Vehicle Settings - Toyota Camry 2018 Owner's Manual

94
2. Instrument cluster

Vehicle settings

■
Item
BSM (Blind Spot Monitor) (if equipped) (P. 300)
Outside rear view
mirror indicator
brightness
RCTA (Rear Cross Traffic Alert) (if equipped) (P. 300)
RCTA buzzer vol-
ume
TPWS (Tire pressure warning system) (P. 445)
Set pressure (tire pressure warning sys-
tem initialization)
Change wheel (change the tire pres-
sure warning system sensor ID code
set)
(vehicles without a tire inflation pres-
sure display function)
Change wheel (register tire pressure
warning system sensor ID codes)
(vehicles with a tire inflation pressure
display function)
Settings
Bright
Dim
1 (Low)
2 (Medium)
3 (Loud)
Details
Select to change the brightness
of the outside rear view mirror
indicators.
Select to change the volume of
the RCTA buzzer.
Select to initialize the tire pres-
sure warning system. To per-
form initialization, press and hold
the switch.
Before performing initialization,
make sure to adjust the inflation
pressure of each tire to the spec-
ified level. (P. 446)
Select to change the tire pres-
sure warning system sensor ID
code set.
To enable this function, a second
set of tire pressure warning sys-
tem sensor ID codes must be
registered by a Toyota dealer.
For information regarding chang-
ing the registered ID code set,
contact your Toyota dealer.
(P. 448)
Select to register the ID codes of
the tire pressure sensors to the
tire pressure warning system.
To register the ID codes, press
and hold the
(P. 448)
switch.