Table of Contents
Advertisement
Screen Control menu
The Screen Control menu is used to set the image display
setting for each input.
Submenu
Setting
4K Scan Size
Select the scan size for the 4K signal
display.
Select "Off" or "Mode7. "
HD Scan Size
Sets the scan size for the HD signal
display of 1920 × 1080.
Select from among "Off, " "Mode2, "
"Mode3, " "Mode4, " "Mode5, " "Mode6. "
SD Scan Size
Sets the scan size for the SD signal
display.
Select from among "Off, " "Mode1. "
Zoom
Video signals can be enlarged in the
specified ratio.
Select from among "Off, " "x1.2, " "x1.5, "
"x2.0. "
Note
Zoom is available only when the
horizontal resolution is 1280 dots or
more.
Flip Pattern
Sets the flip pattern of the display.
Select from among "Off, " "Rotation. "
Note
When images are rotated, the delay
amount will be one frame longer than
the normal time. Use the unit
considering the delay amount of the
entire system.
SD Aspect
Sets the aspect ratio of the SD signal
display.
Select from among "4:3, " "16:9. "
Interface Mode
Select the interface mode.
4K Quad: Select to display the 4K
4K Dual: Select to display the 4K
HD Dual: Select to display the HD
HD/SD Single: Select to display the
HD/SD Quad View: Select to display
PIP / POP menu
The PIP / POP menu is used to set the display mode for
the 2 or 3 screens display and for each input.
signal input to the A to D
connector of SDI 1.
signal input to the A or B
connector of SDI 1.
signal input to the A or B
connector of SDI 1.
HD or SD signal input to the A
connector of SDI 1.
the HD or SD signal input to the
A to D connector of SDI 1 in
images divided in four.
Submenu
Setting
3 Screen Display
Port C Display
Sets the display of the sub screen for the
third screen.
Select "On" or "Off. "
Port C Input
Sets the input connector for the third
screen.
Select from among "SDI 1, " "SDI 2, "
"DVI-D, " "HDMI. "
Clipping Size
Sets the HD of 1920 × 1080 clipping size
for each port when using 2 or 3 screens
display.
Select from among "Normal, " "4:3, "
"5:4, " "Overscan. "
Sub Screen Position
PIP
Sets the sub screen position for the 2 or
3 screens display (PIP).
Select from among "Lower Left, "
"Upper Left, " "Upper Right, " "Lower
Right. "
POP
Sets the sub screen position for the 2 or
3 screens display (POP).
Select from among "Right, " "Left. "
Note
Signals equivalent to 4K can display
only 1 screen for multiple displays.
For the signal type for using signals
equivalent to 4K, refer to "Available
signal formats" (page 36).
Pattern Skip
Sets the pattern that is skipped when
changing the displaying pattern by
pressing the PIP/POP button on the
front panel while displaying 2 or 3
screen displays.
Set to "Not Skip" or "Skip" for the PIP1,
PIP2, POP1, or POP2 pattern.
Input Configuration menu
Submenu
Setting
Input Name
Sets the name for each input connector.
Set the name of the SDI 1, SDI 2, DVI-
D, HDMI connector.
Endoscope
Laparoscope
Ultrasound
Recorder
Printer
PACS
C-arm
Room Camera
Surgical Camera
Microscope
Vital Device
29
Adjustment Using the Menus
Advertisement
Table of Contents
