Merge Fixture(S) Into Group Using The Commandline Interface; Remove Fixtures From Groups; Remove Fixture(S) From A Group Using Group Split Widget; Infinity Chimp Series - Infinity Chimp 100 User Manual

Infinity Chimp Series

Fig. 96: Record Toolbar - Merge
Select the Group you would like to merge the selected fixtures into.
If you did not select an option from the Record-Toolbar, a dialog window asking you what to do will open
up. Click on Merge.

15.3.2 Merge Fixture(s) into Group using the Commandline Interface

Press the [Rec] key, followed by the [Group] key.
Select the Merge Option in the Record-Toolbar.
Now type the number of the group you would like to add the Fixtures to on the console's keypad, in
example, [1] followed by [Enter]:
[Rec] [Group] [1] [Enter]
If you did not select an option from the Record-Toolbar, a dialog window asking you what to do will be
shown. Click on Merge.

Remove Fixtures from Groups

To remove fixtures from a group, at first select the fixtures you would like to remove.

15.4.1 Remove Fixture(s) from a Group using Group Split Widget

Open a Group Split Widget by clicking on the Groups button in one of the side menus.
Hit the [Rec] key on the consoles frontpanel.
Now, select Remove from within the Record-Toolbar.
Fig. 97: Record Toolbar - Remove
Select the Group you would like to remove the selected fixtures from.
If you did not select an option from the Record-Toolbar, a dialog window asking you what to do will open
up. Click on Remove.

15.4.2 Remove Fixture(s) from Group using the Commandline Interface

Press the [Rec] key, followed by the [Group] key.
Infinity Chimp Series
101