Adjusting the set speed
To change the set speed, operate the "+ RES" or "- SET" switch until
the desired set speed is displayed.
Increases the speed
1
(Except when the vehicle has been
stopped by system control in vehi-
cle-to-vehicle
mode)
Decreases the speed
2
Fine adjustment: Press the switch.
Large adjustment: Press and hold
the switch to change the speed,
and release when the desired
speed is reached.
In the vehicle-to-vehicle distance control mode, the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph) each time the switch is pressed
Large adjustment: Increases or decreases in 5 km/h (3.1 mph) increments
for as long as the switch is held
In the constant speed control mode (P. 237), the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph) each time the switch is pressed
Large adjustment: The speed will continue to change while the switch is
held.
AVALON_GE
AVALON_OM_General_OM41476E
4-5. Using the driving support systems
distance
control
233
4
Need help?
Do you have a question about the Avalon and is the answer not in the manual?