[Channel Configuration] Menu - Sony BVM-E251 Operating Instructions Manual

Submenu Setting
For the XYZ format signal
When the ID number is entered, you
can select from the following:
[DCI XYZ]: Copies the color

temperature of DCI XYZ.
[User XYZ1] to [User XYZ5]:

Copies the color temperature of User
XYZ1 to User XYZ5.
When [DCI XYZ] data is changed, it is
displayed as [DCI XYZ*].
[External Memory] Copies data in the USB memory stick,
etc.
Note
Use the USB memory stick, etc. with
data stored by the BVM-E251/BVM-
E171 to use the [External Memory]
function.
When the item is selected, the file
names in the source USB memory stick,
etc. are displayed.
Except for the XYZ format signal
When the file is selected, you can select
from the following:
[D93]: Copies the color temperature

of D93.
[D65]: Copies the color temperature

of D65.
[D61]: Copies the color temperature

of D61.
[D55]: Copies the color temperature

of D55.
[DCI]: Copies the color temperature

of DCI.
[User1] to [User5]: Copies the color

temperature of User1 to User5.
When [D93], [D65], [D61], [D55], or
[DCI] data is changed, they are
displayed as [D93*], [D65*], [D61*],
[D55*], or [DCI*].
For the XYZ format signal
When the file is selected, you can select
from the following:
[DCI XYZ]: Copies the color

temperature of DCI XYZ.
[User XYZ1] to [User XYZ5]:

Copies the color temperature of User
XYZ1 to User XYZ5.
When [DCI XYZ] data is changed, it is
displayed as [DCI XYZ*].
Restore Factory Data
Resets the color temperature to the default setting.
You cannot select this when the setting is the default
value.
The following message appears to confirm the data reset
operation.
[Restore factory data ?]
 [OK]: To reset the data, press the ENTER (Ent) button.
 [Cancel]: To cancel, press the MENU button.
[Position Adj]
Adjusts the position of the picture when the analog
signal is input.
When the item is selected, the signal system to be set is
displayed.
You can select the item when the composite signal is
displayed.
To hide the characters on the monitor during
adjustment
Set the CHAR OFF button of the controller to on. As the
characters on the display are hidden, it becomes easy to
adjust the picture. To display the characters, set the
CHAR OFF button to off.
Note
This menu is not selectable when the internal signal or
captured frame is displayed.
Submenu Setting
[H Shift] Adjusts the horizontal position of the
picture.
As the setting increases, the picture
moves to the right, and as the setting
decreases, the picture moves to the left.
(Default value: [000])
Set in the [H Shift Offset] menu
(page 37) of the [Channel
Configuration] menu when it is
necessary to adjust the difference of the
horizontal position for different input
signals of the same signal system, etc.
[V Shift] Adjusts the vertical position of the
picture.
As the setting increases, the picture
moves up, and as the setting decreases,
the picture moves down. (Default value:
[000])

[Channel Configuration] Menu

This menu is used for pertaining data to the input
signals.
When [Channel Configuration] is selected, the
following menus are displayed.
35
Adjustment Using the Menus