Select Fixtures Using The "Selection" -Toolbar; De-Selecting All Fixtures; Fixture Sub-Selection Using The Selection Toolbar - Infinity Chimp 100 User Manual

Infinity Chimp Series
14.1.5 Select Fixtures using the "Selection" –toolbar
From within the bottom toolbar, click on the button that reads Selection.
The toolbar will now be shown.
Selection
If you have fixtures selected, it may be used to further alter the current fixture selection (See "Fixture Sub-
Selection" for details).
If you do not have fixtures selected, Its selection options will be applied to all fixtures.

14.1.6 De-Selecting all Fixtures

To de-select fixtures, simply press the [0] –key on the keypad followed by [Enter].
You may also clear fixture selection by pressing the

14.1.7 Fixture Sub-Selection using the Selection Toolbar

Fixture Sub-Selection provides additional Fixture Selection features based on your current Fixture selection
set.
This means that all Sub-Selection functions are applied to your current Fixture selection.
If you do not have fixtures selected, the Fixture Sub-Selection will be applied to all fixtures instead. If you
select any of the Sub-Selection functions, the console will remember the full selection that you made
using the keypad, and will apply all sub select functions to this "Sub-Selection" memory.
Most Sub-Selection functions are easily accessed by using the Selection Toolbar. To open the Selection
Toolbar, click on the button that reads
Clicking on again will close the Selection-Toolbar.
Selection
However, some sub selection functions are accessed directly by hard keys on the console or the keypad.
Infinity Chimp Series
button on the Fixture Selection Toolbar:
Clear
from within the bottom toolbar.
Selection
94
Fig. 92: Selection Button