Table of Contents
Advertisement
Menu
Setting
POP
Sets the sub screen position for the 2
or 3 screens display (POP).
Pattern Skip
Sets the pattern that is skipped when
changing the displaying pattern by
pressing the PIP/POP button on the
front panel or the Foot Switch while
displaying 2 or 3 screen displays.
Set to "Not Skip" or "Skip" for the PIP1,
PIP2, POP1, or POP2 pattern.
Input/Output Configuration menu
Menu
Setting
Clone Out
Format
Select the signal format for clone out
(SDI signal) from "3840×2160" or
"1920×1080."
Frame Rate
Select the frame rate for clone out (SDI
signal) from "60Hz" or "50Hz."
When "60Hz" is selected, clone out
(SDI signal) is output at 59.94 Hz.
Color Space
Select the color gamut from "Auto,"
"BT.709," or "BT.2020."
When "Auto" is selected, the color
gamut changes according to the
resolution set in "Format." When
"3840×2160" is selected, clone out (SDI
signal) is output with the "BT.2020"
setting. When "1920×1080" is selected,
it is output with the "BT.709" setting.
Transmission
Select the transmission gamma setting
Gamma
for output.
SDR:
Outputs with "2.2."
HLG:
Outputs with "HLG."
Auto:
Outputs an image according to the
monitor gamma settings of the
main screen. It outputs with HLG
when "Gamma" is set to "HLG" in
the "Color Tone Adjustment" menu,
and outputs with SDR when other
settings are selected.
Port A Input Select
Sets the input connector that is
skipped when changing the input
signal by pressing the PORT A button.
Set to "Not Skip" or "Skip" for the 12G-
SDI 1, 12G-SDI 2, 3G-SDI, Display Port,
HDMI, DVI-D input connector.
Port B Input Select
Sets the input connector that is
skipped when changing the input
signal by pressing the PORT B button.
Set to "Not Skip" or "Skip" for the 12G-
SDI 1, 12G-SDI 2, 3G-SDI, Display Port,
HDMI, DVI-D input connector.
Menu
Input Name
AUX IN Setting
Input Select
Power Supply
DC Output Select
Power Supply Port
Select
System Configuration menu
Menu
Control Lock
Control Lock
Lock Mode
OSD Setting
Menu Position
Status Display
30
Setting
Set the name of the 12G-SDI 1, 12G-SDI
2, 3G-SDI, Display Port, HDMI, DVI-D
input connector.
Endoscope
Laparoscope
Ultrasound
Recorder
Printer
PACS
C-arm
Room Camera
Surgical Camera
Microscope
Vital Device
Select the connector to input the AUX IN
signal from "12G-SDI 1," "12G-SDI 2," "3G-
SDI," "Display Port," "HDMI," or "DVI-D."
Select the connector for DC output
from "Off," "5V OUT," or "12V OUT."
When the 5 V output power of the DVI-
D input connector is output, select
"DVI-D."
When the 3.3 V output power of the
Display Port input connector is output,
select "Display Port." When both of
them are not output, select "Off."
Setting
Set when you want to limit the
operation of the control panel. Set to
"Off" for no limit, "On" to limit.
Sets the range to limit the operation of
the control panel. This setting is
available when "Control Lock" is set to
"On."
Menu:
Limits the menu operations other
than the control lock setting.
Menu&Button:
Limits all operations other than the
control lock setting.
Sets the screen position for the OSD
menu.
Select Port, Input Connector Name,
Control Lock, Signal Format, Scan Size,
4K Zoom, Flip Pattern, PIP/POP Mode,
A.I.M.E., and Energy Saving Mode are
displayed.
Advertisement
Table of Contents
