Sony BVM-E251 Operating Instructions Manual page 44

Submenu Setting
About [S-LOG3(Live HDR)]
[S-LOG3(Live HDR)] is the setting for
which this unit is used as the reference
monitor in the S-Log3 Live HDR
workflow
Displays the S-Log3 input signal adding
the system gamma.
This system gamma is set so that the
compatibility with the monitoring of
the conventional (SDR) environment is
valued and you can perform suitable
picture expression without discomfort
when adjusting the picture of the HDR
camera.
1) Refer to the explanation of the Live
[HDMI Auto] Sets the manual or automatic setting for
the transmission matrix and color space
of the HDMI signal.


[RGB/YCC Range]
Submenu Setting
[RGB Range]
[HD] Sets the quantization range when a 4:4:4
RGB SDI signal is input and the signal
system is 1920 × 1080 or 1280 × 720.


[DC 2048×1080] Sets the quantization range when a 4:4:4
RGB SDI signal is input and the signal
system is 2048 × 1080.


[HDMI] Sets the display mode for the HDMI
signal.


44
Adjustment Using the Menus
1)
which Sony advocates.
HDR workflow on the "What's HDR"
page.
[Off]: Select to use the value set in the
[HD] or [SD] menu for the
transmission matrix and the
value set in the [Color Profile]
menu for the color space.
[On]: Select to set the transmission
matrix and color space
automatically according to the
input signal.
[Full]: 0 (black level) to 1023
(10bit)/4095 (12bit) (white level)
[Limit]: 64(10bit)/256 (12bit) (black
level) to 940 (10bit)/3760 (12bit)
(white level)
[Full]: 0 (black level) to 1023
(10bit)/4095 (12bit) (white level)
[Limit]: 64 (10bit)/256 (12bit)
(black level) to 940 (10bit)/3760
(12bit) (white level)
[Full]: 0 (black level) to 255 (8bit)/
1023 (10bit)/4095 (12bit) (white
level)
[Limit]: 16 (8bit)/64 (10bit)/256
(12bit) (black level) to 235 (8bit)/940
(10bit)/3760 (12bit) (white level)
Submenu Setting
[YCC Range]
[HDMI] Sets the display mode for the HDMI
signal.
[Full]: Y/Cb/Cr: 0 to 255 (8bit)/1023

(10bit)/4095 (12bit)
[Limit]: Y: 16 (8bit)/64 (10bit)/256

(12bit) to 235 (8bit)/940 (10bit)/
3760 (12bit)
Cb/Cr: 16 (8bit)/64 (10bit)/256
(12bit) to 240 (8bit)/960 (10bit)/
3840 (12bit)
[HDMI Auto] Sets the manual or automatic setting for
the quantization range of the HDMI
signal.
[Off]: Select to use the quantization

range set in the [HDMI] menu.
[On]: Select to set the quantization

range automatically according to the
input signal
[1080I/PsF]
Submenu Setting
[24PsF] Sets the display mode for the 1080/
24PsF signal.
[1080I]

[1080PsF]

[25PsF/50I] Sets the display mode for the 1080/
25PsF, 50i signal.
[1080I]

[1080PsF]

[30PsF/60I] Sets the display mode for the 1080/
30PsF, 60i signal.
[1080I]

[1080PsF]

[Copy From]
Submenu Setting
[Other CH] Copies other data in this monitor.
When the item is selected, you can
designate the channel to be copied.
[Other Monitor] Copies data from other monitor.
Note
Use the BVM-E251/BVM-E171 as a
source monitor to use the [Other
Monitor] function.
[Monitor ID] Enters the ID number of the source
monitor.
When the NETWORK switch is set to
PEER TO PEER, this is not selectable.
When the item is selected, you can
designate the source monitor.
When the ID number is entered, you
can designate the channel to be copied.