Erasing The Entire Homelink Memory (All Three Codes); Codes Stored In The Homelink Memory; Before Programming - Toyota Camry 2018 Owner's Manual

Hide thumbs Also See for Camry 2018:

Table of Contents

5-4. Other interior features

Erasing the entire HomeLink

Press and hold the 2 outside but-

tons for 10 seconds until the

changes from continuously lit

orange to rapidly flashing green.

If you sell your vehicle, be sure to

erase the programs stored in the

Codes stored in the HomeLink

The registered codes are not erased even if the battery cable is discon-

If learning failed when registering a different code to a HomeLink

that already has a code registered to it, the already registered code will not

Install a new battery in the transmitter.

The battery side of the transmitter must be pointed away from the

Certification for the garage door opener

For vehicles sold in the U.S.A.

For vehicles sold in Canada

memory (all three codes)

Troubleshooting