Door Lock Linked Window Operation; Power Windows Open Warning Buzzer - Toyota Camry 2018 Owner's Manual

172
3-5. Opening and closing the windows
●
If the door window cannot be opened and closed even when performing the
above operations, perform the following procedure for function initialization.
Vehicles without a smart key system:
1
Turn the engine switch to the "ON" position.
Vehicles with a smart key system:
Turn the engine switch to IGNITION ON mode.
Pull and hold the power window switch in the one-touch closing direction
2
and completely close the door window.
Release the power window switch for a moment, resume pulling the
3
switch in the one-touch closing direction, and hold it there for approxi-
mately 6 seconds or more.
Press and hold the power window switch in the one-touch opening direc-
4
tion. After the door window is completely opened, continue holding the
switch for an additional 1 second or more.
Release the power window switch for a moment, resume pushing the
5
switch in the one-touch opening direction, and hold it there for approxi-
mately 4 seconds or more.
Pull and hold the power window switch in the one-touch closing direction
6
again. After the door window is completely closed, continue holding the
switch for a further 1 second or more.
If you release the switch while the window is moving, start again from the
beginning.
If the window reverses and cannot be fully closed or opened, have the vehicle
inspected by your Toyota dealer.
■

Door lock linked window operation

●
Vehicles without a smart key system: The power windows can be opened
and closed using the key.
Vehicles with a smart key system: The power windows can be opened and
closed using the mechanical key.
●
The power windows can be opened using the wireless remote control.

( P. 136)
*
: These settings must be customized at your Toyota dealer.
■
Alarm (if equipped)
The alarm may be triggered if the alarm is set and a power window is closed
using the door lock linked power window operation function. (P. 75)
■

Power windows open warning buzzer

A buzzer sounds and a message is shown on the multi-information display in
the instrument cluster when the engine switch is turned off and the driver's
door is opened with the power windows open.
■
Customization
Some functions can be customized. (P. 567)
*
(P. 137)
*
(P. 526)
*