Table of Contents
Advertisement
Product description
Display functions
General information
The display is used to select or set the
following:
- the program
- the FlexiTimer (delay start)
- the Settings menu
The display can show the following:
- the current time of day
- the program stage
- the estimated time left for the pro-
gram to run
- any relevant fault messages and in-
formation
To save energy, the dishwasher
switches off after a few minutes if you
do not press any buttons during this
time.
Press the button to switch the dish-
washer back on.
16
Settings menu
The Settings menu is used to adapt the
electronic module of the dishwasher to
changing requirements. See the "Set-
tings menu" chapter for more informa-
tion on accessing the settings menu.
The arrows in the display indicate addi-
tional options. You can use the ar-
row buttons underneath the display, as
appropriate, to select these options.
The OK button is used to confirm a
message or setting and also to move to
the next menu or another level.
The option which is selected will have a
check next to it.
To exit a sub-menu, use the arrow
buttons to select the
the display and confirm your choice
with OK.
If you do not press any of the buttons
for several seconds, the display with re-
turn to the previous level. You may need
to enter your settings again.
Back
option in
Advertisement
Table of Contents
