Table of Contents
Advertisement
Submenu
Setting
Port C Input
Sets the input connector for the third
screen.
Select from among "SDI 1, " "SDI 2, "
"DVI-D, " "HDMI. "
Clipping Size
Sets the HD of 1920 × 1080 clipping size
for each port when using 2 or 3 screens
display.
Select from among "Normal, " "4:3, "
"5:4, " "Square1" to "Square5, "
"Overscan. "
Sub Screen Position
PIP
Sets the sub screen position for the 2 or
3 screens display (PIP).
Select from among "Lower Left, "
"Upper Left, " "Upper Right, " "Lower
Right. "
POP
Sets the sub screen position for the 2 or
3 screens display (POP).
Select from among "Right, " "Left. "
Note
Signals equivalent to 4K can display
only 1 screen for multiple displays.
For the signal type for using signals
equivalent to 4K, refer to "Available
signal formats" (page 30).
Pattern Skip
Sets the pattern that is skipped when
changing the displaying pattern by
pressing the PIP/POP button on the
front panel while displaying 2 or 3
screen displays.
Set to "Not Skip" or "Skip" for the PIP1,
PIP2, POP1, or POP2 pattern.
Input Configuration menu
Submenu
Setting
Input Name
Sets the name for each input connector.
Set the name of the SDI 1, SDI 2, DVI-
D, HDMI connector.
24
Adjustment Using the Menus
Endoscope
Laparoscope
Ultrasound
Recorder
Printer
PACS
C-arm
Room Camera
Surgical Camera
Microscope
Vital Device
Submenu
Setting
HDCP Setting
Sets the HDCP setting for signals input
in the DVI-D
Enable: Sets to use the signals
protected with HDCP.
Disable: Sets to use the signals not
protected with HDCP. When
"Disable" is set for the signals
not protected with HDCP,
signals are output from the DVI-
D
Note
When "Disable" is set for the signals
protected with HDCP, images are not
displayed.
System Configuration menu
Submenu
Setting
Control Lock
Control Lock
Set when you want to limit the
operation of the control panel. Set to
"Off" for no limit, "On" to limit.
Lock Mode
Sets the range to limit the operation of
the control panel. This setting is
available when "Control Lock" is set to
"On. "
Menu: Limits the menu operations
other than the control lock
setting.
Menu&Button: Limits all operations
other than the control lock
setting.
OSD Setting
Menu Position
Sets the menu position.
Select from among "Upper Left, "
"Upper Right, " "Lower Right, " and
"Lower Left. "
Status Display
Port, input connector name, control
lock, signal format, Scan/Zoom mode,
Flip Pattern, PIP/POP mode, and
A.I.M.E. are displayed.
Select Port Input connector
A.I.M.E. display
Flip
Pattern
PIP/POP mode
display
connector.
connector.
Control lock display
Signal Format
display
Scan/Zoom mode
Advertisement
Table of Contents
