When Registering Id Codes; Canceling Id Code Registration - Toyota Camry 2018 Owner's Manual

454
6-3. Do-it-yourself maintenance
■ When registering ID codes (vehicles with a tire inflation pressure dis-
play function)
● Before performing ID code registration, make sure that no wheels with
tire pressure warning valve and transmitters installed are near the vehi-
cle.
● Make sure to initialize the tire pressure warning system after registering
the ID codes. If the system is initialized before registering the ID codes,
the initialized values will be invalid.
● As the tires will be warm when registration is completed, make sure to
allow the tires to cool before performing initialization.
■ Canceling ID code registration (vehicles with a tire inflation pressure
display function)
● To cancel ID code registration after it has been started, turn the engine
switch off before driving the vehicle.
If the vehicle is driven after ID code registration is started, to cancel reg-
istration, perform the ID code registration start procedure again and turn
the engine switch off before driving.
● If ID code registration has been canceled, the tire pressure warning light
will blink for approximately 1 minute when the engine switch is turned to
the "ON" position (vehicles without a smart key system) or IGNITION
ON mode (vehicles with a smart key system) and then illuminate. The
tire pressure warning system will be operational when the tire pressure
warning light turns off.
● If the warning light does not turn off even after several minutes have
elapsed, ID code registration may not have been cancelled correctly. To
cancel registration, perform the ID code registration start procedure
again and then turn the engine switch off before driving.