Table of Contents
Advertisement
Infinity Chimp Series
Changing Cue Names, Timings and other Settings
To change Cue Names and Timings, you first need to open up a Cuelist Window as described previously.
As soon as the Cuelist View for the appropriate Cuelist has been opened up, select the cell with the
value you would like to change.
Multiple rows across the same column may be selected, however you can not select multiple columns at
the same time.
Press the [Set] key and enter the desired value.
: This column indicates the Cue number, which may be changed using the "Move Cue"
Cue ID
functionality
: This is the Name of the Cue, which may be modified to provide a brief description of the
Name
Cue
: This is the time that needs to pass until this cue will be started, use however depends on
Trig Time
the trigger selected for this Cue
: This is the duration of the crossfade for all fixtures increasing dimmer values.
In Fade
: This is the delay that needs to pass for this cue to start any in fade after it has been
In Delay
started.
: This is the duration of the crossfade for all fixtures that have decreasing dimmer values.
Out Fade
By default, the Out Fade is equivalent to the In Fade
: This is the delay that needs to pass for this cue to start any out fade after it has been
In Delay
started.
: This is the percentage of the overall cue time after all parameters that are set to be a
In Snap
"Snap-Channel" (in the fixure library) will snap to their new value.
: This is a column that may be used for additional comments. It is only shown in the
Comment
Cuelist View
Intensity Fade, Intensity Delay
this Cue.
Infinity Chimp Series
, etc: These are individual timings that may be set per attribute group in
152
Advertisement
Table of Contents
