the windshield (vehicles with Toyota Safety Sense P) Do not allow glass cleaner to contact the lens. Also, do not touch the lens.
  • Page 422: Requirements

    Toyota recommends the following main- tenance: General maintenance General maintenance should be performed on a daily basis. This can be done by yourself or by a Toyota dealer. Scheduled maintenance Scheduled maintenance should be performed at specified intervals according to the maintenance schedule.
  • Page 423 ■ Repair and replacement It is recommended that genuine Toyota parts be used for repairs to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.
  • Page 424 6-2. Maintenance WARNING ■ If your vehicle is not properly maintained Improper maintenance could result in serious damage to the vehicle and possible death or serious injury. ■ Important health and safety information ● Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm.
  • Page 425: General Maintenance

    “Owner’s Warranty Information Booklet” or “Owner’s Manual Supplement/Sched- uled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment...
  • Page 426: Vehicle Interior

    6-2. Maintenance Vehicle interior Items Check points • The accelerator pedal should Accelerator pedal move smoothly (without uneven pedal effort or catching). • When parked on a slope and the Automatic transmission “Park” shift lever is in P, is the vehicle mechanism securely stopped? •...
  • Page 427 6-2. Maintenance Items Check points • Do seat belts operate smoothly? Seat belts • The seat belts should not be dam- aged. • Do the seat controls operate prop- Seats erly? • Does the steering wheel rotate smoothly? • Does the steering wheel have the Steering wheel correct amount of free play? •...
  • Page 428 6-2. Maintenance WARNING ■ If the engine is running Turn the engine off and ensure that there is adequate ventilation before per- forming maintenance checks.
  • Page 429: Maintenance (I/M Programs

    The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. Your vehicle may not pass the I/M test in the following situations: ●...
  • Page 430: Do-It-Yourself Service Precautions

    • Rag or paper towel (P. 439) • Funnel (used only for adding brake fluid) • “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol-based non-silicate, non- amine, non-nitrite and non-borate coolant with long- life hybrid organic acid technology U.S.A.:...
  • Page 431 6-3. Do-it-yourself maintenance WARNING The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. ■ When working on the engine compartment ● Keep hands, clothing and tools away from the moving fan and engine drive belt.
  • Page 432: Hood

    6-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release lever. The hood will pop up slightly. Pull up the auxiliary catch lever and lift the hood. ■ Open hood warning buzzer If the vehicle reaches a speed of 3 mph (5 km/h), the master warning light flashes and a buzzer sounds to indicate that the hood is not fully closed.
  • Page 433: Positioning A Floor Jack

    6-3. Do-it-yourself maintenance Positioning a floor jack When using a floor jack, follow the instructions in the manual provided with the jack and perform the operation safely. When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury.
  • Page 434: Engine Compartment

    6-3. Do-it-yourself maintenance Engine compartment 2.5 L 4-cylinder (A25A-FKS) engine  Fuse boxes (if equipped) Battery (P. 440) (P. 470) Radiator (P. 438) Engine oil filler cap (P. 435) Electric cooling fan Engine oil level dipstick Condenser (P. 438) (P. 434) Engine coolant reservoir Brake fluid reservoir (P.
  • Page 435 6-3. Do-it-yourself maintenance 3.5 L V6 (2GR-FKS) engine  Fuse boxes (if equipped) Radiator (P. 438) (P. 470) Electric cooling fan Engine oil filler cap (P. 435) Condenser (P. 438) Engine oil level dipstick Engine coolant reservoir (P. 434) (P. 437) Brake fluid reservoir Washer fluid tank (P.
  • Page 436 6-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil ■ Park the vehicle on level ground. After warming up the engine and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
  • Page 437 6-3. Do-it-yourself maintenance Adding engine oil ■ If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
  • Page 438 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal. ●...
  • Page 439: Engine Coolant

    If the coolant level drops within a short time of replenishing Visually check the radiator, hoses, engine coolant reservoir caps, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system.
  • Page 440 Radiator and condenser Check the radiator and condenser and clear away any foreign objects. If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your Toyota dealer. WARNING ■...
  • Page 441: Brake Fluid

    6-3. Do-it-yourself maintenance Brake fluid Checking fluid level ■ The brake fluid level should be between the “MAX” and “MIN” lines on the tank. “MAX” “MIN” Adding fluid ■ Make sure to check the fluid type and prepare the necessary item. Fluid type FMVSS No.116 DOT 3 or SAE J1703 brake fluid Item...
  • Page 442 6-3. Do-it-yourself maintenance Battery Check the battery as follows. Battery exterior ■ Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. Terminals Hold-down clamp Checking battery fluid (batteries with vent plugs) ■...
  • Page 443 Make sure to turn off the engine before disconnecting the battery. Take extra care when connecting the bat- tery if the engine switch mode prior to discharge is unknown. If the system will not start even after multiple attempts, contact your Toyota dealer. WARNING ■...
  • Page 444 6-3. Do-it-yourself maintenance WARNING ■ How to recharge the battery (batteries without vent plugs) Only perform a slow charge (5 A or less). The battery may explode if charged at a quicker rate. ■ Emergency measures regarding electrolyte ● If electrolyte gets in your eyes Flush your eyes with clean water for at least 15 minutes and get immedi- ate medical attention.
  • Page 445: Washer Fluid

    6-3. Do-it-yourself maintenance Washer fluid Add washer fluid in the following situations: ● A washer does not work. ● “Windshield Washer Fluid Low” is displayed on the multi-infor- mation display. WARNING ■ When adding washer fluid Do not add washer fluid when the engine is hot or running as washer fluid contains alcohol and may catch fire if spilled on the engine, etc.
  • Page 446: Tires

    Tire rotation Rotate the tires in the order shown. To equalize tire wear and extend tire life, Toyota recommends that tire rotation is carried out at the same interval as tire inspection. Front Do not fail to initialize the tire pressure warning system after tire rotation.
  • Page 447 6-3. Do-it-yourself maintenance Tire pressure warning system Your vehicle is equipped with a tire pressure warning system that uses tire pressure warning valve and transmitters to detect low tire inflation pressure before serious problems arise. Vehicles without a tire inflation pressure display function ...
  • Page 448 6-3. Do-it-yourself maintenance ◆ Installing tire pressure warning valve and transmitters When replacing the tires or wheels, the tire pressure warning valve and transmitters must be installed to the wheels which will be installed to the vehicle. When new tire pressure warning valve and transmitters are installed, new ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized.
  • Page 449 6-3. Do-it-yourself maintenance 4.2-inch display: Select “Vehicle Settings” and then press 7-inch display: Select and then press and hold Select “TPWS” and then press Select “Set Pressure” then press and hold until the tire pressure warning light blinks 3 times. Then a message will be dis- played on the multi-information display.
  • Page 450 A second set of tire pressure warning system sensor ID codes can be registered at your Toyota dealer. When 2 sets of ID codes have been registered, either ID code set can be selected. Vehicles with a tire inflation pressure display function ...
  • Page 451 6-3. Do-it-yourself maintenance How to register the ID codes (vehicles with a tire inflation pres- ■ sure display function) Select (4.2-inch display) or (7-inch display) on the multi- information display using the meter control switches on the steer- ing wheel. (→P. 92, 104) 4.2-inch display: Select “Vehicle Settings”...
  • Page 452 ● A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer. ■ Replacing tires and wheels If the ID codes of the tire pressure warning valve and transmitters are not registered, the tire pressure warning system will not work properly.
  • Page 453 ● In the following situations, the tire pressure warning system may not operate properly. • If non-genuine Toyota wheels are used. • If a tire has been replaced with a tire that is not an OE (Original Equipment) tire. • If a tire has been replaced with a tire that is not of the specified size.
  • Page 454 6-3. Do-it-yourself maintenance ● Performance may be affected in the following situations. • When driving near a TV tower, electric power plant, gas station, radio station, large display, airport or other facility that generates strong radio waves or electrical noise •...
  • Page 455 If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. ● If initialization is attempted and the tire pressure warning light does not blink 3 times.
  • Page 456 6-3. Do-it-yourself maintenance ■ When registering ID codes (vehicles with a tire inflation pressure dis- play function) ● Before performing ID code registration, make sure that no wheels with tire pressure warning valve and transmitters installed are near the vehi- cle.
  • Page 457 • If, when the vehicle has been driven for about 20 minutes after per- forming ID code registration, the tire pressure warning light blinks for approximately 1 minute and then illuminates. ● If ID code registration cannot be completed after performing the above procedure, contact your Toyota dealer.
  • Page 458 6-3. Do-it-yourself maintenance ■ Tire pressure warning system certification For vehicles sold in the U.S.A.  For vehicles sold in Canada ...
  • Page 459 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
  • Page 460 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
  • Page 461: Tire Inflation Pressure

    6-3. Do-it-yourself maintenance Tire inflation pressure Tire inflation pressure The recommended cold tire inflation pressure and tire size are dis- played on the tire and loading information label. (P. 547) Type A  Type B ...
  • Page 462 Driving with incorrect tire inflation pressure may result in the following: ● Reduced fuel economy ● Reduced driving comfort and poor handling ● Reduced tire life due to wear ● Reduced safety ● Damage to the drivetrain If a tire needs frequent inflating, have it checked by your Toyota dealer.
  • Page 463 6-3. Do-it-yourself maintenance ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ● Check only when the tires are cold. If your vehicle has been parked for at least 3 hours or has not been driven for more than 1 mile or 1.5 km, you will get an accurate cold tire inflation pressure reading.
  • Page 464: Wheels

    ● Used wheels ● Bent wheels that have been straightened Aluminum wheel precautions (if equipped) ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km).
  • Page 465 Because tire repair or replacement may affect the tire pressure warn- ing valve and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valve and transmitters at your Toyota dealer.
  • Page 466: Air Conditioning Filter

    6-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method Turn the engine switch off. Open glove remove the glove box cover inside the glove box. Remove the filter cover. Unlock the filter cover.
  • Page 467 6-3. Do-it-yourself maintenance Remove the air conditioning fil- ter from the filter case and replace it with a new one. The “UP” marks shown on the fil- ter and the filter case should be pointing up. ■ Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule.
  • Page 468: Wireless Remote Control Electronic Key Battery

    6-3. Do-it-yourself maintenance Wireless remote control/electronic key battery Replace the battery with a new one if it is depleted. You will need the following items: ● Flathead screwdriver ● Small flathead screwdriver ● Lithium battery CR2032 Replacing the battery Vehicles without a smart key system ...
  • Page 469 6-3. Do-it-yourself maintenance Install the battery cover with the tab facing up. Push the entire edge of the battery cover into the key. Install the key cover. Align the key cover with the key and then press it straight into the key.
  • Page 470 6-3. Do-it-yourself maintenance Vehicles with a smart key system  Release the lock and remove the mechanical key. Remove the key cover. To prevent damage to the key, cover the tip of the flathead screw- driver with a rag. Remove the depleted battery using a small flathead screw- driver.
  • Page 471 Be careful not to lose the battery or any other small parts. ■ Use a CR2032 lithium battery ● Batteries can be purchased at your Toyota dealer, local electrical appliance shops or camera stores. ● Replace only with the same or equivalent type recommended by the manu- facturer.
  • Page 472: Checking And Replacing Fuses

    6-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as nec- essary. Turn the engine switch off. Open the fuse box cover. Engine compartment (type A) Engine compartment (type B) ...
  • Page 473 6-3. Do-it-yourself maintenance Remove the fuse with the pull- out tool. Only type A fuses can be removed using the pullout tool. Check if the fuse is blown. Type A Type B   Type C  Normal fuse Blown fuse Replace the blown fuse with a new fuse of an appropriate amperage rat- ing.
  • Page 474 If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement. (P. 473) ● If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer. ■ If there is an overload in a circuit The fuses are designed to blow, protecting the wiring harness from damage.
  • Page 475: Light Bulbs

    Light bulbs You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.
  • Page 476 6-3. Do-it-yourself maintenance Replacing light bulbs Front turn signal/parking lights (bulb type) ■ Turn bulb base counterclockwise. Remove the light bulb. Install a new light bulb and then install the bulb base to the light unit by inserting it and turning it clockwise.
  • Page 477 6-3. Do-it-yourself maintenance Front side marker lights (bulb type) ■ To ensure enough space to perform work, turn the steer- ing wheel to move the front wheel away from the light bulb to be replaced. Turn the steering wheel to the left when replacing the right side light bulb, and turn the steering wheel to the right when replac-...
  • Page 478 6-3. Do-it-yourself maintenance Insert a small flathead screw- driver between front bumper and fender liner at the position marked with a “” and then separate the front bumper from the fender liner. To separate the front bumper from the fender liner, pry up the fender liner while pulling the front bumper outward as shown in the illustration.
  • Page 479 6-3. Do-it-yourself maintenance Return the fender liner to its original position, and install the clips. Make sure that the fender liner is correctly positioned on the inner side of the front bumper. To Install the fender liner to the front bumper, engage the clip to the front bumper.
  • Page 480 6-3. Do-it-yourself maintenance Back-up lights (bulb type) ■ Open the trunk lid and remove the clips. Type A: To prevent damaging the vehicle, wrap the tip of the flathead screwdriver with tape. Type A Type B   Partly remove the trunk lid cover.
  • Page 481 6-3. Do-it-yourself maintenance Remove the light bulb. Install a new light bulb and then install the bulb base to the light unit by inserting it and turning it clockwise. Connect connector. (When replacing right side bulb only.) Reinstall the trunk lid cover with the clips. Type A Type B ...
  • Page 482 6-3. Do-it-yourself maintenance Rear turn signal lights (bulb type) and rear side marker lights ■ (bulb type) Open the trunk and apply protective tape to the vehicle body around the light unit. Use masking tape, etc. Do not use duct tape, as it may leave residue or damage the paint when removed.
  • Page 483 6-3. Do-it-yourself maintenance Remove the light unit. Attach a long piece of packing tape to the light unit and fold the excess in half. Hold the folded portion and pull it toward the rear of the vehicle to remove the light unit. Turn the bulb base counterclockwise.
  • Page 484 6-3. Do-it-yourself maintenance Install a new light bulb and then install the bulb base to the light unit by inserting it and turning it clockwise. Rear turn signal lights Rear side marker lights   Install the light unit. Align the tabs and push the light unit toward the front of the vehi- cle to install it.
  • Page 485 (bulb type), back-up lights (bulb type), rear turn signal lights (bulb type) and rear side marker lights (bulb type) consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced.
  • Page 486 6-3. Do-it-yourself maintenance WARNING ■ Replacing light bulbs ● Turn off the lights. Do not attempt to replace the bulb immediately after turning off the lights. The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands. When it is unavoidable to hold the glass portion, use and hold with a clean dry cloth to avoid getting moisture and oils on the bulb.
  • Page 487 When trouble arises 7-1. Essential information Emergency flashers ..486 If your vehicle has to be stopped in an emergency ...... 487 7-2. Steps to take in an emergency If your vehicle needs to be towed ......489 If you think something is wrong ......
  • Page 488: Essential Information Emergency Flashers

    7-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped on the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
  • Page 489: Emergency

    7-1. Essential information If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the follow- ing procedure: Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.
  • Page 490 7-1. Essential information WARNING ■ If the engine has to be turned off while driving ● Power assist for the brakes and steering wheel will be lost, making the brake pedal harder to depress and the steering wheel heavier to turn. Decelerate as much as possible before turning off the engine.
  • Page 491: Be Towed

    If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or commercial towing service, using a wheel-lift type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/ provincial and local laws.
  • Page 492 7-2. Steps to take in an emergency Using a flatbed truck If your vehicle is transported by a flatbed truck, it should be tied down at the locations shown in the illustration. Covers are installed to the tie-down holes. After transporting the vehi- cle, make sure to reinstall the cov- ers to the holes.
  • Page 493 7-2. Steps to take in an emergency Emergency towing procedure (vehicles with a towing eyelet) Take out the towing eyelet. (P. 513) Remove the eyelet cover using a flathead screwdriver. To protect the bodywork, place a rag between the screwdriver and the vehicle body as shown in the illustration.
  • Page 494 7-2. Steps to take in an emergency Vehicles without a smart key system: Enter the vehicle being towed and start the engine. If the engine does not start, turn the engine switch to the “ON” position. Vehicles with a smart key system: Enter the vehicle being towed and start the engine.
  • Page 495 7-2. Steps to take in an emergency WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When towing the vehicle Be sure to transport the vehicle with the front wheels raised or with all four wheels raised off the ground.
  • Page 496 7-2. Steps to take in an emergency NOTICE ■ To prevent damage to the vehicle when towing using a wheel-lift type truck ● Vehicles without a smart key system: Do not tow the vehicle from the rear when the engine switch is in the “LOCK” position or the key is removed. The steering lock mechanism is not strong enough to hold the front wheels straight.
  • Page 497: If You Think Something Is Wrong

    7-2. Steps to take in an emergency If you think something is wrong If you notice any of the following symptoms, your vehicle proba- bly needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms ● Fluid leaks under the vehicle.
  • Page 498: System

    7-2. Steps to take in an emergency Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
  • Page 499: On Or A Warning Buzzer Sounds

    • The brake fluid level is low; or (U.S.A.) • The brake system is malfunctioning  Immediately stop the vehicle in a safe place and con- tact your Toyota dealer. Continuing to drive the vehi- cle may be dangerous. (Canada) Malfunction indicator lamp Indicates a malfunction in: •...
  • Page 500 (Flashes) released, the system is operating normally. (Canada) Brake hold operated indicator Indicates a malfunction in the brake hold system  Have the vehicle inspected by your Toyota dealer (if equipped) immediately. (Flashes) Electric power steering system warning light (warning...
  • Page 501 Warning light/Details/Actions PCS warning light When the warning light flashes: Indicates a malfunction in the PCS (Pre-Collision System)  Have the vehicle inspected by your Toyota dealer immediately. When the warning light illuminates: Indicates that the PCS (Pre-Collision System) is temporar- ily unavailable, possibly due to either of the following: •...
  • Page 502 7-2. Steps to take in an emergency Warning light Warning light/Details/Actions Low fuel level warning light Vehicles with no-folding type rear seats  Indicates that remaining fuel is approximately 2.2 gal. (8.3 L, 1.6 Imp. gal.) Vehicles with folding type rear seats ...
  • Page 503 7-2. Steps to take in an emergency : Parking brake engaged warning buzzer: A buzzer will sound if the vehicle is driven at a speed of approximately 3 mph (5 km/h) or more. : Driver’s seat belt buzzer: Vehicles without a smart key system: The driver’s seat belt buzzer sounds to alert the driver that his or her seat belt is not fastened.
  • Page 504 Is the fuel tank cap loose? If it is, tighten it securely. The light will go off after several driving trips. If the light does not go off even after several trips, contact your Toyota dealer as soon as possible. ■...
  • Page 505 (P. 446) If the warning light does not turn off several minutes after the initialization has been performed, have the vehicle inspected by your Toyota dealer immediately. If the tire pressure warning light blinks for 1 minute then stays on ...
  • Page 506 ■ If both the ABS and the brake system warning lights remain on Stop your vehicle in a safe place immediately and contact your Toyota dealer. The vehicle will become extremely unstable during braking, and the ABS system may fail, which could cause an accident resulting in death or serious injury.
  • Page 507 7-2. Steps to take in an emergency WARNING ■ Maintenance of the tires Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label).
  • Page 508 7-2. Steps to take in an emergency NOTICE ■ To ensure the tire pressure warning system operates properly Do not install tires with different specifications or makers, as the tire pressure warning system may not operate properly.
  • Page 509: Displayed

    Multi-information display Handling method Follow the instructions of the message on the multi-information display. If any of the warning messages are shown again after the appropriate actions have been performed, contact your Toyota dealer.
  • Page 510 Messages and warnings The warning lights and warning buzzers operate as follows depending on the content of the message. If a message indicates the need for inspection by a dealer, have the vehicle inspected by your Toyota dealer immediately. System...
  • Page 511 ● If the following messages are shown, there may be a malfunction. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Continuing to drive the vehicle may be dangerous. • “Low Braking Power Stop in a Safe Place See Owner’s Manual”...
  • Page 512 If this message is displayed but you have not had a new electronic key regis- tered, ask your Toyota dealer to check if an unknown electronic key (other than those in your possession) has been registered.
  • Page 513 P. 503 NOTICE ■ It “High Power Consumption Power to Climate Temporarily Limited” is frequently shown There is a possible malfunction relating to the charging system or the bat- tery may be deteriorating. Have the vehicle inspected by your Toyota dealer.
  • Page 514 7-2. Steps to take in an emergency If you have a flat tire Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: P. 444 WARNING ■ If you have a flat tire Do not continue driving with a flat tire.
  • Page 515 7-2. Steps to take in an emergency Location of the spare tire, jack and tools Luggage floor cover Spare tire Wheel nut wrench Towing eyelet (if equipped) Jack Jack handle...
  • Page 516 7-2. Steps to take in an emergency WARNING ■ Using the tire jack Observe the following precautions. Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. ● Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains.
  • Page 517 7-2. Steps to take in an emergency Taking out the jack Lift up the hook of the luggage floor cover on the trunk floor. Secure the luggage floor cover using the hook provided. Remove the jack. Taking out the spare tire Lift up the hook of the luggage floor cover on the trunk floor.
  • Page 518 7-2. Steps to take in an emergency Secure the luggage floor cover using the hook provided. Remove the tool tray. Loosen the center fastener that secures the spare tire. When taking out or stowing the spare tire, make sure to firmly hold opposite end of the tire.
  • Page 519 7-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Rear Right-hand side In front of the front left-hand side tire...
  • Page 520 7-2. Steps to take in an emergency Turn the tire jack portion “A” by hand until the notch of the jack is in contact with the jack point. To prevent damage to the vehicle when using the jack, position the jack in the correct location.
  • Page 521 • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. • When installing the wheel nuts, be sure to install them with the...
  • Page 522 7-2. Steps to take in an emergency Installing the spare tire Remove any dirt or foreign mat- ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.
  • Page 523 7-2. Steps to take in an emergency Firmly tighten each wheel nut two or three times in the order shown in the illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) Stow the flat tire, tire jack and all tools. ■...
  • Page 524 • Cruise control (ICS) • Dynamic radar cruise control • Rear view monitor system • Dynamic radar cruise control • Toyota parking assist monitor with full-speed range • Panoramic view monitor • LDA (Lane Departure Alert with • Navigation system...
  • Page 525 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and...
  • Page 526: If The Engine Will Not Start

    7-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting proce- dures are being followed (P. 198, 200), consider each of the fol- lowing points: The engine will not start even though the starter motor operates normally.
  • Page 527 ● There may be a malfunction in the steering lock system (vehicles with a smart key system). Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function (vehicles with a smart key system)
  • Page 528: If The Electronic Key Does Not Operate Properly

    Turning the key rearward unlocks the driver's door. Turning the key once again unlocks the other doors. Opens the windows and the moon roof or panoramic moon roof (turn and hold) : If equipped : This setting must be customized at your Toyota dealer.
  • Page 529 ACCESSORY mode. Firmly depress the brake pedal and check that is displayed on the multi-information display. Press the engine switch shortly and firmly. In the event that the engine still cannot be started, contact your Toyota dealer.
  • Page 530 7-2. Steps to take in an emergency ■ Stopping the engine Shift the shift lever to P and press the engine switch as you normally do when stopping the engine. ■ Replacing the key battery As the above procedure is a temporary measure, it is recommended that the electronic key battery be replaced immediately when the battery is depleted.
  • Page 531: If The Vehicle Battery Is Discharged

    The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can also call your Toyota dealer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below.
  • Page 532 7-2. Steps to take in an emergency Connect the jumper cables according to the following procedure: 2.5 L 4-cylinder (A25A-FKS) engine  3.5 L V6 (2GR-FKS) engine  Connect a positive jumper cable clamp to the positive (+) battery terminal on your vehicle. Connect the clamp on the other end of the positive cable to the positive (+) battery terminal on the second vehicle.
  • Page 533 Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order from which they were connected. Once the engine starts, have the vehicle inspected at your Toyota dealer as soon as possible. ■ Starting the engine when the battery is discharged The engine cannot be started by push-starting.
  • Page 534 • If the 20 hour rate capacity is low, even if the time period where the vehi- cle is not used is a short time, the battery may discharge and the engine may not be able to start. ● For details, consult your Toyota dealer.
  • Page 535 7-2. Steps to take in an emergency WARNING ■ When removing the battery terminals Always remove the negative (-) terminal first. If the positive (+) terminal con- tacts any metal in the surrounding area when the positive (+) terminal is removed, a spark may occur, leading to a fire in addition to electrical shocks and death or serious injury.
  • Page 536: If Your Vehicle Overheats

    If you do not see steam: Carefully lift the hood. After the engine has cooled down sufficiently, inspect the hoses and radiator core (radia- tor) for any leaks. Radiator Cooling fan If a large amount of coolant leaks, immediately contact your Toyota dealer.
  • Page 537 7-2. Steps to take in an emergency The coolant level is satisfactory if it is between the “F” and “L” lines on the reservoir. Reservoir “F” line “L” line Radiator cap 2.5 L 4-cylinder (A25A-FKS) 3.5 L V6 (2GR-FKS) engine ...
  • Page 538 (The fan may not operate in freezing tem- peratures.) If the fan is not operating: Stop the engine immediately and contact your Toyota dealer. If the fan is operating: Have the vehicle inspected at the nearest Toyota dealer.
  • Page 539: Stuck

    7-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: Stop the engine. Set the parking brake and shift the shift lever to P. Remove the mud, snow or sand from around the front wheels.
  • Page 540 7-2. Steps to take in an emergency ■ When it is difficult to free the vehicle Press to turn off TRAC. WARNING ■ When attempting to free a stuck vehicle If you choose to push the vehicle back and forth to free it, make sure the surrounding area is clear to avoid striking other vehicles, objects or people.
  • Page 541 Vehicle specifications 8-1. Specifications Maintenance data (fuel, oil level, etc.) ..540 Fuel information ....551 Tire information ....554 8-2. Customization Customizable features ..567 8-3. Items to initialize Items to initialize ....575...
  • Page 542 8-1.Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights 192.1 in. (4880 mm) Overall length 192.7 in. (4895 mm) Overall width 72.4 in. (1840 mm) Overall height 56.9 in. (1445 mm) Wheelbase 111.2 in. (2825 mm) 63.0 in. (1600 mm) Front 62.6 in.
  • Page 543 The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel.
  • Page 544: Engine Number

    8-1. Specifications Engine number ■ The engine number is stamped on the engine block as shown. 2.5 L 4-cylinder (A25A-FKS) 3.5 L V6 (2GR-FKS) engine   engine Engine Model A25A-FKS 2GR-FKS 4-cylinder in line, 6-cylinder V type, Type 4-cycle, gasoline 4-cycle, gasoline 3.44 ...
  • Page 545: Lubrication System

    ■ 2.5 L 4-cylinder (A25A-FKS) engine  “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to sat- isfy the following grade and viscosity. Oil grade: API SN/RC multigrade engine oil...
  • Page 546 3.5 L V6 (2GR-FKS) engine  “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to sat- isfy the following grade and viscosity. Oil grade: ILSAC GF-5 multigrade engine oil...
  • Page 547: Cooling System

    3.5 L V6 (2GR-FKS) engine  9.0 qt. (8.5 L, 7.5 Imp. qt.) Use either of the following: • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based Coolant type non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
  • Page 548: Electrical System

    If replacement is necessary, contact your Toyota dealer. NOTICE ■ Transmission fluid type Using transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of the transmission accompanied by vibration and, ultimately, damage to the vehicle’s transmission.
  • Page 549 8-1. Specifications Brakes Pedal clearance 3.2 in. (81 mm) 0.04  0.24 in. (1  6 mm) Pedal free play Brake pad wear limit 0.04 in. (1.0 mm) Parking brake lining wear limit 0.04 in. (1.0 mm) (pedal type) Parking brake pedal travel ...
  • Page 550 8-1. Specifications Type B  Tire size 215/55R17 94V, T155/70D17 110M Driving under normal conditions Front: 35 psi (240 kPa, 2.4 kgf/cm or bar) Rear: 35 psi (240 kPa, 2.4 kgf/cm or bar) Spare: Tire inflation pressure 60 psi (420 kPa, 4.2 kgf/cm or bar) (Recommended cold tire Driving at high speeds (above 100 mph...
  • Page 551 8-1. Specifications Type D  Tire size 235/45R18 94Y, T155/70D17 110M Driving under normal conditions Front: 35 psi (240 kPa, 2.4 kgf/cm or bar) Rear: 35 psi (240 kPa, 2.4 kgf/cm or bar) Spare: Tire inflation pressure 60 psi (420 kPa, 4.2 kgf/cm or bar) (Recommended cold tire Driving at high speeds (above 100 mph...
  • Page 552 8-1. Specifications Light bulbs Light bulbs Bulb No. Type Front side marker lights (bulb type) Front turn signal/ parking lights 7444NA 28/8 (bulb type) Exterior Rear turn signal lights WY21W (bulb type) Rear side maker lights (bulb type) Back-up lights (bulb type) ...
  • Page 553: Fuel Information

    In very few cases, driveability problems may be caused by the brand of gaso- line you are using. If driveability problems persist, try changing the brand of gasoline. If this does not correct the problem, consult your Toyota dealer. ■...
  • Page 554 Non-recommendation of the use of gasoline containing MMT Some gasoline contains an octane enhancing additive called MMT (Methylcy- clopentadienyl Manganese Tricarbonyl). Toyota does not recommend the use of gasoline that contains MMT. If fuel containing MMT is used, your emission control system may be adversely affected.
  • Page 555 8-1. Specifications NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used, the engine will be damaged. ● Do not use leaded gasoline. Leaded gasoline can cause damage to your vehicle’s three-way catalytic converters causing the emission control system to malfunction.
  • Page 556: Tire Information

    8-1. Specifications Tire information Typical tire symbols Full-size tire  Compact spare tire ...
  • Page 557 8-1. Specifications Tire size (P. 557) Summer tires or all season tires (P. 451) An all season tire has “M+S” on the sidewall. A tire not marked “M+S” is a summer tire. TUBELESS or TUBE TYPE A tubeless tire does not have a tube and air is directly put into the tire. A tube type tire has a tube inside the tire and the tube maintains the air pressure.
  • Page 558 8-1. Specifications Typical DOT and Tire Identification Number (TIN) Type A Type B   DOT symbol Tire Identification Number (TIN) Tire manufacturer’s identification mark Tire size code Manufacturer’s optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year Manufacturer’s code : The DOT symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards.
  • Page 559 8-1. Specifications Tire size Typical tire size information ■ The illustration indicates typical tire size. Tire use (P = Passenger car [some- times omitted], T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 digits) Speed symbol (alphabet with one letter)
  • Page 560 8-1. Specifications Tire section names Bead Sidewall Shoulder Tread Belt Inner liner Reinforcing rubber Carcass Rim lines Bead wires Chafer...
  • Page 561 U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. DOT quality grades ■...
  • Page 562 8-1. Specifications Temperature A, B, C ■ The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissi- pate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
  • Page 563 8-1. Specifications Glossary of tire terminology Tire related term Meaning Tire pressure when the vehicle has been Cold tire inflation pres- parked for three hours or more, or has not sure been driven more than 1 mile or 1.5 km under that condition The maximum cold inflated pressure to which Maximum...
  • Page 564 8-1. Specifications Tire related term Meaning The combined weight of installed regular pro- duction options weighing over 5 lb. (2.3 kg) in excess of the standard items which they Production options replace, not previously considered in curb weight weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim A metal support for a tire or a tire and tube...
  • Page 565 8-1. Specifications Tire related term Meaning A pneumatic tire in which the ply cords that extend to the beads are laid at alternate Bias ply tire angles substantially less than 90 degrees to the centerline of the tread The tire structure, except tread and sidewall Carcass rubber which, when inflated, bears the load The breaking away of pieces of the tread or...
  • Page 566 8-1. Specifications Tire related term Meaning A tire designated by its manufacturer as pri- Light truck (LT) tire marily intended for use on lightweight trucks or multipurpose passenger vehicles The maximum load that a tire is rated to carry Load rating for a given inflation pressure The load rating for a tire at the maximum per- Maximum load rating...
  • Page 567 8-1. Specifications Tire related term Meaning The linear distance between the exteriors of the sidewalls of an inflated tire, excluding ele- Section width vations due to labeling, decoration, or protec- tive bands That portion of a tire between the tread and Sidewall bead The parting of the rubber compound from the...
  • Page 568 8-1. Specifications Designated seating Occupant distribution Vehicle normal load, capacity, Number of in a normally loaded Number of occupants occupants vehicle 2 through 4 2 in front 2 in front, 1 in second 5 through 10 seat 2 in front, 1 in second 11 through 15 seat, 1 in third seat, 1 in fourth seat...
  • Page 569: Customizable Features

    The settings of these fea- tures can be changed using the multi-information display, on the audio system screen, or at your Toyota dealer. Customizing vehicle features When customizing vehicle features, ensure that the vehicle is parked in a safe place with the shift lever in P and the parking brake set.
  • Page 570 Customizable features Some function settings are changed simultaneously with other func- tions being customized. Contact your Toyota dealer for further details. Settings that can be changed on the audio system screen Settings that can be changed by your Toyota dealer Definition of symbols: O = Available, —...
  • Page 571 8-2. Customization Door lock (P. 135, 144, 526) ■ Function Default setting Customized setting Driver’s door unlocked in one All doors unlocked in Unlocking using a key step, all doors — O one step. unlocked in two steps Shift position Automatic door lock linked door lock- Speed linked door...
  • Page 572 8-2. Customization Smart key system (P. 135, 144, 149) ■ Function Default setting Customized setting Smart key system — O Smart door unlocking Driver’s door All the doors Time elapsed before unlocking all the door when gripping and hold- 2 seconds —...
  • Page 573 8-2. Customization Power windows, and moon roof or panoramic moon roof ■ (P. 170, 174, 178) Function Default setting Customized setting Key linked operation — O Wireless remote control On (open only) — O linked operation Wireless remote control linked operation signal —...
  • Page 574 8-2. Customization Lights (P. 219) ■ Function Default setting Customized setting Daytime running light system (except Canada) Windshield wiper linked — O headlight illumination Intuitive parking assist (P. 314) ■ Function Default setting Customized setting Detection distance of the Near —...
  • Page 575: Automatic Air Conditioning System

    8-2. Customization Automatic air conditioning system (P. 355, 361) ■ Function Default setting Customized setting A/C auto switch opera- Auto Manual tion : If equipped Illumination (P. 370) ■ Function Default setting Customized setting Time elapsed before 15 seconds 7.5 seconds lights turn off 30 seconds Vehicles without smart...
  • Page 576 8-2. Customization WARNING ■ During customization As the engine needs to be running during customization, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle.
  • Page 577: Items To Initialize

    8-3. Items to initialize Items to initialize The following items must be initialized for normal system opera- tion after such cases as the battery being reconnected, or main- tenance being performed on the vehicle: Item When to initialize Reference Message indicating mainte- •...
  • Page 578 8-3. Items to initialize...
  • Page 579: For Owners

    For owners Reporting safety defects for U.S. owners......578 Seat belt instructions for Canadian owners (in French) ....... 579 SRS airbag instructions for Canadian owners (in French) ....... 581...
  • Page 580: Reporting Safety Defects For U.s. Owners

    National Highway Traffic Safety Administration (NHTSA) in addi- tion to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800- 331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
  • Page 581 Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation correcte des ceintures de sécurité...
  • Page 582 AVERTISSEMENT ■ Détérioration et usure des ceintures de sécurité Inspectez le système de ceintures de sécurité régulièrement. Contrôlez l'absence de coupures, d'effilochages et de pièces desserrées. N'utilisez pas une ceinture de sécurité endommagée avant qu'elle ne soit remplacée. Une ceinture de sécurité endommagée ne permet pas de protéger un occu- pant de blessures graves ou mortelles.
  • Page 583 SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc- tions in English. ◆...
  • Page 584 ◆ Coussins gonflables latéraux et rideaux SRS Coussins gonflables latéraux avant SRS Participent à la protection du torse des occupants de siège avant Coussins gonflables latéraux arrière SRS Participent à la protection du torse des occupants des sièges latéraux arrière Coussins gonflables rideaux SRS ●...
  • Page 585 Composants du système de coussins gonflables SRS Capteurs d'impact avant Témoins indicateurs “AIR- BAG ON” et “AIRBAG OFF” Système de classification de l'occupant du siège passager Témoin d'avertissement SRS avant (ECU et capteurs) Contact de boucle de ceinture Coussins gonflables sécurité...
  • Page 586 Votre véhicule est équipé de COUSSINS GONFLABLES INTELLI- GENTS conçus selon les normes de sécurité américaines applicables aux véhicules à moteur (FMVSS208). L'ensemble de capteurs de coussins gonflables (ECU) régule le déploiement des coussins gon- flables sur la base des informations qu'il reçoit des capteurs, etc., indi- qués ci-dessus dans le schéma illustrant les composants du système.
  • Page 587 AVERTISSEMENT ■ Précautions relatives aux coussins gonflables SRS Respectez les précautions suivantes concernant les coussins gonflables SRS. Le non-respect de ces précautions peut occasionner des blessures graves, voire mortelles. ● Le conducteur et tous les passagers du véhicule doivent porter correcte- ment leur ceinture de sécurité.
  • Page 588 Un nourrisson ou un enfant trop petit pour utiliser une ceinture de sécurité doit être correctement attaché au moyen d'un siège de sécurité enfant. Toyota recommande vivement d'installer tous les nour- rissons et enfants sur les sièges arrière du véhicule et de prévoir pour eux des systèmes de retenue adaptés.
  • Page 589 AVERTISSEMENT ■ Précautions relatives aux coussins gonflables SRS ● Ne vous asseyez pas sur le bord du siège et ne vous appuyez pas contre la planche de bord. ● Ne laissez pas un enfant rester debout devant le coussin gonflable passager avant SRS ou s'asseoir sur les genoux du passager avant.
  • Page 590 AVERTISSEMENT ■ Précautions relatives aux coussins gonflables SRS ● Ne fixez rien et ne posez rien sur des emplacements tels que la planche de bord, la garniture du volant et la partie inférieure du tableau de bord. Ces éléments peuvent se transformer en projectiles lorsque les coussins gon- flables conducteur, passager avant et genoux SRS se déploient.
  • Page 591 Si les parties renfermant les coussins gonflables SRS, comme les garni- tures du volant et des montants avant et arrière, sont endommagées ou craquelées, faites-les remplacer par votre concessionnaire Toyota. ● Ne placez rien sur le siège du passager avant, comme un coussin par exemple.
  • Page 592 SRS Ne mettez pas votre véhicule au rebut et ne procédez à aucune des modifi- cations suivantes sans consulter votre concessionnaire Toyota. Les cous- sins gonflables SRS peuvent ne pas fonctionner correctement ou se déployer (se gonfler) accidentellement, provoquant la mort ou de graves blessures.
  • Page 593: Index

    Alphabetical index ..... 596 For information regarding the equipment listed below, refer to “NAV- IGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL”. • Navigation system • Audio system • Rear view monitor system • Toyota parking assist monitor • Panoramic view monitor • Connected service...
  • Page 594 You lose your keys ● If you lose your keys or mechanical keys, new genuine keys or mechanical keys can be made by your Toyota dealer. (P. 130) ● If you lose your keys or electronic keys, the risk of vehicle theft increases significantly.
  • Page 595 What to do if... (Troubleshooting) If you think something is wrong The engine does not start (vehicles without a smart key system) ● Is the shift lever in P? (P. 198) ● Is the steering wheel unlocked? (P. 198) ● Is the battery discharged? (P.
  • Page 596 What to do if... (Troubleshooting) The steering wheel cannot be turned after the engine is stopped ● Vehicles without a smart key system: It is locked to prevent theft of the vehicle if the key is pulled from the engine switch.
  • Page 597 What to do if... (Troubleshooting) An alarm is activated and the horn sounds (vehicles with an alarm) ● Did anyone inside the vehicle open a door during setting the alarm? The sensor detects it and the alarm sounds. (P. 74) ●...
  • Page 598: Alphabetical Index

    Alphabetical index Alphabetical index Side airbag precautions..35 Side and curtain shield AAC disc airbags operating A/C ......350, 355, 361 conditions ......41 Air conditioning filter ..... 464 Side and curtain shield Automatic air airbags precautions....35 conditioning SRS airbag instructions for system ......
  • Page 599 Alphabetical index Back-up lights Care Replacing light bulb ..478, 483 Aluminum wheels ....415 Wattage ........ 550 Exterior ......... 414 Battery ........440 Interior ........417 Battery checking ....440 Seat belts......418 If the battery is discharged..529 Cargo capacity......
  • Page 600 Alphabetical index Child safety ........ 51 Cooling system......437 Airbag precautions....35 Engine overheating....534 Battery precautions..441, 533 Cruise control Child restraint system ..... 52 Cruise control ....... 289 How your child should wear Dynamic radar cruise the seat belt......28 control ........
  • Page 601 Alphabetical index Door lock Doors ........135 Eco drive mode......343 Key........137 Eco Driving Indicator ..97, 111 Smart key system ....135 Eco-friendly driving Wireless remote control ..136 information ......102 Doors ........135 EDR (Event data recorder)..8 Automatic door locking Electric Power Steering and unlocking systems ..
  • Page 602 Alphabetical index Engine ACCESSORY mode ..... 201 Flat tire ........512 Compartment ......432 Floor mats ........22 Engine switch....198, 200 Fluid Hood ........430 Automatic transaxle ....546 How to start the Brake ........547 engine......198, 200 Washer .........
  • Page 603 Alphabetical index Garage door opener ....395 I/M test ........427 Gauges ........84 ICS (Intelligent Clearance Glove box ......... 374 Sonar)........322 Grocery bag hooks....379 Indicator........79 Warning light......499 Warning messages....333 Identification Hands-free system Engine ........542 (for cellular phone) Vehicle........
  • Page 604 Alphabetical index Jack Lane Departure Alert with Positioning the jack....431 steering control (LDA) ..253 Vehicle-equipped jack... 513 Language (multi- Jack handle ......513 information display)..95, 109 Jam protection function LATCH anchors ......65 Moon roof......175 LDA (Lane Departure Alert Panoramic moon roof ...
  • Page 605 Alphabetical index Mobile Assistant Moon roof......... 174 Maintenance Door lock linked moon roof Do-it-yourself maintenance... 428 operation ......175 General maintenance ... 423 Jam protection function ..175 Maintenance data ....540 Operation......174 Maintenance MP3 disc requirements ...... 420 Multi-information Resetting the message display........
  • Page 606 Alphabetical index Odometer........84 Paddle shift switches....207 Panic mode ......129 Engine oil ......543 Panoramic moon roof ..... 178 Opener Jam protection function ..179 Fuel filler door ....... 233 Operation......178 Hood ........430 Panoramic view monitor Trunk........
  • Page 607 Alphabetical index Refueling ........231 Capacity........ 542 Radar cruise control (dynamic Fuel types ......542 radar cruise control) ..... 276 Opening the fuel tank cap..233 Radar cruise control When the fuel filler door (dynamic radar cruise cannot be opened ....234 control with full-speed Replacing range) ........
  • Page 608 Alphabetical index Seats......... 158 Adjustment......158 Safety Connect ......402 Adjustment precautions ..159 Seat belt reminder light... 500 Child seats/child restraint Seat belts........26 system installation....52 Adjusting the seat belt .... 27 Cleaning ....... 417 Automatic Locking Folding down the rear Retractor.......
  • Page 609 Alphabetical index Side mirrors ......168 Switches Adjusting and folding .... 168 Audio remote control BSM (Blind Spot Monitor) ..300 switches Side turn signal lights Automatic High Beam Replacing light bulbs..... 483 switch ......... 223 Turn signal lever ....211 Brake hold switch ....
  • Page 610 Alphabetical index Seat heater switches .... 369 Tire pressure warning system “SOS” button......402 Initializing......446 Talk switch Installing tire pressure Trunk opener switch ..... 144 warning valve and Vehicle-to-vehicle transmitters ......446 distance button ... 263, 276 Registering ID codes .... 448 VSC OFF switch ....
  • Page 611 Alphabetical index Toyota parking assist monitor Toyota Safety Sense P .... 235 USB charging port....382 Automatic High Beam ... 223 USB memory Dynamic radar cruise USB port control......... 276 Dynamic radar cruise control with full-speed range ..263 Vanity lights ......380 LDA (Lane Departure Alert Wattage ........
  • Page 612 Alphabetical index Warning lights ......79 ABS ........497 Warning buzzers Brake hold operated Approach warning..271, 283 indicator......498 Brake system ......497 Brake system......497 Downshifting ......208 Electric power steering ..498 Electric power steering ICS OFF indicator....499 system ........
  • Page 613 Alphabetical index Washing and waxing ....414 Weight........540 Cargo capacity...... 195 Load limits......195 Vehicle capacity weight ..540 Wheels ........462 Replacing......462 Size........547 Window glasses....... 170 Window lock switch ....170 Windows........170 Power windows..... 170 Rear window defogger .....
  • Page 614: Gas Station Information

     16.0 gal. (60.6 L, 13.3 Imp. gal.) Fuel type P. 542, 551 Cold tire inflation P. 547 pressure Engine oil capacity (Drain and refill — P. 543 reference) “Toyota Genuine Motor Oil” or equivalent Engine oil type P. 543...

This manual is also suitable for:

Camry 2023

Table of Contents

Save PDF