Connecting The Hdmi Cable - Sony BVM-E251 Operating Instructions Manual

2
Connect to the network by using a 10BASE-T/
100BASE-TX cable (shielded-type, sold separately).
Note
We recommend to use an optional switching hub
with auto selection function (AUTO MDI/MDI-X)
of a straight/cross cable.
3
Connect the output cable on the AC adaptor
supplied with the controller to the DC 12V
connector of the controller.
Note
When multiple units are connected, set for the LAN
before setting the NETWORK switch to LAN
(page 22).
4
Set the NETWORK switches of each monitor and
the controller to LAN.
18

Connecting the HDMI cable

Connecting the HDMI
cable
1
Remove the two screws on both sides of the HDMI
IN connector.
2
Attach the HDMI cable holder (supplied) with the
removed screws.
HDMI cable holder (supplied)
3
Insert the HDMI cable and fix with a commercially-
available cable fixer (1 piece).
Cable fixer
HDMI cable