Turn signal lever
Operating instructions
Right turn
1
Lane change to the right (move
2
the lever partway and release
it)
The right hand signals will flash 3
times.
Lane change to the left (move
3
the lever partway and release
it)
The left hand signals will flash 3
times.
Left turn
4
■
Turn signals can be operated when
Vehicles without a smart key system:
The engine switch is in the "ON" position.
Vehicles with a smart key system:
The engine switch is in IGNITION ON mode.
■
If the indicator flashes faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned
out.
■
If the turn signals stop flashing before a lane change has been per-
formed
Operate the lever again.
■
To discontinue flashing of the turn signals during a lane change
Operate the lever in the opposite direction.
4-2. Driving procedures
211
4