Turning The Bsm Function/Rcta Function On/Off; The Outside Rear View Mirror Indicators Visibility; Rcta Buzzer Hearing; When There Is A Malfunction In The Blind Spot Monitor - Toyota Camry 2018 Owner's Manual

Audio system screen (RCTA function only)
4
If a vehicle approaching from the right or left at the rear of the vehicle is
detected, the RCTA icon (P. 306) for the detected side will be displayed.
buzzer (
5 RCTA
When a vehicle approaching from the right or left rear of the vehicle is
detected, a buzzer sounds from behind the rear seat.

Turning the BSM function/RCTA function on/off

Vehicles with 4.2-inch multi-information display

Press
1
/
Press
2 /
Press
3
Each time
Vehicles with 7-inch multi-information display

Press
1
/
Press
2
/
Press
3
Each time
■

The outside rear view mirror indicators visibility

When under strong sunlight, the outside rear view mirror indicator may be dif-
ficult to see.
■

RCTA buzzer hearing

RCTA function may be difficult to hear over loud noises such as high audio
volume.
■

When there is a malfunction in the Blind Spot Monitor

If a system malfunction is detected due to any of the following reasons, a
warning message will be displayed:
●
There is a malfunction with the sensors
●
The sensors have become dirty
●
The outside temperature is extremely high or low
●
The sensor voltage has become abnormal
4-5. Using the driving support systems
function only)
RCTA
of the meter control switches, select
of the meter control switches, select
of the meter control switch.
is pressed, the function changes on/off.
of the meter control switches, select
of the meter control switched, select
of the meter control switch.
is pressed, the function changes on/off.
301
.
or .
.
or .
4