Page 1 SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Overview of instruments and controls Instrument panel overview ........Instrument cluster overview .
Page 2: Instrument Panel Overview
Instrument panel overview DView A (coupe) 1. Side defroster outlets 2. Side vents 3. Instrument cluster 4. Center vents 5. Personal lights 6. Electric moon roof switch 7. Garage door opener 8. Auxiliary box 9. Power door lock switches 10. Power window switches 11.
Page 3 DView A (convertible) 1. Side defroster outlets 2. Side vents 3. Instrument cluster 4. Garage door opener 5. Convertible top latch handles 6. Center vents 7. Personal lights 8. Power door lock switches 9. Power window switches 10. Glove box 11.
Page 4 DView B (with manual air conditioning controls) 1. Headlight, turn signal and front fog light switches 2. Wiper and washer switches 3. Multi−information displays 4. Front passenger’s occupant classification indicator light/front passenger seat belt reminder light 5. Emergency flasher switch 6.
Page 5 DView B (with automatic air conditioning controls) 1. Headlight, turn signal and front fog light switches 2. Wiper and washer switches 3. Multi−information displays 4. Front passenger’s occupant classification indicator light/front passenger seat belt reminder light 5. Emergency flasher switch 6.
Page 6 Steering switches overview 1. Audio remote control switches 2. Telephone switch 3. Multi−information display control switch 4. Speech command switch 5. Cruise control switch...
Page 7: Instrument Cluster Overview
Instrument cluster overview 1. Tachometer 4. Engine coolant temperature gauge 7. Automatic transmission shift position indicator lights 2. Service reminder indicators and 5. Fuel gauge indicator lights 8. Odometer and two trip meters 6. Automatic transmission shift range 3. Speedometer position display 9.
Page 8: Table Of Contents
Indicator symbols on the instrument panel Brake system warning light Anti−lock brake system warning light Driver’s seat belt reminder light Open door warning light SRS warning light Front passenger’s seat belt reminder light Tire pressure warning light Charging system warning light Low windshield washer fluid level warning light Vehicle stability control system/traction control Malfunction indicator lamp...
Page 9 : For details, see “Service reminder indicators and warning buzzers” on page 133 in Section 1−6. Front passenger occupant classification indicator : If this light flashes, see “Cruise control” on page 162 in Sec- light tion 1−7. Headlight indicator light Tail light indicator light Turn signal indicator lights Headlight high beam indicator light...
Page 11 SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Keys and Doors Keys ............Engine immobilizer system .
Page 12: Keys
These keys work in every lock. Your precautions: Toyota dealer will need one of them to z When starting the engine, do not make a new key with a built−in trans- use the key with a key ring resting ponder chip.
Page 13 z Do not cover the key grip with any material that cuts off electromagnet- ic waves. z Do not knock the key hard against other objects. z Do not leave the key exposed to high temperatures for a long period, such as on the dashboard and hood under direct sunlight.
Page 14: Engine Immobilizer System
Toyota dealer. need additional keys, duplicates can be the electronic code in the chip corre- made by a Toyota dealer using the key The indicator light stays on except sponds to the registered ID code for number.
Page 15 Industry Canada. Operation is subject to This device complies with Part 15 of the the following two conditions: For your Toyota dealer to make you a FCC Rules. Operation is subject to the new key with built−in transponder chip, following two conditions:...
Page 16: Wireless Remote Control
Do not leave the transmitter in places If you lose your transmitter, contact your where the temperature becomes high Toyota dealer as soon as possible to such as on the dashboard. avoid the possibility of theft, or an acci- 1. Lock switch dent.
Page 17 —Locking and unlocking doors To lock and unlock both doors, push This complies with Part 15 of the FCC the switches of the transmitter slowly rules. Operation is subject to the follow- and securely. ing two conditions: To lock: Push the lock switch. Both doors (1) This device may not cause harmful are locked simultaneously.
Page 18 —Opening trunk lid —Activating alarm Coupe—When unlocking a door when both doors are locked, the interior light and ignition switch light come on. The lights remain on for about 15 seconds unless either door is opened and closed. (For further information, see “Interior light” on page 123 and “Ignition switch light and quarter trim courtesy light”...
Page 19 Check the beep ON/OFF operation by Toyota dealer. pushing the transmitter switch after you z Dispose of used batteries according finish this procedure. If the beep does not operate as expected, repeat this proce- to the local laws.
Page 20 After replacing the battery, check that the transmitter operates properly. If the trans- mitter still does not operate properly, con- tact your Toyota dealer. 2. Remove the circuit board, then remove 3. Put in a new transmitter battery with the discharged transmitter battery.
Page 21: Side Doors
Side doors— Coupe—When unlocking a door when both doors are locked, the interior light and ignition switch light will come on and re- main on for about 15 seconds before fad- ing out. (For further information, see “Inte- rior light” on page 123 and “Ignition switch light and quarter trim courtesy light”...
Page 22 The doors will front side. open and an accident may occur. To unlock: Push the switch down on the Toyota strongly recommends that all rear side. children be placed in the rear seat of the vehicle. Operating the switch simultaneously locks or unlocks both doors.
Page 23 —Automatic door locking and unlocking functions The power door lock switch can be reset AUTOMATIC DOOR LOCKING AUTOMATIC DOOR UNLOCKING in the following ways. You can set or cancel the following au- You can select the following functions: Turn the ignition key to “ON”. tomatic door locking function: Unlocking linked with the shift posi- Unlock both doors with the key or wire-...
Page 24: Power Windows
Power windows To select the unlocking linked with the To select the unlocking linked with the shift position: driver’s door: 1. Close all doors and turn the ignition 1. Close all doors and turn the ignition switch to the “ON” position. switch to the “ON”...
Page 25 Automatic operation: CAUTION Coupe—Push the switch completely down or pull it completely up, and then release Never try jamming any part of your it. The window will fully open or close. To body to activate the jam protection stop the window partway, lightly move the function intentionally, as it could re- switch in the opposite direction and then sult in a death or serious injury.
Page 26 OPERATING PASSENGER’S WINDOW switch on the passenger’s door. The driver’s door also has a switch that controls the passenger’s window. The window moves as long as you hold the switch. To open: Push down the switch. To close: Pull up the switch. If you push in the window lock switch on the driver’s door, the passenger’s window cannot be operated.
Page 27 Toyota dealer. When small children are in the ve- hicle, never let them use the power window switches without supervi- sion. Use the window lock switch to prevent them from making unex-...
Page 28: Trunk Lid
Trunk lid— —Luggage security system CAUTION Keep the trunk lid closed while driv- ing. This not only keeps the luggage from being thrown out but also pre- vents exhaust gases from entering the vehicle. To open the trunk lid, pull up on the This system prevents someone (with lock release lever.
Page 29 —Internal trunk release handle CAUTION Always lock the trunk lid and all doors, and keep away the vehicle keys out of children’s reach. Never leave children unattended in the vehicle. Unsupervised children may lock themselves in the vehicle or trunk and suffer serious injuries or death.
Page 30: Hood
Hood Theft deterrent system To open the hood: 2. In front of the vehicle, pull up the To deter vehicle theft, the system is auxiliary catch lever and lift designed to sound an alarm if any of 1. Pull the hood lock release lever. The hood.
Page 31 The system will automatically be set after WHEN THE SYSTEM IS SET 30 seconds. When the system is set, the Activating the system indicator light will start flashing again. The system will sound the alarm under 4. After making sure the indicator light the following conditions: starts flashing, you may leave the ve- If any of the doors are forcibly un-...
Page 32: Fuel Tank Cap
If this happens, immediately unlock If the system does not work properly, any of the doors with the key or the wire- have it checked by your Toyota dealer. less remote control transmitter, and the alarm will stop.
Page 33 The indicator lamp goes off after driving injury by spraying out of the filler several times. If the indicator lamp does neck if the cap is suddenly re- not go off, contact your Toyota dealer as moved. soon as possible.
Page 34: Electric Moon Roof
The sun shade can be opened or closed the event of an accident. by hand. Use only a genuine Toyota fuel tank Sliding operation— cap for replacement. It is designed to regulate fuel tank pressure.
Page 35 To stop the roof partway, push the switch by your Toyota dealer. volved in an accident. on either the “SLIDE OPEN” or “TILT UP” side briefly.
Page 36: Convertible Top
Convertible top— —Convertible top precautions Be sure to remove the ignition key CAUTION Before you raise the convertible when you leave your vehicle. top, always make sure there is no- When raising or lowering the con- body near the top. You must also Never leave anyone (particularly a make sure nobody places his or her vertible top, keep hands clear from...
Page 37 —Before operating the convertible top 1. Park your vehicle on level ground. z When the convertible top is low- NOTICE 2. Make sure the parking brake is applied ered, keep the rear window defog- z Make sure there are no items or firmly and the automatic transmission ger turned off to avoid damage to packages between the rear seatback...
Page 38 —Lowering the convertible top If the convertible top does not lower dur- ing switch operation, see “If the convert- ible top does not rise or lower” on page 311 in Section 4 for instructions. 1. Lower the sun visors. Pull down the 2.
Page 39 —Raising the convertible top —Using the top boot 1. Lower the sun visors. Push the con- 2. Pull down the convertible top by The top boot is used to conceal the vertible top control switch on the grasping the handle under the con- lowered convertible top.
Page 40 The top boot is folded as shown in the 1. Insert the top boot rear retainer un- 2. Insert the top boot front retainer be- illustration and stored in the trunk. derside of the body molding and tween the rear seatback and anchor place the top boot over the lowered bar.
Page 41 4. Hook the tabs at the rear and sides of the top boot to the quarter trim edge. 3. Tuck the top boot edge under the body molding, behind the rear seat- back and under the quarter trims un- til the edge seems are hidden.
Page 42 Plug 5. Remove the plugs from the plug- holes on the inside of the quarter trim and hook the straps into the plugholes. Store the plugs in a safe place until need- ed again. When removing the top boot, do the above procedures in the reverse order.
Page 43 SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Occupant restraint systems Seats ............Front seats .
Page 44: Seats
Front seats— Seats —Front seat precautions While the vehicle is being driven, all ve- Driver seat Slightly recline the back of hicle occupants should have the seatback seat. Although vehicle designs vary, upright, sit well back in the seat and prop- CAUTION many drivers can achieve the 250 erly wear the seat belts provided.
Page 45 —Seat adjustment precautions Front passenger seat Front seats (with SRS side airbags) CAUTION CAUTION CAUTION Do not adjust the seat while the vehicle is moving as the seat may The SRS side airbags are installed in The SRS front passenger airbag also unexpectedly move and cause the the driver and front passenger seats.
Page 46 —Adjusting front seats (manual seat) 1. SEAT POSITION ADJUSTING LEVER While adjusting the seat, do not put Hold the center of the lever and pull it your hands under the seat or near up. Then slide the seat to the desired the moving parts.
Page 47 —Adjusting front seats (power seat) 1. SEAT POSITION, SEAT CUSHION CAUTION ANGLE AND SEAT HEIGHT ADJUST- ING SWITCH Avoid reclining seatback Move the control switch in the desired more than needed. The seat belts pro- direction. vide maximum protection in a frontal Releasing the switch will stop the seat at or rear collision when the driver and that position.
Page 48 —Moving front seats for rear seat entry Coupe—Before access to the rear seat, CAUTION push the seat belt hanger down as far as it will go when it is in the raised Avoid reclining seatback position. more than needed. The seat belts pro- Convertible—Before access to the rear vide maximum protection in a frontal seat, remove the seat belt from the seat...
Page 49: Fold−Down Rear Seat
Fold−down rear seat (coupe) From the driver’s side— Pull up the seatback angle adjusting lever (manual seat) or seatback lock re- lease lever (power seat), and incline the seatback. After passengers are in, lift the seatback. From the front passenger’s side— Pull up the seatback angle adjusting lever or press the lock release pedal behind the seatback, and move the seat...
Page 50: Seat Heaters
Seat heaters CAUTION When returning the seatback to the upright position, observe the follow- ing precautions in order to prevent death or serious injury in a collision or sudden stop: Make sure the seatback is securely locked by pushing forward and rear- ward on top of the seatback and that the red mark at the button on top of the seatback cannot be seen.
Page 51: Head Restraints
Head restraints NOTICE CAUTION z Do not put unevenly weighed ob- Occupants must use caution when op- jects on the seat and do not stick erating the seat heater because it sharp objects (needles, nails, etc.) may make them feel too hot or cause into the seat.
Page 52: Seat Belts
Seat belts— —Seat belt precautions For your safety and comfort, adjust the Toyota strongly urges that the driver and Do not allow any children to stand up or head restraint before driving. passengers in the vehicle be properly re- kneel on either rear or front seats. An...
Page 53 —Fastening front and rear seat belts CAUTION Be careful not to damage the belt webbing or hardware. Take care that Persons should ride in their seats they do not get caught or pinched in the seat or doors. properly wearing their seat belts...
Page 54 CAUTION Always make sure the shoulder belt is positioned securely across the shoulder, but kept away from neck. Use the seat belt guide to position the belt if necessary. Failure to properly position the belt may re- duce the amount of protection in an Buckle accident and could lead to death or serious injuries in a collision.
Page 55 If the seat belt does not function normally, immediately contact your Toyota dealer. Do not use the seat until the seat belt is fixed, because it cannot protect an adult occupant or your child from death or serious...
Page 56 Toyota dealer free of charge. Please contact your local Toyota dealer to order the proper required length for the extender. Bring the heaviest coat you ex- pect to wear for proper measurement and selection of length.
Page 57 Make sure the front passenger oc- Do not use the seat belt extender cupant classification indicator light when installing child restraint indicates “ON” when using the seat system on the front or rear passen- belt extender for the front passen- ger seat.
Page 58 If the seat belt does not function normally, immediately contact your Toyota dealer. Do not use the seat until the seat belt is fixed, because it cannot protect an adult occupant or your child from death or serious...
Page 59 (ECU and sensors) result in death or serious injury. Con- fenders, front end structure or con- 5. Seat belt pretensioner assemblies sult your Toyota dealer about any re- sole pair and modification. 6. Front passenger’s...
Page 60 133 in Sec- tion 1−6.) This indicator comes on when the igni- In the following cases, contact your Toyota If any of the following conditions occurs, tion key is turned to the “ON” position. dealer as soon as possible: this indicates a malfunction of the airbags It goes off after about 6 seconds.
Page 61: Srs Airbags
SRS airbags— —SRS driver airbag and front passenger airbag In response to a severe frontal impact, CAUTION the SRS front airbags work with the seat belts to help reduce injury by inflating. The SRS front airbag system is de- The SRS front airbags help reduce injuries signed only as a supplement to the mainly to the driver’s or front passenger’s primary protection of the driver and...
Page 62 The SRS front airbags will deploy if the child restraint system. Toyota severity of the impact is above the de- strongly recommends that all in- signed threshold level, comparable to an fants and children be placed in the...
Page 63 8. Driver’s seat position sensor 9. Airbag sensor assembly 10. Airbag module for driver Hitting a curb, edge Falling into or (airbag and inflator) of pavement or jumping over The airbag sensor assembly consists of a hard surface a deep hole safing sensor and airbag sensor.
Page 64 These Toyota strongly recommends that: are usually in the nature of minor burns or abrasions and swelling, but the force of...
Page 65 For instruc- sult your Toyota dealer. It may dan- force of the deploying airbags. Like- tions concerning the installation of gerously interfere with the SRS front wise, the driver and front passenger a child restraint system, see “Child...
Page 66 Contact your means the SRS front airbags are oper- z Attachment of a grille guard (bull Toyota dealer as soon as possible. ating properly. bar, kangaroo bar, etc.), snowplow, When the ignition key is turned to the winches or any other equipment to “ON”...
Page 67 —SRS side airbags NOTICE Do not disconnect the battery cables before contacting your Toyota dealer. In the following cases, contact your Toyota The SRS (Supplemental Restraint Sys- dealer as soon as possible: tem) side airbags are designed to pro- vide further protection for the driver...
Page 68 Toyota To ensure maximum protection in pant in the seat. (As for the front passen- an accident, the driver and all pas- strongly recommends that all in-...
Page 69 Collision from the rear Collision from the front Vehicle rollover The SRS side airbag system may not The SRS side airbags are not generally The SRS side airbag system consists activate if the vehicle is subjected to a designed to inflate if the vehicle is in- mainly of the following components, and collision from...
Page 70 The SRS side airbag system is controlled Front seats may be hot for several min- by the airbag sensor assembly. The airbag utes, but the airbags themselves will not sensor assembly consists of a safing sen- be hot. The airbags are designed to inflate sor and airbag sensor.
Page 71 If you wish to modify your vehicle for great force or the side airbag may a person with physical disability, con- not activate correctly, resulting in sult your Toyota dealer. It may dan- death or serious injury. Likewise, gerously interfere with the SRS side driver...
Page 72 If any of the following conditions occurs, this indicates a malfunction of the airbags This indicator comes on when the igni- In the following cases, contact your Toyota or seat belt pretensioners. Contact your tion key is turned to the “ON” position.
Page 73 Do not disconnect the battery cables reduce injury by inflating. The SRS side before contacting your Toyota dealer. airbags help reduce injuries mainly to the driver’s or front passenger’s chest and the SRS curtain shield airbags help reduce injuries mainly to the driver’s, front pas-...
Page 74 Toyota passenger and rear outside passen- ger seat belt systems. To ensure the child restraint system. It is dan- strongly recommends that all in-...
Page 75 Collision from the rear Collision from the front Vehicle rollover The SRS side airbag and curtain shield The SRS side airbags and curtain shield The SRS side airbag and curtain shield airbag system may not activate if the airbags are not generally designed to airbag system consists mainly of the fol- vehicle is subjected to a collision from inflate if the vehicle is involved in a...
Page 76 8. Front passenger’s seat belt buckle Deployment of the airbags happens in a switch fraction of a second, so the airbags must inflate with considerable force. While the 9. Airbag sensor assembly system is designed to reduce serious inju- The SRS side airbag and curtain shield ries, it may also cause minor burns or airbag system is controlled by the airbag abrasions and swelling.
Page 77 Do not allow anyone to get his/her Do not allow anyone to kneel on Do not allow anyone to get his/her head closer to the area where the the passenger seat, facing the pas- head hands windows side airbag and curtain shield air- senger’s side door, since the side since curtain...
Page 78 Do not hook a hanger, heavy or sharp pointed objects on the coat hook. If the curtain shield airbag inflates, those items will be thrown away with great force or the curtain shield airbag may not activate cor- rectly, resulting in death or serious injury.
Page 79 Modification of the side structure of tion key is turned to the “ON” position. sult your Toyota dealer. It may dan- It goes off after about 6 seconds. This the passenger compartment gerously interfere with the SRS side...
Page 80 This warning light system monitors the In the following cases, contact your Toyota airbag sensor assembly, front airbag sen- dealer as soon as possible: sors, side and curtain shield airbag sen- Any of the SRS side airbags and cur- sors, curtain shield airbag sensors, driv- tain shield airbags have been inflated.
Page 81 —Front passenger occupant classification system Your vehicle is equipped with a front If the front passenger occupant classifica- passenger occupant classification sys- tion system determines that a person of tem. This system detects the conditions adult size sits in the front passenger seat 1—4 in the table on page 83 and based but the “OFF”...
Page 82 The front passenger occupant classifi- cation indicator light will indicate “ON” and “OFF” when the ignition key is turned “ON” position. After about four seconds, it will go off. After that, the front passenger occupant clas- sification system operates and judges whether to indicate “ON”...
Page 83 Condition and operation in the front passenger occupant classification system Indicator/warning light Devices Condition detected by Front Curtain shield Front Side airbag Front the front passenger passenger Front airbag in the passenger’s on the front passenger’s SRS warning occupant classification occupant passenger front...
Page 84 CAUTION Make sure the front passenger oc- If an adult sits in the front passen- cupant classification indicator light ger seat, the occupant classification indicates “ON” when using the seat indicator light should indicate “ON”. To avoid potential death or serious belt extender for the front passen- If the “OFF”...
Page 85: Child Restraint
Child restraint— —Child restraint precautions The front passenger occupant classifica- Toyota strongly urges the use of ap- Do not let a rear passenger lift the tion indicator light may indicate “ON” (the propriate child restraint systems for front passenger seat with their feet front passenger airbag and side airbag on children.
Page 86 Toyota strongly urges use of A forward−facing child restraint sys- Do not use the seat belt extender proper child restraint system which should allowed when installing child restraint system on the front or rear passen- conforms to the size of the child,...
Page 87 —Types of child restraint —Child restraint system system A child restraint system for a small Child restraint systems are classified into child or baby must itself be properly the following 3 types depending on the restrained on the seat with the lap por- child’s age and size.
Page 88 —Installation with seat belt (C) Booster seat (A) INFANT SEAT INSTALLATION CAUTION An infant seat must be used in rear− facing position only. Never install a rear−facing child re- straint system on the front passen- ger seat even if the front passenger occupant classification indicator...
Page 89 1. Run the lap and shoulder belt through Contact your Toyota dealer immedi- Do not install a child restraint sys- or around the infant seat following the ately. install child...
Page 90 2. Fully extend the shoulder belt to put it 3. While pressing the infant seat firmly CAUTION in the lock mode. When the belt is against the seat cushion and seatback, then retracted even slightly, it cannot let the shoulder belt retract as far as Push and pull the child restraint sys- be extended.
Page 91 Install the convertible seat on the front passenger seat only when it is unavoid- able. Your vehicle is equipped with a front passenger occupant classification system. In order to activate the occupant classifi- cation system correctly, install the for- ward−facing child restraint system on the front passenger seat in the following or- der: 1.
Page 92 Remove the child restraint instructions provided by the child re- restraint system and the front pas- system and contact your Toyota dealer. straint system manufacturer. senger airbag and side airbag on front...
Page 93 Do not allow the child to lean his/ her head or any part of his/her body against the door or the area of the seat, front or rear pillar or roof side rail from which the side airbags or curtain shield airbags deploy even if the child is seated in the child restraint system.
Page 94 1. Run the lap and shoulder belt through Contact your Toyota dealer immedi- Do not install a child restraint sys- or around the convertible seat following ately. install child tem on the rear seat if it interferes...
Page 95 2. Fully extend the shoulder belt to put it 3. While pressing convertible seat CAUTION in the lock mode. When the belt is firmly against the seat cushion and then retracted even slightly, it cannot seatback, let the shoulder belt retract Push and pull the child restraint sys- be extended.
Page 96 Move seat fully back 4. To remove the convertible seat, press (C) BOOSTER SEAT INSTALLATION CAUTION the buckle release button and allow the A booster seat must be used in for- belt to retract completely. The belt will ward−facing position only. A forward−facing child restraint sys- move freely again and be ready to should...
Page 97 Do not allow the child to lean his/ CAUTION her head or any part of his/her body against the door or the area Always make sure the shoulder belt of the seat, front or rear pillar or is positioned across the center of roof side rail from which the side child’s shoulder.
Page 98 If the seat belt does not function normally, cannot protect your child from death or serious injury. Contact your Toyota dealer immedi- ately. install child restraint system on the seat until the seat belt is fixed. 2. To remove the booster seat, press the...
Page 99 Symbol Anchor brackets Use the anchor bracket on the package TO USE THE ANCHOR BRACKET: 2. Open the lid of the anchor bracket. tray behind the rear seat to attach the top 1. Outside anchor brackets only— strap. Remove the head restraint. Anchor brackets are installed for each rear seating position.
Page 100 —Using a top strap (convertible) 3. Securely fasten the child restraint 4. Outside anchor brackets only— Follow the procedure below for a child system with the seat belt. Replace the head restraint. restraint system that requires the use of a top strap. Latch hook onto the anchor...
Page 101 Anchor brackets Symbol Use the anchor bracket on the back of the TO USE THE ANCHOR BRACKET: 2. Securely fasten the child restraint rear seat head restraint to attach the top system with the seat belt. 1. Remove the cover for the anchor strap.
Page 102 —Installation with child restraint lower anchorages (coupe) Lower anchorages for the child restraint systems complying with the FMVSS225 CMVSS210.2 specifications installed in the rear seat. The anchorages are installed in the gap between the seat cushion and seatback of both outside rear seats. Child restraint systems complying with the FMVSS213 CMVSS213...
Page 103 —Installation with child restraint lower anchorages (convertible) CHILD RESTRAINT SYSTEM CAUTION INSTALLATION 1. Widen the gap between the seat When using the lower anchorages cushion and seatback slightly and for the child restraint system, be confirm the position of the lower an- sure that there are no irregular ob- chorages near the button on the jects around the anchorages or that...
Page 104 CHILD RESTRAINT SYSTEM INSTALLATION 1. Widen the gap between the seat cushion and seatback slightly and confirm the position of the lower an- chorages near the button on the seatback. 2. Type A—Latch the hooks of lower straps onto anchorages tighten the lower straps.
Page 105 CAUTION When using the lower anchorages for the child restraint system, be sure that there are no irregular ob- jects around the anchorages or that the seat belt is not caught. Push and pull the child restraint system in different directions to be sure it is secure.
Page 107 SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Steering wheel and Mirrors Tilt and telescopic steering wheel ......Outside rear view mirrors .
Page 108: Tilt And Telescopic Steering Wheel
Tilt and telescopic steering wheel CAUTION Do not adjust the steering wheel while the vehicle is moving. Doing so may cause the driver to mishan- dle the vehicle and an accident may occur resulting in death or serious injuries. After adjusting the steering wheel, try moving it up and down or for- ward and rearward to make sure it is locked in position.
Page 109: Outside Rear View Mirrors
Outside rear view mirrors— With auto anti−glare inside rear view mir- CAUTION ror— When the inside rear view mirror darkens Do not adjust the mirror while the in automatic function mode, the driver’s vehicle is moving. Doing so may outside rear view mirror also darkens to cause the driver to mishandle the reduce the reflection of the headlights of vehicle and an accident may occur...
Page 110: Anti−Glare Inside Rear View Mirror
—Power rear view mirror Anti−glare inside rear view control mirror NOTICE If ice should jam the mirror, do not operate the control or scrape the mir- ror face. Use a spray de−icer to free the mirror. To adjust a mirror, use the switches. Adjust the mirror so that you can just see the rear of your vehicle in the mir- 1.
Page 111: Auto Anti−Glare Inside Rear View Mirror
Auto anti−glare inside rear view mirror In automatic function mode, if the mirror CAUTION detects light from the headlights of the vehicle behind you, the mirror surface Do not adjust the mirror while the darkens slightly to reduce the reflected vehicle is moving.
Page 112: Sun Visors
Sun visors— To block out glare, move the sun visor. To block out glare from the front—Swing down the sun visor (position 1). To block out glare from the side—Swing down the sun visor, remove it from the hook and swing it to the lateral side (posi- tion 2).
Page 113 —Vanity mirrors To use the vanity mirror, swing down the sun visor and open the cover. The vanity lights come on when you open the cover.
Page 115 SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Lights, Wipers and Defoggers Headlights and turn signals ........Headlight beam level control .
Page 116: Headlights And Turn Signals
If you feel that the automatic light control Position 2—Headlights ed immediately when entering a dark tun- comes into operation too early or too late, above nel, parking structure, etc. have the sensor adjusted by your Toyota dealer. The headlight indicator lights up in the instrument cluster.
Page 117 Automatic light cut off system To turn off the DRL system, twist the knob NOTICE to position 3 (“DRL OFF”) or turn the Position 1— ignition switch off. To prevent the battery from becoming The lights automatically turn off when the discharged, do not leave the lights on driver’s door is opened with the ignition for a long period when the engine is...
Page 118 Headlights and turn signals (for Canada) High−Low beams—For high beams, turn TURN SIGNALS HEADLIGHTS the headlights on and push the lever away To signal a turn, push the headlight/ To turn on the following lights: Twist from you (position 1). Pull the lever to- turn signal lever up or down to position the headlight/turn signal lever knob.
Page 119 If you feel that the automatic light control headlight switch is off. comes into operation too early or too late, have the sensor adjusted by your Toyota NOTICE dealer. To prevent the battery from becoming...
Page 120 Daytime running light (DRL) system The Daytime Running Light (DRL) system can make it easier for others to see the front of your vehicle during the day. The DRL system can be helpful in many differ- ent driving conditions, but they can be especially helpful in the short periods after dawn and before sunset.
Page 121: Headlight Beam Level Control
Headlight beam level control Emergency flashers To adjust the headlight beam level, turn the dial. The following list shows examples of prop- er dial settings. For loading conditions oth- er than those listed, adjust the dial posi- tion so that the beam level is the same as the one obtained according to the list when only the driver is in the vehicle.
Page 122: Instrument Panel Light Control
Instrument panel light control Front fog lights NOTICE To prevent the battery from becoming discharged, do not leave the switch on longer than necessary when the engine is not running. To adjust the brightness of the instru- To turn on the front fog lights, twist ment panel lights, turn the knob.
Page 123: Interior Light
Ignition switch light and Interior light quarter trim courtesy light ILLUMINATED ENTRY SYSTEM When the switch is in the “DOOR” posi- tion, the interior light comes on and re- mains on for about 15 seconds before fading out in the following cases: Open and close any of the doors.
Page 124: Personal Lights
Personal lights For easy access to the ignition switch, Coupe— the ignition switch light comes on when To turn on the front personal light, any of the doors are opened or when push the lens. To turn the light off, the ignition switch is turned to the push the lens once again.
Page 125: Windshield Wipers And Washer
Windshield wipers and washer ILLUMINATED ENTRY SYSTEM The “INT” band lets you adjust the wiping (convertible) time interval when the wiper lever is in the intermittent position (position 1). Twist When the switch is in the “DOOR” posi- the band upward to increase the time be- tion, the front personal lights come on and tween sweeps, and downward to decrease remain on for about 15 seconds before...
Page 126: Rear Window And Outside Rear View Mirror Defoggers
If a nozzle becomes blocked, The key must be in the “ON” position. contact your Toyota dealer to have the The thin heater wires on the inside of the vehicle serviced. rear window will quickly clear the sur- faces.
Page 127 Make sure you turn the defoggers off when the surfaces are clear. Leaving the defoggers on for a long time could cause the battery to discharge, especially during stop−and−go driving. The defoggers are not designed for drying rain water or for melting snow.
Page 129 SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Gauges, Meters and Service reminder indicators Fuel gauge ..........Engine coolant temperature gauge .
Page 130: Fuel Gauge
The indicator lamp goes off after driving several times. If the indicator lamp does not go off, contact your Toyota dealer as soon as possible. The gauge indicates the approximate The gauge indicates the engine coolant...
Page 131: Tachometer
Tachometer Odometer and two trip meters NOTICE z Do not remove the thermostat in the engine cooling system as this may cause the engine to overheat. The thermostat is designed to con- trol the flow of coolant to keep the temperature of the engine within the specified operating range.
Page 132 3. Trip meter reset knob—Resets the two trip meters to zero, and also change the meter display. To change the meter display, quickly push and release the knob. The meter display changes in the order from the odometer to trip meter A to trip meter B, then back to the odometer each time you push.
Page 133: Service Reminder Indicators And Warning Buzzers
Service reminder indicators and warning buzzers If the indicator or buzzer comes on... Do this. If parking brake is off, stop immediately and contact Toyota dealer. Fasten driver’s seat belt. (indicator and buzzer) Fasten front passenger’s seat belt. (indicator and buzzer) Stop immediately and contact Toyota dealer.
Page 134 If the indicator or buzzer comes on... Do this. Take vehicle to Toyota dealer. If brake system warning light is also on, stop immediately and contact Toyota dealer. Close all doors. Take vehicle to Toyota dealer immediately. Adjust tire inflation pressure (including ground spare tire). If warning light comes on after blinking for 1 minute, contact Toyota dealer.
Page 135: Driver's Seat Belt Reminder Light
If the buzzer Toyota dealer in the following cases: still sounds, make sure the front passen- In this case, not only the anti−lock ger’s seat belt is fastened. brake system will fail but also the...
Page 136: Charging System Warning Light
Then, if the seat belt is still unfastened, tighten it. on, immediately stop the vehicle in a the buzzer will sound in a different tone safe place and contact your Toyota These cases are temporary malfunctions. for 20 seconds. Even if the vehicle speed dealer.
Page 137: Low Engine Oil Pressure Warning Light
Have your vehicle This light comes on when the fuel level in Section 6. checked by your Toyota dealer as soon as in the tank becomes nearly empty. Fill up (f) Low Engine Oil Pressure Warning possible.
Page 138 Contact your is turned to the “ON” position. If the anti− The light comes on with the ignition key Toyota dealer as soon as possible to lock brake system and the brake assist turned to the “ON” position. If the anti−...
Page 139: Open Door Warning Light
Contact your Toyota dealer as soon as possible. (j) SRS Warning Light Toyota dealer as soon as possible to When the ignition key is turned to the service the vehicle. This indicator comes on when the igni- “ON”...
Page 140: Tire Pressure Warning Light
Contact miles), the light will come on after the your Toyota dealer. In the following cases, contact your Toyota ignition key is turned to “ON” position. dealer: For details, see “Tire pressure warning The light will remain on thereafter.
Page 141 “ACC” or light goes off after about 6 seconds. “LOCK” position. If any service reminder indicator or warn- ing buzzer does not function as described above, have it checked by your Toyota dealer as soon as possible.
Page 143 SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Ignition switch, Transmission and Parking brake Ignition switch ..........Automatic transmission .
Page 144: Ignition Switch
Ignition switch “START”—Starter motor on. The key When starting the engine, the key may will return to the “ON” position when seem stuck at the “LOCK” position. To released. free it, first be sure the key is pushed all the way in, and then rock the steer- For starting tips, see page 283 in Section ing wheel slightly while turning the key gently.
Page 145 NOTICE Do not leave the key in the “ON” position if the engine is not running. The battery will discharge and the ignition could be damaged.
Page 146: Automatic Transmission
Automatic transmission Your automatic transmission has a shift lock system to minimize the possibility of incorrect operation. This means you can only shift out of “P” position when the Selector lever brake pedal is depressed (with the ignition switch in the “ON” position). (a) Selector lever The shift position is also displayed on the instrument cluster.
Page 147 (b) Normal driving (c) Driving in “S” mode 1. Start the engine as instructed in “How You can change the shift range position to start the engine” on page 284 in in the “S” mode. The shift range posi- Section 3. The transmission must be in tion can be switched between 5 (fifth “P”...
Page 148 Have stronger than that of the “3” range your vehicle checked/repaired your position is necessary. Toyota dealer as soon as possible. In this case, you can drive in the same condition as in the “D” position.
Page 149 (d) Using engine braking To use engine braking, you can downshift Move the selector lever down to the Move the selector lever down to the the transmission as follows: “−” side to select the “3” range. The “−” side to select the “1” range. The transmission will downshift...
Page 150: Manual Transmission
Manual transmission (f) Parking NOTICE 1. Bring the vehicle to a complete stop. Always use the brake pedal or the 2. Pull the parking brake lever up fully to parking brake to hold the vehicle on securely apply the parking brake. an upgrade.
Page 151: Traction Control System
Traction control system For the best compromise between fuel The traction control system automatical- NOTICE economy and vehicle performance, you ly helps prevent the spinning of front should upshift or downshift at the following wheels when the vehicle is started or Do not downshift if you are going speeds: accelerated on slippery road surfaces.
Page 152 “ON”. If the indicator light does not come on when the ignition is turned on, contact your Toyota dealer. NORMAL DRIVING MODE TRACTION CONTROL OFF MODE Leave the system on during the ordi-...
Page 153 “TRAC OFF” indicator light comes on for In the following cases, contact your Toyota a few seconds when the ignition key is dealer: turned to “ON”. It will come on again The warning light does not come on when you push the “TRAC OFF” switch to after the ignition key is turned to “ON”.
Page 154: Vehicle Stability Control System
“ON”. If the indicator light does not When replacing the tires or wheels, come on when the ignition is turned on, contact your Toyota dealer. (See contact your Toyota dealer. “Checking and replacing tires” on page 344 in Section 7−2.)
Page 155: Tire Pressure Warning System
Tire pressure warning system In the following cases, contact your Toyota The tire pressure warning system warns dealer: you that the tire inflation pressure is low. The warning light does not come on after the ignition key is turned to “ON”.
Page 156 “ON” position and goes off after a few the spare tire and have the flat tire seconds. This means the tire pressure repaired by the nearest Toyota deal- warning system is operating properly. If the tire inflation pressure becomes low, Avoid abrupt maneuvering and bra- the light comes on again.
Page 157 Pushing the tire pressure warning reset CAUTION As an added safety feature, your ve- switch should not turn off the tire pressure hicle has been equipped with a tire warning light. Adjusting the tire inflation Each tire, including the spare (if pro- pressure monitoring system (TPMS–...
Page 158 When the tires must be repaired or replaced, have them repaired or re- If a radio set at similar frequencies is placed by the nearest Toyota dealer in use in the vehicle. or authorized tire dealer. The tire If a window tint that affects the radio pressure warning valves and trans- wave signals is installed.
Page 159 Pushing the tire pressure warning reset NOTICE: −Connect the equipment into an outlet switch should not turn off the tire pressure This equipment has been tested and on a circuit different from that to which warning light. found to comply with the limits for a the receiver is connected.
Page 160 ID code of tire pres- 3. Turn the ignition key to the “ON” posi- sure warning valve and transmitter. Have tion. the ID code registered by your Toyota dealer. 4. Push and hold the tire pressure warn- ing reset switch until the tire pressure If the ID code is not registered, the sys- warning light blinks slowly three times.
Page 161: Parking Brake
In this case, initialize the system again. If initialization cannot be performed, have the system checked at your Toyota dealer. For Canada...
Page 162: Cruise Control
Cruise control When parking, firmly apply the parking The cruise control is designed to main- brake to avoid inadvertent creeping. tain a set cruising speed without requir- ing the driver to operate the accelera- To set: Pull up the lever. For better hold- tor.
Page 163 you need acceleration—for example, CAUTION when passing—depress accelerator pedal enough for the vehicle to exceed To avoid accidentally engaging the the set speed. When you release it, the cruise control, turn the system off vehicle will return to the speed set prior when it is not in use.
Page 164 While the If this is the case, contact your Toyota lever is held down, the vehicle speed will To turn the cruise control off, press the dealer and have your vehicle inspected.
Page 165 SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Audio and hands−free phone systems Reference ..........Using your audio system .
Page 166: Reference
Using your audio system— Reference —Some basics This section describes some of the basic SWITCHING BETWEEN FUNCTIONS features on Toyota audio systems. Some Push “FM1”, “FM2”, “AM·SAT ” information may not pertain to your sys- “DISC·AUX” if the system is already on tem.
Page 167 Satellite tuner technology notice: TONE AND BALANCE You must enter into a separate service Toyota’s satellite radio tuners are awarded For details about your system’s tone and agreement with the XM radio in order to Type Approval Certificates from XM Satel-...
Page 168 YOUR RADIO ANTENNA Coupe—Your vehicle antenna printed on the inside of the rear window. NOTICE Putting a film (especially a conductive or metallic film) on the rear window will noticeably reduce the sensitivity of the radio. Convertible—Your vehicle has a mast type antenna.
Page 169 —Controls and features Details of specific buttons, controls and features are described in the alphabetical list that follows.
Page 170 ) ton number will appear on the display. : Use of satellite radio requires XM tuner and service. Contact your Toyota deal- Push the “AM·SAT” button to turn on the To recall a preset station: Push the button er for details.
Page 171 Wait for about 2 sec- onds until the radio returns to the pre- : Use of satellite radio requires XM tuner The JBL brand audio system — vious channel or “CH001”. If it does and service. Contact your Toyota deal- Each time push “AUDIO not change automatically, select anoth- er for details.
Page 172 : Use of satellite radio requires XM tuner disc operation, the display shows from the player and insert an MP3/WMA and service. Contact your Toyota deal- track, or track and disc number currently data disc. er for details. being played.
Page 173 MP3/WMA player To load multiple compact discs, push and RAND (Random) hold the button (until you hear a beep To skip up or down to a different folder: There are two random features—you can when the audio system is on). When the Push “...
Page 174 MP3/WMA player RPT (Repeat) MP3/WMA player There are two random playback features— Compact disc player There are two repeat features—you can you can either listen to all of the files on repeat a signal file or an entire folder. There are two repeat features—you can the compact discs in random order.
Page 175 To stop scanning, push this button again. push this button again. If the player has scanned all the discs, it will stop scan- : Use of satellite radio requires XM tuner ning. and service. Contact your Toyota deal- er for details.
Page 176 “ ” will appear on the display and ent the weak signal from creating noise. and service. Contact your Toyota deal- the player will scan the first file of the If the signal becomes extremely weak, the er for details.
Page 177 (Music and Talk) of only XM satellite radio and “Text Information” linked to the re- spective audio services. : Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details. : Text Information includes, Channel Name, (Artist) Name, (Song) Title and Category Name.
Page 178: Audio Remote Controls
This switch has the following features— : Use of satellite radio requires XM tuner To select a preset station: and service. Contact your Toyota deal- Quickly push and release the “ ” or “"” er for details. Some parts of the audio system can be side of the switch.
Page 179: Aux Adapter
To select a desired file: : Use of satellite radio requires XM tuner Quickly push and release the “ ” or “"” and service. Contact your Toyota deal- side of the switch until the file you want er for details.
Page 180: Audio System Operating Hints
Audio system operating hints When using a portable audio device con- Here are some common reception prob- NOTICE nected to the power outlet, noise may lems that probably do not indicate a prob- occur during playback. If this happens, lem with your radio: To ensure correct audio system op- use the power source of the portable au- erations:...
Page 181 Alternation or modifications carried out without appropriate authorization may in- validate the user’s right to operate the equipment. : Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.
Page 182 CARING FOR YOUR COMPACT DISC PLAYER AND DISCS Your compact disc player is intended for use with 12 cm (4.7 in.) discs only. Extremely high temperatures can keep your compact disc player from working. On hot days, use the air conditioning to cool the vehicle interior before you listen to a disc.
Page 183 NOTICE Do not use special shaped, transpar- ent/translucent, low quality or labeled discs such as those shown in the il- lustrations. The use of such discs may damage the player or changer, or it may be impossible to eject the disc.
Page 184 MP3/WMA FILES WMA files can contain a WMA tag that is used in the same way as an ID3 MP3 (MPEG Audio Layer 3) and WMA tag. WMA tags carry information such (Windows Media Audio) are audio com- as track title, artist name. pression standards.
Page 185 The MP3/WMA player does not play CD−R and CD−RW discs back MP3/WMA files from discs record- CD−R/CD−RW discs that have not been er using packet write data transfer subject to the “finalizing process” (a 001.mp3 (UDF format). Discs should be re- process that allows discs to be played 002.wma corded using “pre−mastering”...
Page 186 If you insert a CD−RW disc into the TERMS ISO 9660 format— MP3/WMA player, playback will begin Packet write— This is the international standard for the more slowly than with a conventional formatting of CD−ROM folders and files. This is a general term that describes the CD or CD−R disc.
Page 187: Hands−Free Phone System
Hands−free phone system— —Reference WMA— Phone Setup (see page 193) Security (see page 198) WMA (Windows Media Audio) is an audio Pair phone Set PIN compression format developed To use the hands−free system, you The PIN can be set or changed. Microsoft.
Page 188 —Some basics Delete Speed Dial This system supports Bluetoothr, wireless system that allows you to The registered speed dial can be de- make or receive calls without taking leted. your hands from the steering wheel and List names without using cables to connect the The registered names can be checked.
Page 189 The system may not function in the follow- When transferring ownership of the ve- ing conditions and places: hicle: FCC ID: HYQBTAU01A IC ID: 1551A−BTAU01A The cellular phone is turned off. A lot of personal data is registered MADE IN JAPAN when you use the hands−free system.
Page 190 —Control and features DSteering switches and microphone NOTE: This equipment been CAUTION: Radio Frequency Radiation tested and found to comply with the Exposure limits for a Class B digital device, This equipment complies with FCC pursuant to part 15 of the FCC Rules. radiation exposure limits set forth for These limits are designed to provide uncontrolled equipment and meets the...
Page 191 1. Volume control switch 5. Microphone To increase the volume: Push “+”. The microphone is used when talking on To decrease the volume: Push “−”. the phone or using the speech command system. When driving at 80 km/h (50 mph) or more, the volume automatically increases without switch...
Page 192 DAudio unit 1. Display Displays such items as the reception lev- el, a party’s name and phone number. See “DISPLAY” described following page for further details about the display. 2. “AUDIO CONTROL” knob Turning the “AUDIO CONTROL” knob dis- plays the menu items, names, numbers, etc.
Page 193 —Phone Setup 2. Reception level display The phone setup menu includes the fol- lowing: Displays reception level Bluetoothr signals. This may not match Pair Phone the display on the cellular phone. The To use the hands−free system, you need reception level of some cellular phones to register your phone in the system.
Page 194 Set PassKey To pair phones [The phone is paired and ready for use. Returning to the main menu.] is heard and The passkey can be changed. A 4 to 8 1. Push the talk switch and say [Pair [Paired] is displayed. digit code can be input as a passkey.
Page 195 To select a phone When the phone is selected by using To change a name the knob: 1. Push the talk switch and say [Select 1. Push the talk switch and say [Change phone], or turn the “AUDIO CONTROL” [XXX selected. Returning to the phone name], or turn the “AUDIO CONTROL”...
Page 196 When the phone is selected by a voice When the phone is selected by using The system may not function in the follow- command: the knob: ing cases: [XXX (phone name) Push the talk switch [XXX Push the talk switch and say con- If no phone has been registered.
Page 197 Select phone To set a passkey When using the knob: Push the talk switch and say [Select 1. Push the talk switch and say [Set 1. Turn the “AUDIO CONTROL” knob to phone], or turn the “AUDIO CONTROL” passkey], or turn the “AUDIO CON- select a number.
Page 198 —Security To delete a phone The system may not function in the follow- The security menu includes the following: ing cases: 1. Push the talk switch and say [Delete], Set PIN (Personal Identification Num- or turn the “AUDIO CONTROL” knob If no phone has been registered.
Page 199 To enter the security menu To set a PIN When using a voice command: 1. Push the off−hook switch to turn the Push the talk switch and say [Set PIN], 1. Push the talk switch and say a new hands−free system on. or turn the “AUDIO CONTROL”...
Page 200 If the PIN is to be changed: To lock the phone book When using a voice command: [There is a PIN number in place. Push the 1. Push the talk switch and say [Phone [XXXX (PIN number) Push the talk switch talk switch and say the correct PIN num- book lock], or turn the “AUDIO CON- and say confirm.
Page 201 The system may not function in the follow- When using a voice command: The system may not function in the follow- ing cases: ing cases: [XXXX (PIN number) Push the talk switch If the current number is not correct. and say confirm. Otherwise, say go back.] If the current number is not correct.
Page 202 —System Setup —Phone Book The system setup menu includes the fol- To initialize The phone book menu includes the follow- lowing: ing: 1. Turn the “AUDIO CONTROL” knob until Adjust Guidance Volume [Initialize] is displayed and push the Add Entry knob.
Page 203 To enter the phone book menu To add entry (a) By voice 1. Push the off−hook switch to turn the The add entry includes the following: 1. Push the talk switch and say [By hands−free system on. voice], or turn the “AUDIO CONTROL” (a) By Voice knob until [By Voice] is displayed and 2.
Page 204 If [Confirm] is said, then input a voice Confirm (b) By Phone tag. Push the talk switch and say [Confirm], or 1. Push the talk switch and say [By [Push the talk switch and say a name.] is turn the “AUDIO CONTROL” knob until phone], or turn the “AUDIO CONTROL”...
Page 205 (c) Call History Outgoing (d) Manual Input 1. Push the talk switch and say [Call his- 1. Push the talk switch and say [Outgo- 1. Turn the “AUDIO CONTROL” knob until tory], or turn the “AUDIO CONTROL” ing], or turn the “AUDIO CONTROL” [Manual Input] is displayed and push knob until [Call History] is displayed knob until [Outgoing] is displayed and...
Page 206 To list names Input operation— Display: [995] The voice tags can be edited during the You say: [Nine, nine, five] Repeating the above operation deletes name playback. the last digits in reverse order of in- Voice output: [995 to store push the 1.
Page 207 Editing the voice tags Delete Entry To delete entry The following can be performed: Push the talk switch and say [Delete 1. Push the talk switch and say [Delete entry], or turn the “AUDIO CONTROL” entry], or turn the “AUDIO CONTROL” Dial knob until [Delete Entry] is displayed and knob until [Delete Entry] is displayed...
Page 208 To delete speed dial To change name When using a voice command: 1. Push the talk switch and say [Delete 1. Push the talk switch and say [Change [XXXX (phone number) Push the talk speed dial], or turn the “AUDIO CON- name], or turn the “AUDIO CONTROL”...
Page 209 When using the knob: To set speed dial When using a voice command: [Push the talk switch and say a new 1. Push the talk switch and say [Set [XXXX (phone number) To register this as name.] is heard. Speed dial], or turn the “AUDIO CON- a speed dial entry, push the talk switch TROL”...
Page 210 —Redial The following can be performed: Dial INFORMATION Dial Turn the “AUDIO CONTROL” knob until A shortcut to each of the following the number that you want to dial is dis- Delete functions is available. Push the off− played and push the knob. After that, do Store hook switch and talk switch, and say the one of the following:...
Page 211 —Callback Store The following can be performed: INFORMATION 1. Turn the “AUDIO CONTROL” knob until Dial D Up to five outgoing calls can be the dial number that you want to regis- Delete stored in the system. ter is displayed and push the knob. Store D When five outgoing calls are stored 2.
Page 212 Dial Store INFORMATION Turn the “AUDIO CONTROL” knob until 1. Turn the “AUDIO CONTROL” knob until D Up to five incomming calls can be the number that you want to dial is dis- the dial number that you want to regis- stored in the system.
Page 213 —Making a phone call If the cellular phone is not registered, this To speed dial When using a voice command: system cannot be used. See page 193 for 1. Push the preset button where the de- [XXXX (phone number) Push the off−hook registering a cellular phone.
Page 214 To dial by Number INFORMATION INFORMATION 1. Push the talk switch and say [Dial by D The phone numbers registered in D The system can recognize single Number]. the phone book can be retrieved. digits from zero to nine, #(pound), [Dial by number.
Page 215 —Receiving a phone call When receiving a phone call, a ring tone Display: [995734] Cancel operation— is audible and the system changes into Repeat the above procedure until the Do either one of the following: the telephone mode. entire number that you want to dial is D Push the on−hook switch at anytime When receiving a phone call, the display input.
Page 216 —Talking on the phone To transfer a call to the phone: While talking on the phone, the display is To transfer a call from the phone: as follows. The display differs depending The received call can be transferred from Pushing the off−hook switch while talking on whether or not the vehicle is in motion.
Page 217 SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Air conditioning system Manual air conditioning system Controls ..........Air flow selector settings .
Page 218: Manual Air Conditioning System
Manual air conditioning system— —Controls 1. Fan speed selector 2. Air flow selector 3. Temperature selector 4. “A/C” button 5. Air intake selector...
Page 219 Fan speed selector If you want to return the setting to RECIRCULATE mode, press the air in- Turn the knob to adjust the fan speed—to take selector button once again. the right to increase, to the left to de- crease. Press the “A/C”...
Page 220 If this happens, take your ve- hicle to a Toyota dealer for service. Air intake selector Press the button to select the air source. 1. RECIRCULATE (indicator light is on)—...
Page 221: Air Flow Selector Settings
—Air flow selector settings —Operating tips To cool off your Toyota after it has been parked in the hot sun, drive with the windows open for a few minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly.
Page 222 If following another vehicle on a dusty Heating road, or driving in windy and dusty For best results, set controls as follows: conditions, it is recommended that the air intake selector be temporarily set to Fan speed—Any setting except “OFF” RECIRCULATE, which will close off the Temperature—Towards WARM outside passage and prevent outside...
Page 223 Air conditioning Defogging Defrosting For best results, set controls as follows: The inside of the windshield The outside of the windshield For best results, set controls as follows: For best results, set controls as follows: Fan speed—Any setting except “OFF” Temperature—Towards COLD Fan speed—Any setting except “OFF”...
Page 224: Automatic Air Conditioning System
Automatic air conditioning system— —Controls 1. Temperature selector 2. “AUTO” button 3. “OFF” button 4. Air intake selector 5. Windshield air flow button 6. “MODE” button (air flow selector) 7. “A/C” button 8. Fan speed selector...
Page 225 “AUTO” button Temperature selector For automatic operation of the air condi- To increase the temperature, press the tioning, press the “AUTO” button. “AUTO” “"” side, to decrease it, press the “ ” will appear on the display to show that side.
Page 226 This position allows the air intake to Windshield air flow button select FRESH automatically. This is to When this button is pressed, air flows clean up the front view more quickly. mainly from the windshield vents and If you want to return the setting to turns on the defogging function with the RECIRCULATE mode, press the air in- purpose of clearing the front view.
Page 227 To turn the air conditioning off, press the button again. If the “A/C” button indicator flashes, there is a problem in the air conditioning system conditioning automatically shuts off. If this happens, take your ve- hicle to a Toyota dealer for service.
Page 228: Air Flow Selector Settings
—Air flow selector settings —Operating tips To cool off your Toyota after it has been parked in the hot sun, drive with the windows open for a few minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly.
Page 229 If following another vehicle on a dusty Heating Air conditioning road, or driving in windy and dusty For best results, set controls as follows: For best results, set controls as follows: conditions, it is recommended that the For automatic operation— For automatic operation—...
Page 230 Ventilation Defogging and defrosting Press the “A/C” button for dehumidified heating or cooling. This setting clears the For best results, set controls as follows: —The inside of the windshield front view more quickly. For automatic operation— For best results, set controls as follows: On humid days, do not blow cold air —For automatic operation Press in the “AUTO”...
Page 231: Side Vents
Side vents Air conditioning filter— Press the “A/C” button for dehumidified heating or cooling. This setting clears the front view more quickly. To heat the vehicle interior while de- frosting windshield, choose floor/windshield air flow. If air flow control is not satisfactory, check The air conditioning filter information the side vents.
Page 232 —Checking and replacing the air conditioning filter The air conditioning filter may clog af- ter long use. The filter may need to be replaced if the air flow of the air condi- tioning and heater experiences extreme reductions in operating efficiency, or if the windows begin to fog up easily in FRESH mode.
Page 233 2. Push in each side of the glove box 3. Remove the filter case from the filter 4. Remove filter from the filter to disconnect the claws. outlet as shown in the illustration. case. 5. Inspect the filter on the surface. If it is the just moderately dusty, it may be cleaned by blowing compressed air from the reverse surface.
Page 234 When installing the filter in the filter case, keep the “ UP” mark pointing up. INFORMATION The air filter should be installed prop- erly in position. The use of air condi- tioning with the air filter removed may cause deteriorated dustproof per- formance and then affect air condi- tioning performance.
Page 235 SECTION − OPERATION OF INSTRUMENTS AND CONTROLS Other equipment Multi−information displays ........Compass .
Page 236: Multi−Information Displays
Multi−information displays— When the ignition switch is on, the last SELECTING UNIT previously used mode displayed just be- You can select the unit between En- fore the ignition switch is off will appear. glish/U.S. customary system and metric If the electrical power source has been unit.
Page 237 —Cruise information left side display indicates cruise information when the ignition switch is in the “ON” position. Each time you push the “DISP” button steering wheel, display toggles through the following informa- tion. 1. Instantaneous fuel consumption 2. Average fuel consumption 3.
Page 238 The displayed value is updated every 2 3. Driving range 4. Average vehicle speed seconds. (“RANGE MI” or “RANGE km”) (“AVG. MPH” or “AVG. km/H”) Note that an accurate figure may not be The distance the vehicle can travel with Average vehicle speed is calculated and shown in the following cases.
Page 239: Compass
Push the “AUTO” switch for longer than 3 will appear on the display. If “−−” appears seconds to turn the compass system on on the display, contact your Toyota dealer. and off. There may be a case that “−−” appears momentarily when the ignition is quickly turned to “ON”.
Page 240 The compass indicates the direction The vehicle is in a place where the that the vehicle is heading. In the earth’s magnetic field is subject to in- above case, it shows that the vehicle is terference by artificial magnetic fields heading north.
Page 241 Samoa: 5 Guam: Saipan: CALIBRATING THE COMPASS (deviation calibration) The direction display on the compass deviates from the true direction deter- mined by the earth’s magnetic field. The angle of deviation varies according to the geographic position of the vehicle. To adjust this deviation, stop the vehicle, then push and hold the switch until the zone number appears on the display.
Page 242 If “C” appears on the display because of If calibration cannot be performed because a drastic change in the magnetic field, of the magnetized vehicle etc., take your perform circling calibration. vehicle to Toyota dealer.
Page 243: Portable Ashtray
Portable ashtray Perform circling calibration just after CAUTION you have purchased your Toyota. And then always perform circling calibration When doing the circling calibration, after the battery has been removed, re- be sure to secure a wide space, placed or disconnected.
Page 244: Power Outlets
Power outlets The power outlets are designed for CAUTION power supply for car accessories. The key must be in the “ACC” or “ON” To reduce the chance of injury in position for the power outlet to be used. case of an accident or sudden stop while driving, always completely close NOTICE the ashtray after use.
Page 245: Garage Door Opener
Garage door opener The garage door opener ( Universal Transceiver) is manufactured Indicator light HomeLink under license from HomeLink and can programmed operate garage doors, gates, entry doors, door locks, home lighting systems, and security 25 to systems, etc. 75 mm (1 to 3 in.) (a) Programming the HomeLink The HomeLink...
Page 246 2. Place your hand−held garage transmit- 3. Simultaneously press hold ter 25 to 75 mm (1 to 3 in.) away from hand−held garage transmitter button the surface of the HomeLink along with the selected HomeLink but- ton. Keep the indicator light on the HomeLink in view while programming.
Page 247 5. Test the operation of the HomeLink Programming a rolling code system pressing the newly programmed button. your device “Rolling Code” If programming a garage door opener, equipped, is necessary follow check to see if the garage door opens steps 1 through 4 under the heading and closes.
Page 248 Canadian market To program other devices such as home 1. Decide which of the 3 HomeLink but- security systems, home door locks or tons you want to program. lighting, contact your authorized Toyota dealer for assistance. 2. Place your hand−held gate/device transmitter 25 to 75 mm (1 to 3 in.)
Page 249 Changes or modifications not Transceiver call the: expressly approved by the party re- Do not use this HomeLink Univer- sponsible for compliance could void Toyota Customer Experience Center at Transceiver with garage the user’s authority to operate the 1−800−331−4331 (U.S.A.) door opener that lacks the safety device.
Page 250: Glove Box
Glove box Auxiliary boxes CAUTION To reduce the chance of injury in case of an accident or a sudden stop, always keep glove door closed while driving. Center console To use the glove box: Open by pulling the lever. Lock by inserting the master key and turn- ing it clockwise.
Page 251: Rear Console Box
Rear console box To use the auxiliary box, open it as UPPER TRAY shown in the illustration. To access the upper tray, raise the con- sole box lid while pushing the lock re- CAUTION lease button. To reduce the chance of injury in case of an accident or a sudden stop, always keep the auxiliary box closed while driving.
Page 252: Cup Holders
Cup holders The cup holder is designed for holding cups or drink−cans securely. Front cup holder— To use the front cup holder, open the lid. A cup holder adapter is located among the cup holders which are under the lid. To hold the cups or drink−cans securely, ad- just the size with the adapter.
Page 253: Storage Box
Storage box Grocery bag hooks Cargo net This box is designed to hold things like This hook is designed to hang things To secure belongings, hang the cargo bottles. like grocery bags. net on the hooks. NOTICE NOTICE z Do not use the net to secure sharp To prevent damage to the hook, avoid hanging heavy loads on it.
Page 254: Floor Mat
Floor mat Use a floor mat of the correct size. CAUTION If the vehicle carpet and floor mat have 2 holes, then they are designed for use Make sure the floor mat is properly with locking clips. Fix the floor mat to the placed on the vehicle carpet.
Page 255 INFORMATION BEFORE DRIVING YOUR TOYOTA Information before driving your Toyota Break−in period ..........
Page 256: Break−In Period
Number 91) or higher. To help prevent gas station mix−ups, your to the future economy and long life of Toyota has a smaller fuel tank opening. 3.3 L V6 (3MZ−FE) engine: Select Oc- your vehicle: The special nozzle on pumps with un-...
Page 257 If you els. In the U.S., category 4 has been Toyota, be sure that it has an octane continue to have unacceptable driveability, adopted. The WWFC improves air quali- rating no lower than 87.
Page 258: Fuel Pump Shut Off System
Fuel pump shut off system Operation in foreign countries The fuel pump shut off system stops sup- If you plan to drive your Toyota in NOTICE plying fuel to the engine to minimize the another country... risk of fuel leakage when the engine stalls...
Page 259: Three−Way Catalytic Converters
Three−way catalytic converters The three−way catalytic converter is an NOTICE emission control device installed in the exhaust system. A large amount of unburned gases flowing into the three−way catalytic The purpose is to reduce pollutants in the converter may cause it to overheat exhaust gas.
Page 260: Engine Exhaust Cautions
If you smell exhaust fumes in the as possible. Remember, your Toyota time to time. If you hit something, vehicle, open windows dealer knows your vehicle and its...
Page 261: Facts About Engine Oil Consumption
It is normal that an engine should con- regularly. Toyota recommends that the oil A new engine consumes more oil, since sume some engine oil during normal level be checked every time you refuel its pistons, piston rings and cylinder walls engine operation.
Page 262: Iridium−Tipped Spark Plugs
Iridium−tipped spark plugs Brake system The tandem master cylinder brake system CAUTION is a hydraulic system with two separate sub−systems. If either sub−system should Do not pump the brake pedal if the fail, the other will still work. However, the engine stalls.
Page 263 ANTI−LOCK BRAKE SYSTEM Depressing the brake pedal on slippery CAUTION road surfaces such as on a manhole cov- The anti−lock brake system is designed er, a steel plate at a construction site, to help prevent lock−up of the wheels overestimate anti−lock joints in a bridge, etc.
Page 264 Contact your tive wheels’ turning speeds. The use Toyota dealer as soon as possible to of tires other than specified may fail service the vehicle. to detect the accurate turning speed...
Page 265 Contact your vehicle stability control system) parking brake system. This type of brake Toyota dealer as soon as possible to system needs bedding−down of the brake The light comes on when the ignition key service the vehicle.
Page 266: Brake Pad Wear Limit Indicators
This is the primary identification number checked and replaced by your Toyota for your Toyota. It is used in registering dealer as soon as possible. Expensive ro- the ownership of your vehicle. tor damage can result if the pads are not...
Page 267 —Engine number The engine number is stamped on the engine block as shown. 2.4 L 4−cylinder (2AZ−FE) engine The vehicle identification number (VIN) is also on the Certification Label. 3.3 L V6 (3MZ−FE) engine...
Page 268: Theft Prevention Labels
Theft prevention labels Suspension and chassis Your new vehicle carries theft preven- CAUTION tion labels which are approximately 47 mm (1.85 in.) by 12 mm (0.47 in.). Do not modify the suspension/chassis The purpose of these labels is to reduce with lift kits, spacers, springs, etc.
Page 269: Tire Information
Tire information— —Tire symbols (standard tire) This illustration indicates typical tire symbols. 1. Tire size—For details, see “—Tire size” on page 273. 2. DOT and Tire Identification Number (TIN)—For details, see “—DOT and Tire Identification Number (TIN)” on page 272. 3.
Page 270 7. “TUBELESS” “TUBE TYPE”—A tubeless tire does not have a tube inside the tire and air is directly filled in the tire. A tube type tire has a tube inside the tire and the tube maintains the air pressure. 8. Load limit at maximum cold tire inflation pressure—For details, see “Checking and replacing tires”...
Page 271 —Tire symbols (compact spare tire) This illustration indicates typical tire symbols. 1. “TEMPORARY USE ONLY”—A compact spare tire is identified by the phrase “TEMPORARY USE ONLY” molded into its sidewall. This tire is designed for temporary emergency use only. For details, see “Compact spare tire”...
Page 272 —DOT and Tire Identification Number (TIN) 6. Maximum cold tire inflation The “DOT” symbol certifies that the pressure—This means the pres- tire conforms to applicable Federal sure to which a tire may be in- Motor Vehicle Safety Standards. flated. For details about recom- mended cold tire...
Page 273 —Tire size —Name of each section of tire This illustration indicates typical tire 1. Section width 1. Bead size. 2. Tire height 2. Sidewall 1. Tire (P=Passenger car, 3. Wheel diameter 3. Shoulder T=Temporary use) 4. Tread 2. Section width (in millimeters) 5.
Page 274 150 would wear conditions on specified government purchasers of Toyota vehicles with in- one and a half (1−1/2) times as well test surfaces of asphalt and concrete. formation on uniform tire quality grad-...
Page 275 Temperature A, B, C—The tempera- ture grades are A (the highest), B, and C, representing the tire’s resis- tance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
Page 276 —Glossary of tire terminology Tire related term Meaning the combined weight (in excess of those standard items which may be replaced) of automatic transmission, power steering, power brakes, power Accessory weight windows, power seats, radio, and heater, to the extent that these items are available as factory−installed equipment (whether installed or not) tire inflation pressure when the vehicle has been parked for at least 3 hours or more, or it has not been driven more than 1.5 km or 1 mile...
Page 277 Tire related term Meaning 68 kg (150 lb.) times the number of occupants specified in the second Normal occupant weight column of Table 1 that follows distribution of occupants in a vehicle as specified in the third column of Table Occupant distribution 1 that follows the combined weight of those installed regular production options weighing...
Page 278 Tire related term Meaning the load on an individual tire that is determined by distributing to each axle Vehicle normal load on the tire its share of the curb weight, accessory weight, and normal occupant weight (distributed in accordance with Table 1 that follows) and dividing by two Weather side the surface area of the rim not covered by the inflated tire Table 1—Occupant loading and distribution for vehicle normal load for various designated seating capacities...
Page 279: Vehicle Load Limits
Seating capacity: Towing capacity capacity, seating capacity, towing ca- Coupe Toyota does not recommend towing pacity and cargo capacity. Follow the Total 5 (Front 2, Rear 3) a trailer with your vehicle. Your ve- load limits shown below. Vehicle load hicle is not designed for trailer towing.
Page 280: Cargo And Luggage
Cargo and luggage— —Capacity and distribution —Stowage precautions When stowing cargo and luggage in Cargo capacity depends on the to- D Never allow anyone to ride in the vehicle, observe the following: tal weight of the occupants. the enlarged trunk. It is not de- D Put cargo and luggage in the trunk (Cargo capacity) = (Total load capac- signed for passengers.
Page 281 (900 lb. – 366 lb. = 534 lb.) cargo and luggage load capacity of your vehicle. Toyota does not recommend towing a trailer with your vehicle. Your ve- hicle is not designed for trailer towing.
Page 282: Types Of Tires
Types of tires As shown in the above example, if the Determine what kind of tires your All season tires, however, do not have number of occupants increases, the vehicle is originally equipped with. adequate traction performance cargo and luggage load equaling the compared with snow tires in heavy or 1.
Page 283 SECTION STARTING AND DRIVING Starting and driving Before starting the engine ........How to start the engine .
Page 284: Before Starting The Engine
How to start the engine— Before starting the engine (b) Starting the engine (a) Before cranking 1. Check the area around the vehicle be- 1. Apply the parking brake firmly. Before starting the engine, be sure to fol- fore entering it. low the instructions in “(a) Before crank- 2.
Page 285: Tips For Driving In Various Conditions
Other- work safely, pull to the side of the road wise, the impact could cause severe and call a Toyota dealer for assistance. damage to the tires and/or wheels. When parking on a hill, turn the front...
Page 286: Winter Driving Tips
Be careful when accelerating, up- tected against freezing. cables. shifting, downshifting or braking on Only use “Toyota Super Long Life Coolant” Cold temperatures reduce the capacity of a slippery surface. Sudden accelera- similar high quality ethylene glycol any battery, so it must be in top shape tion or engine braking could cause based non−silicate, non−amine, non−nitrite,...
Page 287: Dinghy Towing
Dinghy towing Dinghy towing (with automatic transmission) (with manual transmission) NOTICE Do not use engine antifreeze or any other substitute because it may dam- age your vehicle’s paint. Do not use your parking brake when there is a possibility it could freeze. When parking, put the transmission into “P”...
Page 288: Trailer Towing
After dinghy towing, let the engine idle for to your vehicle. cycle, etc. Your Toyota is not designed more than 3 minutes before driving the for trailer towing or for the use of tow vehicle.
Page 289: How To Save Fuel And Make Your Vehicle Last Longer
How to save fuel and make your vehicle last longer Improving fuel economy is easy—just take Avoid long engine idling. If you have Keep front wheels in proper it easy. It will help make your vehicle last a long wait and you are not in traffic, alignment.
Page 290 CAUTION Never turn off the engine to coast down hills. Your power steering and brake booster will not function with- out the engine running. Also, the emission control system operates properly only when the engine is run- ning.
Page 291 SECTION IN CASE OF AN EMERGENCY In case of an emergency If your vehicle will not start ........If your engine stalls while driving .
Page 292: If Your Vehicle Will Not Start
Have converter may overheat and become a these positions for 15 seconds and re- the key checked at your Toyota dealer. If fire hazard. lease them. Then try starting the engine none of your keys work, there may be a with your foot off the accelerator pedal.
Page 293 (c) Jump starting To avoid serious personal injury and JUMP STARTING PROCEDURE The gas normally produced by a damage to your vehicle which might re- 1. If the booster battery is installed in battery will explode if a flame or sult from battery explosion, acid burns, another vehicle, make sure the vehicles spark is brought near.
Page 294 Jumper cable Discharged battery Booster battery Positive terminal Discharged battery Booster (“+” mark) battery Positive terminal Negative terminal Jumper cable (“+” mark) (“−” mark) Connecting point for 2.4 L 4−cylinder 4. Make the cable connections in the or- c. Connect the clamp of the negative (2AZ−FE) engine der a, b, c, d.
Page 295: If Your Engine Stalls While Driving
7. Carefully dispose of the battery cover cloths—they may now contain sulfuric acid. 8. If removed, replace all the battery vent plugs. If the cause of your battery discharging is not apparent (for example, lights left on), you should have it checked at your Toyota dealer.
Page 296: If You Cannot Increase Engine Speed
When the engine is running, keep checked by your Toyota dealer as soon as flashers. Put the transmission in “P” hands and clothing away from the possible. (automatic) or neutral (manual) and ap- moving fan and engine drive belts.
Page 297: If You Have A Flat Tire
You should have it checked as bility of death or serious injury: a highway. Park on a level spot soon as possible at your Toyota dealer. D Follow jacking instructions. with firm ground. D Do not put any part of your 2.
Page 298 D Make sure to set the jack prop- NOTICE erly in the jack point. Raising Do not continue driving with a the vehicle with jack improper- deflated tire. Driving even a ly positioned will damage the short distance can damage a vehicle or may allow the ve- tire and wheel beyond repair.
Page 299 —Required tools and spare tire The compact spare tire can be used D Replace the compact spare tire many times, if necessary. It has tread with the standard tire as soon life of up to 4800 km (3000 miles) de- as possible.
Page 300 Type A To remove the jack, turn the jack joint To store the jack, align the hole of the counterclockwise by hand until the jack head with the vehicle hook. Turn jack becomes free. the jack joint clockwise until the jack base fits securely with the vehicle body.
Page 301 —Removing wheel ornament —Blocking the wheel (steel wheels) To remove the spare tire: 1. Loosen the nut and remove it. 2. Remove the spare tire cover. 3. Loosen the bolt and remove it. 4. Remove the spacer. Then take the spare tire out of the vehicle.
Page 302 —Loosening wheel nuts —Positioning the jack CAUTION Never use oil or grease on the bolts or nuts. The nuts may loose and the wheels may fall off, which could cause a serious ac- cident. 4. Loosen all the wheel nuts. 5.
Page 303 —Raising your vehicle —Changing wheels CAUTION Never get under the vehicle when the vehicle is supported by the jack alone. 6. After making sure that no one 7. Remove the wheel nuts and is in the vehicle, raise it high change tires.
Page 304 —Reinstalling wheel nuts CAUTION Never use oil or grease on the bolts or nuts. Doing so may lead to overtightening the nuts and damaging the bolts. The nuts may loose and the wheels may fall off, which could cause a seri- ous accident.
Page 305 —Reinstalling wheel ornament —Lowering your vehicle (steel wheels) CAUTION D When lowering the vehicle, make sure all portions of your body and all other persons around will not be injured as the vehicle is lowered to the ground. D Have the wheel nuts tightened with torque wrench to 103 N·m (10.5 kgf·m, 76 ft·lbf), as soon as possible after changing...
Page 306 —After changing wheels 11. Check the air pressure of the re- CAUTION CAUTION placed tire. Adjust the air pressure to the specifi- Take due care in handling the or- Before driving, make sure all the cation designed on page 369 in Sec- nament to avoid unexpected per- tools, jack and flat tire are se- tion 8.
Page 307: If Your Vehicle Becomes Stuck
If your vehicle needs to be If your vehicle becomes stuck towed— If your vehicle becomes stuck in snow, NOTICE (a) Towing with wheel lift type truck— mud, sand, etc., then you may attempt to rock the vehicle free by moving it If you rock your vehicle, observe the —From front forward and backward.
Page 308 If towing is necessary, we recommend TOWING PRECAUTIONS: NOTICE you to have it done by your Toyota Use a safety chain system for all towing, dealer or a commercial tow truck ser- Do not tow with the key removed or and abide by the state/provincial and local vice.
Page 309 If towing is necessary, we recommend tance speeds. Also, you to have it done by your Toyota wheels, axles, drive train, steering and Do not tow with sling type truck, ei- dealer or a commercial tow truck ser- brakes must all be in good condition.
Page 310: If You Cannot Shift Automatic Transmission Selector Lever
6. Start the engine. For your safety, 2. Pry up the cover with a flathead keep the brake pedal depressed. screwdriver or equivalent. Be sure to have the system checked by your Toyota dealer as soon as possible.
Page 311: If The Convertible Top Does Not Rise Or Lower
Toyota dealer. If raising the convertible top manually is unavoidable, “RAISING CONVERTIBLE TOP MANUALLY”. Then you should have it checked as soon as possible at your Toyota dealer.
Page 312: If You Lose Your Keys
Even if you lose only one key, contact hicle by your Toyota dealer as soon as your Toyota dealer to make a new key. If possible to avoid the possibility of theft or you lose all your master keys, you cannot an accident.
Page 313 APPEARANCE CARE Corrosion prevention and appearance care Protecting your Toyota from corrosion ......Washing and waxing your Toyota .
Page 314 Now, it is up to you. Proper be dry. to see all the mud and dirt. It will do care of your Toyota can help ensure long− more harm than good to simply wet the High ambient temperatures can cause term corrosion prevention.
Page 315 Washing and waxing your Toyota Check the interior of your vehicle. Wa- Washing your Toyota Hand−washing your Toyota ter and dirt can accumulate under the Keep your vehicle clean by regular Work in the shade and wait until the floor mats and could cause corrosion. Oc- washing.
Page 316 2. Wash with mild car−wash soap, Road tar: Remove with turpentine mixed according to the manufacturer’s cleaners that are marked safe for painted instructions. Use a soft cotton mitt and surfaces. keep it wet by dipping it frequently into 3. Rinse thoroughly—dried soap the wash water.
Page 317 NOTICE blocked, contact your Toyota dealer to have the vehicle serviced. z Do not use harsh or abrasive clean- ers as they may damage the top NOTICE material. z Do not use water−repellents, wax or...
Page 318 Cleaning the interior Additional cleaning (for more difficult 3. Rinse thoroughly. CAUTION stains)— If any dirt is left, repeat the procedure. Follow the procedure shown below using After the top has been cleaned, rinse the Vehicles with side airbags and cur- a mild cleaning solution composed of the vehicle with clean water to remove all the tain shield airbags:...
Page 319 First vacuum over the upholstery to re- Do not apply water—the best results are Air conditioning control panel, audio move loose dirt. Then, using a sponge or obtained by keeping the carpet as dry as panel, instrument panel, console panel soft cloth, apply the soap solution to the possible.
Page 320 If you have any questions about the leather these could cleaning of your Toyota, your local cause discoloring. Toyota dealer will be pleased to answer them. z Use of a nylon brush or synthetic fiber cloth, etc. may scratch the fine grained surface of the leather.
Page 321 SECTION VEHICLE MAINTENANCE AND CARE Vehicle maintenance and care Maintenance requirements ........General maintenance .
Page 322: Maintenance Requirements
Simple instructions for how to per- or if you prefer, your Toyota dealer will be dating this warranty. See “Owner’s War- form them are presented on page 327 in pleased to do them at a nominal cost.
Page 323: General Maintenance
Booklet” or “Owner’s Manual Supple- should investigate the cause or take your information. ment” for the details. vehicle to your Toyota dealer or a quali- Radiator, condenser and hoses fied service shop immediately. It is recom- Check that the front of the radiator and...
Page 324 Exhaust system Seats Parking brake If you notice any change in the sound of Check that all front seat controls such as Check that the lever has the proper travel the exhaust or smell exhaust fumes, have seat adjusters, seatback recliner, etc. op- and that, on a safe incline, your vehicle the cause located and corrected immedi- erate smoothly and that all latches lock...
Page 325: Does Your Vehicle Need Repairing
Be on the alert for changes in perfor- If you notice any of these clues, take your mance, sounds, and visual tip−offs that vehicle to your Toyota dealer as soon as Check the pressure with a gauge ev- indicate service is needed. Some impor- possible.
Page 326: Emissions Inspection And Maintenance (I/M) Programs
Contact your Toyota dealer to even the malfunction indicator lamp does service the vehicle. not come on, contact your Toyota dealer Even if the malfunction indicator lamp to prepare the vehicle for re−testing. does not come on, your vehicle may not pass the I/M test as readiness codes have not been set in the OBD system.
Page 327 SECTION − DO−IT−YOURSELF MAINTENANCE Introduction Engine compartment overview ....... Fuse locations .
Page 328: Engine Compartment Overview
Engine compartment overview D2.4 L 4−cylinder (2AZ−FE) engine 1. Power steering fluid reservoir 2. Engine oil filler cap 3. Engine oil level dipstick 4. Brake fluid reservoir 5. Fuse block 6. Battery 7. Radiator 8. Electric cooling fans 9. Condenser 10.
Page 329 D3.3 L V6 (3MZ−FE) engine 1. Power steering fluid reservoir 2. Engine oil level dipstick 3. Engine oil filler cap 4. Brake fluid reservoir 5. Fuse block 6. Battery 7. Radiator 8. Electric cooling fans 9. Condenser 10. Windshield washer fluid tank 11.
Page 330: Fuse Locations
Read separate Toyota Warranty statement for details and suggestions. This Section gives instructions only for those items that are relatively easy for an owner to perform. As explained in Section 6, there are still a number of items that must be done by a qualified technician with special tools.
Page 331 Add only “Toyota Super Long Life plugs to prevent burning yourself. should be taken to avoid prolonged Coolant” or similar high quality eth- and repeated contact with it.
Page 332: Positioning The Jack
Positioning the jack When jacking up your vehicle with the z Do not allow dirt or anything else jack, position jack correctly as to fall through the spark plugholes. shown in the illustrations. z Use only spark plugs of the speci- fied type.
Page 333: Parts And Tools
Funnel (only for adding coolant) the vehicle is supported by the jack nance. Remember all Toyota parts are de- CHECKING BRAKE FLUID alone; use vehicle support stands. signed in metric sizes, so your tools must be metric.
Page 334 CHECKING AND REPLACING FUSES Parts (if replacement is necessary): Genuine Toyota fuse or equivalent with same amperage rating as original ADDING WASHER FLUID Parts: Water Washer fluid containing antifreeze (for winter use) Tools: Funnel REPLACING LIGHT BULBS Parts: Bulb with same number and wattage rating as original (See charts in “Re-...
Page 335 SECTION − DO−IT−YOURSELF MAINTENANCE Engine and Chassis Checking the engine oil level ....... . . Checking the engine coolant level .
Page 336: Checking The Engine Oil Level
Checking the engine oil level With the engine at operating tempera- If the oil level is below or only slightly ture and turned off, check the oil level above the low level line, add engine oil Low level Full level on the dipstick.
Page 337 Check the oil level on the dipstick once again after adding the oil. ENGINE OIL SELECTION “Toyota Genuine Motor Oil” is used in Outside temperature your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent...
Page 338: Checking The Engine Coolant Level
Mark is added to some oil con- If you can find no leak, have your Toyota Toyota engines. tainers to help you select the oil you dealer test the cap pressure and check should use.
Page 339: Checking The Radiator And Condenser
If any of the above parts are extremely dirty or you are not sure of their condi- Use of improper coolants may damage tion, take your vehicle to a Toyota dealer. your engine cooling system. Only use “Toyota Super Long Life Coolant”...
Page 340: Checking Brake Fluid
Checking brake fluid Checking power steering fluid If the level is low, add SAE J1703 or FMVSS No.116 DOT 3 brake fluid to the If cold O.K. brake reservoir. If hot O.K. Remove and replace the reservoir cap by hand. Fill the brake fluid to the dotted Open Close line.
Page 341: Checking Tire Inflation Pressure
Checking tire inflation pressure Clean all dirt from the outside of the res- Keep your tire inflation pressures ervoir tank and look at the fluid level. If at the proper level. the fluid is cold, the level should be in the The recommended cold tire inflation “COLD”...
Page 342 D Do not bleed or reduce tire The following instructions for Tire pressure gauge checking tire inflation pressure inflation pressure after driving. should be observed: It is normal for the tire inflation pressure to be higher after driving. D The pressure should D Never exceed the vehicle capac-...
Page 343 D A greater possibility of tire waste fuel, reduce the comfort of driv- damage from road hazards ing, reduce tire life and make your ve- hicle less safe to drive. If a tire frequently needs refilling, have it checked by your Toyota deal-...
Page 344: Checking And Replacing Tires
Checking and replacing tires The tires on your Toyota have built−in Any tires which are over 6 years Tread wear indicator tread wear indicators to help you old must be checked by a qualified know when the tires need replace- technician even if damage is not ment.
Page 345 REPLACING YOUR TIRES Toyota recommends all four tires, CAUTION or at least both of the front or rear When replacing a tire, use a tire of tires be replaced at a time as a set. the same size and construction,...
Page 346: Rotating Tires
Rotating tires To equalize the wear and help ex- tend tire life, Toyota recommends that you rotate your tires accord- ing to the maintenance schedule. (For scheduled maintenance infor- mation, please refer to the “Sched- uled Maintenance Guide” or “Own- er’s...
Page 347: Installing Snow Tires And Chains
Installing snow tires and chains WHEN SNOW TIRES SNOW TIRE INSTALLATION CAUTION CHAINS Snow tires should be installed on all Snow tires or chains are recommended wheels. Do not include a compact spare when driving on snow or ice. Installing snow tires on the front wheels tire when rotating the tires.
Page 348 NOTICE CAUTION Side chain If the wrong combination of tire and Do not exceed 50 km/h (30 mph) or chain is used, the chains could dam- chain manufacturer’s recom- age the vehicle body. mended speed limit, whichever is lower. CHAIN INSTALLATION Cross chain Drive carefully...
Page 349: Replacing Wheels
When balancing your wheels, use only at your Toyota dealer. characteristics resulting in loss of Toyota balance weights or equivalent A wheel of a different size or type may control. Otherwise, an accident may and a plastic or rubber hammer.
Page 351 SECTION − DO−IT−YOURSELF MAINTENANCE Electrical components Checking battery condition ........Battery recharging precautions .
Page 352: Checking Battery Condition
Checking battery condition— —Checking battery exterior —Precautions Terminals CAUTION If electrolyte gets on your skin, Ground cable thoroughly wash the contact area. If BATTERY PRECAUTIONS you feel pain or burning, get medi- cal attention immediately. The battery produces flammable and explosive hydrogen gas.
Page 353: Battery Recharging Precautions
Dark White dows” on page 24 and “Electric moon checked by your NOTICE roof” on page 34 in Section 1−2. Toyota dealer. Never recharge the battery while the Clear or Have battery engine is running. Also, be sure all light checked by your accessories are turned off.
Page 354: Checking And Replacing Fuses
Checking and replacing fuses Good Blown Good Blown Type A Type C the headlights or other electrical components do not work, check the fuses. If any of the fuses are blown, they must be replaced. See “Fuse locations” on page 330 in Sec- tion 7−1 for locations of the fuses.
Page 355: Adding Washer Fluid
Have your Toyota dealer correct it as light comes on, the washer tank may be soon as possible. empty. Add washer fluid.
Page 356: Replacing Light Bulbs
LEDs burn out, take your vehicle to inside of the lens, or if there is water your Toyota dealer to have the light re- Do not attempt to take apart or re- pooled inside...
Page 357 —Low beam headlights (except discharge headlights) Bulb Bulb Light bulbs Type Light bulbs Type Headlights (low) Personal lights — With discharge (convertible) headlights Interior light — — Without Vanity lights discharge — (coupe) headlights Vanity lights Headlights — — (convertible) (high beam) Glove box light —...
Page 358 The above illustration shows the left−hand If the connector is tight, wiggle it. headlight. Aiming is not necessary after replacing the bulb. When aiming adjustment is nec- essary, contact your Toyota dealer.
Page 359 Aiming is not necessary after replacing the bulb. When aiming adjustment is nec- If the connector is tight, wiggle it. essary, contact your Toyota dealer. The above illustration shows the left−hand headlight.
Page 360 —Rear turn signal lights 3. Install a new bulb into the mounting hole. Plug the connector. Aiming is not necessary after replacing the bulb. When aiming adjustment is nec- essary, contact your Toyota dealer.
Page 361 —High mounted stoplight —License plate lights (coupe) Use a flathead screwdriver.
Page 362 If either the left or right front fog, park- ing, front side marker, front turn signal and back−up lights burns out, contact your Toyota dealer. NOTICE Do not try to replace the front fog, parking, front side marker and front turn signal light bulbs by yourself.
Page 363 SECTION SPECIFICATIONS Specifications Dimensions and weight ........Engine .
Page 364: Dimensions And Weight
Dimensions and weight Engine Model: Coupe Convertible 2AZ−FE and 3MZ−FE Overall length mm (in.) 4890 (192.5) 4890 (192.5) Type: 2AZ−FE engine Overall width mm (in.) 1815 (71.5) 1815 (71.5) 4 cylinder in line, 4 cycle, gasoline Overall height mm (in.) 1440 (56.7) 1450...
Page 365: Fuel
4.5 (4.8, 4.0) Spark plug type: mance, use premium unleaded gaso- DENSO SK20R11 “Toyota Genuine Motor Oil” is used in line with an Octane Rating of 91 (Re- IFR6A11 your Toyota vehicle. Use Toyota approved search Octane Number 96) or higher.
Page 366 2.4 L 4−cylinder (2AZ−FE) engine 6.2 (6.6, 5.4) 3.3 L V6 (3MZ−FE) engine 9.2 (9.8, 8.1) Coolant type: “Toyota Super Long Life Coolant” is used in your Toyota vehicle at factory fill. In order to avoid technical problems, only “Toyota Super Long Life Coolant”...
Page 367 Fluid capacity (drain and refill), L (qt., WS” (2.4 L 4−cylinder [2AZ−FE] engine) 12.6—12.8 V Fully charged Imp. qt.): or “Toyota genuine ATF Type T−IV” (3.3 12.2—12.4 V Half charged 3.5 (3.7, 3.1) L V6 [3MZ−FE] engine) may cause dete- 11.8—12.0 V...
Page 368 BRAKES Minimum pedal clearance when depressed with the force of 490 N (50 kgf, 110 lbf) with the engine running, mm (in.): With vehicle stability control system 78 (3.1) Without vehicle stability control system 68.5 (2.7) Pedal free play, mm (in.): 1—6 (0.04—0.24) Pad wear limit, mm (in.): 1.0 (0.04)
Page 369: Tires
Tires Fuses Tire size and cold tire inflation pressure: Front and rear kPa (kgf/cm or bar, psi) Tire size Front Rear Wheel size 6 1/2 J P215/60R16 94V 200 (2.0, 29) 200 (2.0, 29) 6 1/2 JJ P215/55R17 93V 220 (2.2, 32) 220 (2.2, 32) When driving under the above driving conditions at sustained high speeds above 160 km/h (100 mph), in countries where such speeds are permitted...
Page 370 9. SPARE 5 A: Spare fuse 20. A/F 25 A: Multiport fuel injection sys- tem/sequential multiport fuel injection 10. AM2 30 A: Starting system, “IGN” and system “IG2” fuses 21. ABS No.2 25 A: Anti−lock brake sys- 11. HEAD LH UPR 10 A: Left−hand head- tem, vehicle stability control system, light (high beam) traction control system, brake assist...
Page 371 32. TAIL 10 A: Tail lights, parking lights, 41. ECU−B 10 A: Multiplex communication Fuses (type C) license plate lights, front fog lights, system (power door lock system, secu- 48. MAIN 40 A: Headlights, daytime run- multiport fuel injection system/sequen- rity system, auto−door locking system, ning light system, multiport fuel injec- tial multiport fuel injection system...
Page 373 ’07 Solara_U (L/O 0605) hU 7 Quick index D If a service reminder indicator or warning buzzer comes on ... D If your vehicle will not start ......... D If your engine stalls while driving .
Page 374: Occupant Restraint Systems
None of these systems, either individ- Toyota encourages you and your family to take the time to ually or together, can ensure that there is no injury in the read Section 1−3 of this Owner’s Manual carefully.
Page 375: Event Data Recorder
Toyota recommends you to read the provisions in Section D Engine speed 1−3 carefully and refer to them as needed during your time D Whether the brake pedal was applied or not of ownership of this vehicle.
Page 376 (VSC) system, its Electronic Control Unit (ECU) may Toyota will not disclose the data recorded in an EDR to a contain another EDR. There are a variety of driving situations which include activating the VSC under which third party except when: the VSC EDR will record certain information.
Page 377 ’07 Solara_U (L/O 0605) New vehicle warranty Important health and safety information about your Toyota Your new vehicle is covered by the following Toyota limited warranties: D New vehicle warranty CAUTION D Emission control systems warranty WARNING: Engine exhaust, some of its constitu-...
Page 378 Toyota Toyota A wide variety of non−genuine spare parts and accessories The spark ignition system in your Toyota meets all require- for Toyota vehicles are currently available in the market. ments of the Canadian Interference−Causing Equipment You should know that Toyota does not warrant these prod- Standard.
Page 379 Toyota dealer before you dispose of your this Owner’s Manual. For details about tire inflation vehicle.

This manual is also suitable for:

2007 camry 2007 solara

Toyota Camry Solara 2007 Operating Manual

Table of Contents

1 3 Section −

1 4 Section −

1 5 Section −

1 6 Section −

1 7 Section −

1 8 Section −

1 9 Section −

1 10 Section −

2 Section

3 Section

4 Section

6 Section

7 1 Section −

7 2 Section −

Quick Links

Chapters

Related Manuals for Toyota Camry Solara 2007

Summary of Contents for Toyota Camry Solara 2007

This manual is also suitable for:

Table of Contents