Table of Contents
Advertisement
Submenu
Setting
HDMI Signal Format
Select the HDMI signal format from
"Standard Format," "Enhanced
Format."
Standard Format:
Select to use for a standard HDMI
format signal.
Enhanced Format:
Select to use for a high-resolution
HDMI format signal
compatible HDMI format signal.
1) Signals in resolutions of 3840 ×
Notes
Images and sounds may not be
output correctly with "Enhanced
Format." In that case, select
"Standard Format."
To display the corresponding signal
with "Enhanced Format," use a
Premium High-Speed HDMI cable
within a length of 3 meters (Sony
product recommended).
PIP / POP menu
The PIP / POP menu is used to set the display
mode for the multi-image display and for each
input.
Submenu
Setting
Clipping Size
Select the clipping size of the HD
signal from "Normal," "4:3," "5:4" when
displaying the multi-image display.
Sub Screen Position
PIP
Sets the sub screen position for the
multi-image display (PIP).
POP
Sets the sub screen position for the
multi-image display (POP).
Pattern Skip
Sets the pattern that is skipped when
changing the displaying pattern by
pressing the PIP/POP button on the
front panel while displaying multi-
image display. Set to "Not Skip" or
"Skip" for the PIP1, PIP2, POP1, or POP2
pattern.
1)
or HDR-
2160 or 4096 × 2160 are listed
below:
4:4:4 RGB/YCbCr-50P/60P-8bit
signals
4:2:2 YCbCr-50P/60P-12bit
signals
4:4:4 RGB/YCbCr-25P/30P-10bit
signals
Input/Output Configuration menu
Submenu
Port A Input Select
Port B Input Select
Input Name
Power Supply
HDCP Setting
26
Setting
Sets the input connector that is
skipped when changing the input
signal by pressing the PORT A button.
Set to "Not Skip" or "Skip" for the
Display Port 1, Display Port 2, HDMI,
DVI-D, SDI input connector.
Sets the input connector that is
skipped when changing the input
signal by pressing the PORT B button.
Set to "Not Skip" or "Skip" for the
Display Port 1, Display Port 2, HDMI,
DVI-D, SDI input connector.
Set the name of the Display Port 1,
Display Port 2, HDMI, DVI-D, SDI input
connector.
Endoscope
Laparoscope
Ultrasound
Recorder
Printer
PACS
C-arm
Room Camera
Surgical Camera
Microscope
Vital Device
5V Output (DVI-D):
Select "On" when the 5 V output
power of the DVI-D input connector
is output. Select "Off" when the
power is not output.
DC Output Select:
Select "5V OUT" when voltage is
output from the 5V 2.0A (DC
output) connector. Select "12V OUT"
when voltage is output from the
12V 2.5A (DC output) connector.
Select "Off" when voltage is not
output.
Sets the HDCP setting for signals input
to the DP2
input connector and
DVI-D
input connector.
Enable:
Sets to use the signals protected
with HDCP.
Disable:
Sets to use the signals not
protected with HDCP. Signals are
output from the DP2
connector and DVI-D
connector only when the HDCP
Setting is set to "Disable" with the
signals not protected with HDCP.
Note
When "Disable" is set for the signals
protected with HDCP, images are not
displayed.
output
output
Advertisement
Table of Contents
