[File Management] Menu - Sony BVM-E251 Operating Instructions Manual

Submenu Setting
[Year] Sets the year.
[Month] Sets the month.
[Day] Sets the day.
[Hour] Sets the hour (in 24-hour display).
[Minute] Sets the minute.
[Cancel] Cancels the setting.
[Confirm] Executes the setting. Second is set to 0.
[Scan Mode Skip]
Sets the scan mode to be skipped when the Scan button
is pressed in the single mode connection.
[None]: No scan is skipped.

[Under Scan]: The under scan is skipped.

 [Over Scan]: The over scan is skipped.
[Screen Saver]
Sets the screen saver function.
[On]: When a still image is displayed on the screen for

10 minutes or more, the brightness of the screen is
automatically reduced to prevent burn-in of the
screen. The brightness returns to normal if you input a
moving image or operate the controller.
Approximately one minute before the screen saver is
activated, the STATUS indicator starts flashing
rapidly. Then, the STATUS indicator flashes slowly in
yellow (in the SDR display)/blue (in the HDR display)
when the screen saver is activated.
 [Off]: Disables the screen saver function.
Note
The screen saver function is automatically set to [On]
during manual adjustment of the color temperature,
contrast, brightness, chroma, and phase, regardless of
the setting of this item.
[License Management] (BVM-E171 only)
Activates the optional license to extend the monitor
function.
For details on extending the monitor function, see
"Extending the Monitor Function with the Optional
License (BVM-E171 only)" on page 79.
Submenu Setting
[Unique Device ID] Displays the unique device ID.
[Activate] Activates the license.
[Activate License Displays the activated license and
List] enabled function.
[Monitor Upgrade]
Upgrades the monitor.
66
Adjustment Using the Menus
When the item is selected, the screen for inputting the
password is displayed.
After the 4-digit password is entered, the current
versions of [Software Version], [Kernel Version], [FPGA
Version] are displayed.
For the password, see [Password] (page 65) of the [System
Configuration] menu.
For details on upgrading the monitor, see "Upgrading the
Monitor and Controller" on page 76.
Submenu Setting
[Software Upgrade] Upgrades the software for the monitor.
[Kernel Upgrade] Upgrades the kernel of the monitor.
[FPGA Upgrade] Upgrades the FPGA data of the
monitor.
[Maintenance]
The menu for the Sony service representative is
displayed.

[File Management] Menu

The system data is saved, copied, and deleted.
When [File Management] is selected, the following
menu is displayed.
Note
Use the BKM-16R with software version 1.6 or higher or
BKM-17R to use the File Management function.
[Save To]
Saves the data in the USB memory stick, etc.
Note
Use the USB memory stick, etc. after formatting.