Changes In The Vehicle Posture - Toyota Camry 2018 Owner's Manual

●
Other ultrasonic waves sources
• When vehicle horns, vehicle detectors, motorcycle engines, air brakes of
large vehicles, the clearance sonar of other vehicles or other devices
which produce ultrasonic waves are near the vehicle
• If a sticker or an electronic component, such as a backlit license plate
(especially fluorescent type), fog lights, a fender pole or wireless antenna
is installed near a sensor
●

Changes in the vehicle posture

• If the vehicle is significantly tilted
• If the front of the vehicle is raised or lowered due to the carried load
• If the orientation of a sensor has been changed due to a collision or other
impact
■
If a battery terminal has been disconnected and reconnected
The system needs to be initialized.
To initialize the system, drive the vehicle straight ahead for 5 seconds or more
at a speed of approximately 22 mph (35 km/h) or more.
■
If "ICS Unavailable" is displayed on the multi-information display and
the ICS OFF indicator is flashing
●
A sensor may be covered with ice, snow, dirt, etc. Remove the ice, snow,
dirt, etc., from the sensor to return the system to normal.
Also, due to ice forming on a sensor at low temperatures, a warning mes-
sage may be displayed or the sensor may not be able to detect an object.
Once the ice melts, the system will return to normal.
●
If this message continues to be displayed even after cleaning the sensor, or
is displayed even though the sensor is clean, have the vehicle inspected by
your Toyota dealer.
●
Initialization may not have been performed after a battery terminal was dis-
connected and reconnected. Initialize the system. (P. 333)
■
If "ICS Malfunction Visit Your Dealer" is displayed on the multi-informa-
tion display and the ICS OFF indicator is flashing
The system may be malfunctioning. Have the vehicle inspected by your
Toyota dealer.
4-5. Using the driving support systems
333
4